Logo AND Algorithmique Numérique Distribuée

Public GIT Repository
allow python actors to be killed
[simgrid.git] / CMakeLists.txt
index 166dfae..6c85854 100644 (file)
@@ -32,32 +32,15 @@ if (CMAKE_COMPILER_IS_GNUCC)
   endif()
 endif()
 
-## We need a decent support of the c++11 standard
-include(CheckCXXCompilerFlag)
-CHECK_CXX_COMPILER_FLAG("-std=gnu++11" COMPILER_SUPPORTS_CXX11)
-if(COMPILER_SUPPORTS_CXX11)
-  set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=gnu++11")
-else() 
-  message(FATAL_ERROR 
-          "The compiler ${CMAKE_CXX_COMPILER} (v${CMAKE_CXX_COMPILER_VERSION}) has no C++11 support. "
-          "Please install a decent C++ compiler (remove CMakeCache.txt once it's installed).")
-endif()
-
-### And we need C11 standard, too
-include(CheckCCompilerFlag)
-CHECK_C_COMPILER_FLAG("-std=gnu11" COMPILER_SUPPORTS_C11)
-if(COMPILER_SUPPORTS_C11)
-  set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -std=gnu11")
-else()
-  message(FATAL_ERROR 
-          "The compiler ${CMAKE_C_COMPILER} (v${CMAKE_C_COMPILER_VERSION}) has no C11 support. "
-          "Please use a decent C compiler "
-          "(note that c++11 support of ${CMAKE_CXX_COMPILER} seems ok).")
-endif()
-if(APPLE AND (CMAKE_C_COMPILER_VERSION VERSION_LESS "4.6"))
-  ### gcc 4.[1-5] cannot compile ucontext on OSX
-  message(STATUS "Ucontext can't be used with this version of gcc (must be greater than 4.5)")
-  set(HAVE_UCONTEXT_H 0)
+## We need a decent support of the C++11 and C11 standards
+set(CMAKE_CXX_STANDARD 11)
+set(CMAKE_CXX_STANDARD_REQUIRED ON)
+
+set(CMAKE_C_STANDARD 11)
+set(CMAKE_C_STANDARD_REQUIRED ON)
+
+if (CMAKE_C_COMPILER_ID STREQUAL "Intel" AND CMAKE_C11_EXTENSION_COMPILE_OPTION STREQUAL "-std=c11")
+  set(CMAKE_C11_EXTENSION_COMPILE_OPTION "-std=gnu11")
 endif()
 
 ### Check threading support
@@ -87,12 +70,15 @@ if ((NOT DEFINED enable_smpi) OR enable_smpi)
     if(CMAKE_Fortran_COMPILER_ID MATCHES "GNU")
       set(SMPI_Fortran_FLAGS "\"-fpic\" \"-ff2c\" \"-fno-second-underscore\"")
       set(SMPI_Fortran_LIBS "\"-lgfortran\"")
+      set(SMPI_GFORTRAN 1)
     elseif(CMAKE_Fortran_COMPILER_ID MATCHES "Intel")
       set(SMPI_Fortran_FLAGS "\"-fPIC\" \"-nofor-main\"")
       set(SMPI_Fortran_LIBS "\"-lifcore\"")
+      set(SMPI_IFORT 1)
     elseif(CMAKE_Fortran_COMPILER_ID MATCHES "PGI|Flang") # flang
       set(SMPI_Fortran_FLAGS "\"-fPIC\"")
       set(SMPI_Fortran_LIBS "")
+      set(SMPI_FLANG 1)
     endif()
 
     set(SMPI_FORTRAN 1)
@@ -105,7 +91,7 @@ endif()
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
 
 set(SIMGRID_VERSION_MAJOR "3")
-set(SIMGRID_VERSION_MINOR "19")
+set(SIMGRID_VERSION_MINOR "21")
 set(SIMGRID_VERSION_PATCH "90")
 set(SIMGRID_VERSION_EXTRA "-DEVEL") # Extra words to add to version string (e.g. -rc1)
 
@@ -135,11 +121,6 @@ endif()
 execute_process(COMMAND ${CMAKE_LINKER} -version OUTPUT_VARIABLE LINKER_VERSION ERROR_VARIABLE LINKER_VERSION)
 string(REGEX MATCH "[0-9].[0-9]*" LINKER_VERSION "${LINKER_VERSION}")
 
-### Set the library providing dlopen
-if("${CMAKE_SYSTEM}" MATCHES "Linux")
-  find_library(DL_LIBRARY dl)
-endif("${CMAKE_SYSTEM}" MATCHES "Linux")
-
 ### Find programs and paths
 FIND_PROGRAM(GCOV_PATH gcov)
 include(FindPerl)
@@ -153,7 +134,7 @@ set(PythonInterp_FIND_VERSION_COUNT 1)
 set(PythonInterp_FIND_VERSION_MAJOR 3)
 include(FindPythonInterp)
 if(NOT PYTHONINTERP_FOUND)
-  message(FATAL_ERROR "Please install Python (version 3 or higher).")
+  message(FATAL_ERROR "Please install Python (version 3 or higher) to compile SimGrid.")
 endif()
 
 SET(LIBRARY_OUTPUT_PATH ${CMAKE_BINARY_DIR}/lib)
@@ -208,8 +189,6 @@ IF(CMAKE_SYSTEM_PROCESSOR MATCHES ".86|AMD64|amd64")
   ENDIF()
   if (WIN32)
     message(STATUS "Disable fast raw contexts on Windows.")
-  elseif(enable_address_sanitizer)
-    message(STATUS "Disable fast raw contexts with ASan")
   else()
     set(HAVE_RAW_CONTEXTS 1)
   endif()
@@ -258,15 +237,7 @@ if(enable_smpi_papi)
   endif()
 endif()
 
-# Not finding this is perfectly OK
-find_package(Boost COMPONENTS unit_test_framework)
-if (Boost_UNIT_TEST_FRAMEWORK_FOUND)
-  message(STATUS "Enabling the Boost-based unit tests.")
-else()
-  message(STATUS "Disabling the Boost-based unit tests -- please install libboost-test-dev.")
-endif()
-
-
+# But we do need the core of Boost
 find_package(Boost 1.48)
 if(Boost_FOUND)
   include_directories(${Boost_INCLUDE_DIRS})
@@ -278,17 +249,40 @@ else()
   endif()
 endif()
 
-find_package(Boost COMPONENTS context)
-set(Boost_FOUND 1) # This component is optional
+# cmake before 3.13.1 does not know about stacktrace components. Fix it.
+# Usable components: https://www.boost.org/doc/libs/1_65_1/doc/html/stacktrace/configuration_and_build.html
+set(_Boost_STACKTRACE_HEADERS           "boost/stacktrace.hpp")
+set(_Boost_STACKTRACE_BACKTRACE_HEADERS "boost/stacktrace.hpp")
+
+find_package(Boost 1.59 COMPONENTS context stacktrace_backtrace unit_test_framework)
+set(Boost_FOUND 1) # These components are optionals
+message(STATUS "Mandatory components found. SimGrid is compilable.")
+message(STATUS "Looking for optional Boost components:")
+
+if (Boost_STACKTRACE_BACKTRACE_FOUND)
+  message (STATUS "  stacktrace: found. Activating human-readable stack traces.")
+  set(HAVE_BOOST_STACKTRACE 1)
+  set(SIMGRID_DEP "${SIMGRID_DEP} -lboost_stacktrace_backtrace")
+else()
+  message (STATUS "  stacktrace: MISSING. Install libboost-stacktrace-dev to display the stacktraces.")
+  set(HAVE_BOOST_STACKTRACE 0)
+endif()
+
 if(Boost_CONTEXT_FOUND)
-  message(STATUS "Found Boost.Context")
+  message (STATUS "  context: found. Activating Boost contexts.")
   set(HAVE_BOOST_CONTEXTS 1)
 else()
-  message ("   boost        : found.")
-  message ("   boost-context: missing. Install libboost-context-dev for this optional feature.")
+  message (STATUS "  context: MISSING. Install libboost-context-dev for this optional feature.")
   set(HAVE_BOOST_CONTEXTS 0)
 endif()
 
+if (Boost_UNIT_TEST_FRAMEWORK_FOUND)
+  message(STATUS  "  unit_test_framework: found. Activating the Boost-based unit tests.")
+else()
+  message(STATUS  "  unit_test_framework: MISSING. Install libboost-test-dev (>= v1.59) to activate the Unit Tests.")
+endif()
+
+
 # Checks for header libraries functions.
 CHECK_LIBRARY_EXISTS(rt      clock_gettime           "" HAVE_POSIX_GETTIME)
 
@@ -307,20 +301,17 @@ endif()
 
 CHECK_INCLUDE_FILE("valgrind/valgrind.h" HAVE_VALGRIND_H)
 CHECK_INCLUDE_FILE("unistd.h" HAVE_UNISTD_H)
-CHECK_INCLUDE_FILE("execinfo.h" HAVE_EXECINFO_H)
 CHECK_INCLUDE_FILE("signal.h" HAVE_SIGNAL_H)
 CHECK_INCLUDE_FILE("sys/param.h" HAVE_SYS_PARAM_H)
 CHECK_INCLUDE_FILE("sys/sysctl.h" HAVE_SYS_SYSCTL_H)
 CHECK_INCLUDE_FILE("ucontext.h" HAVE_UCONTEXT_H)
 CHECK_INCLUDE_FILE("linux/futex.h" HAVE_FUTEX_H)
 
-CHECK_FUNCTION_EXISTS(backtrace HAVE_BACKTRACE)
 CHECK_FUNCTION_EXISTS(dlfunc HAVE_DLFUNC)
 CHECK_FUNCTION_EXISTS(gettimeofday HAVE_GETTIMEOFDAY)
 CHECK_FUNCTION_EXISTS(nanosleep HAVE_NANOSLEEP)
 CHECK_FUNCTION_EXISTS(getdtablesize HAVE_GETDTABLESIZE)
 CHECK_FUNCTION_EXISTS(sysconf HAVE_SYSCONF)
-CHECK_FUNCTION_EXISTS(popen HAVE_POPEN)
 CHECK_FUNCTION_EXISTS(process_vm_readv HAVE_PROCESS_VM_READV)
 CHECK_FUNCTION_EXISTS(mmap HAVE_MMAP)
 CHECK_FUNCTION_EXISTS(mremap HAVE_MREMAP)
@@ -333,18 +324,6 @@ if(MINGW)
   set(HAVE_VASPRINTF 1)
 endif()
 
-#Check if __thread is defined
-execute_process(
-  COMMAND "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_thread_storage.c -o testprog"
-  WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
-  RESULT_VARIABLE HAVE_thread_storage_run)
-file(REMOVE testprog)
-if(HAVE_thread_storage_run)
-  set(HAVE_THREAD_LOCAL_STORAGE 1)
-else()
-  set(HAVE_THREAD_LOCAL_STORAGE 0)
-endif()
-
 CHECK_INCLUDE_FILE("sys/sendfile.h" HAVE_SENDFILE_H)
 CHECK_FUNCTION_EXISTS(sendfile HAVE_SENDFILE)
 if(HAVE_SENDFILE_H AND HAVE_SENDFILE)
@@ -358,7 +337,7 @@ if(enable_model-checking AND NOT "${CMAKE_SYSTEM}" MATCHES "Linux|FreeBSD")
   set(enable_model-checking FALSE)
 endif()
 
-if(HAVE_MMAP AND HAVE_THREAD_LOCAL_STORAGE)
+if(HAVE_MMAP)
   SET(HAVE_MMALLOC 1)
 else()
   SET(HAVE_MMALLOC 0)
@@ -425,81 +404,7 @@ else()
 endif()
 
 #--------------------------------------------------------------------------------------------------
-### Initialize of CONTEXT THREADS
-
-set(HAVE_THREAD_CONTEXTS 0)
-if(CMAKE_USE_PTHREADS_INIT)
-  ### Test that we have a way to create semaphores
-
-  set(HAVE_SEM_OPEN 0)
-  CHECK_LIBRARY_EXISTS(pthread sem_open "" HAVE_SEM_OPEN_LIB)
-  if(HAVE_SEM_OPEN_LIB)
-    try_run(semopen_retval semopen_compilable
-            ${CMAKE_BINARY_DIR}
-            ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_open.c
-           LINK_LIBRARIES pthread
-           COMPILE_OUTPUT_VARIABLE semopen_compilmsg
-            RUN_OUTPUT_VARIABLE semopen_runmsg)
-    
-    if(semopen_compilable)
-      if(NOT semopen_retval) # error if not 0
-        message(STATUS "sem_open is compilable and executable")
-       set(HAVE_SEM_OPEN 1)
-      else()
-        message(STATUS "Warning: sem_open seems compilable but not executable")
-        message(STATUS "Compilation output: ${semopen_compilmsg}")
-        message(STATUS "Execution output: ${semopen_runmsg}")
-        message(STATUS "Exit value: ${semopen_retval}")
-      endif()
-    else()
-      message(STATUS "Warning: sem_open not compilable")
-      message(STATUS "Compilation output: ${semopen_compilmsg}")
-    endif()
-    unset(semopen_compilable)
-    unset(semopen_retval)
-    unset(semopen_runmsg)
-    unset(semopen_compilmsg)
-  endif()
-
-  set(HAVE_SEM_INIT 0)  
-  if(NOT APPLE) # OS X El Capitan deprecates this function
-    CHECK_LIBRARY_EXISTS(pthread sem_init "" HAVE_SEM_INIT_LIB)
-  endif()
-  if(HAVE_SEM_INIT_LIB)
-    try_run(seminit_retval seminit_compilable
-            ${CMAKE_BINARY_DIR}
-            ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_init.c
-           LINK_LIBRARIES pthread
-           COMPILE_OUTPUT_VARIABLE seminit_compilmsg
-            RUN_OUTPUT_VARIABLE seminit_runmsg)
-    
-    if(seminit_compilable)
-      if(NOT seminit_retval) # error if not 0
-        message(STATUS "sem_init is compilable and executable")
-       set(HAVE_SEM_INIT 1)
-      else()
-        message(STATUS "Warning: sem_init seems compilable but not executable")
-        message(STATUS "Compilation output: ${seminit_compilmsg}")
-        message(STATUS "Execution output: ${seminit_runmsg}")
-        message(STATUS "Exit value: ${seminit_retval}")
-      endif()
-    else()
-      message(STATUS "Warning: sem_init not compilable")
-      message(STATUS "Compilation output: ${seminit_compilmsg}")
-    endif()
-    unset(seminit_compilable)
-    unset(seminit_retval)
-    unset(seminit_runmsg)
-    unset(seminit_compilmsg)
-  endif()
-
-  if(NOT HAVE_SEM_OPEN AND NOT HAVE_SEM_INIT)
-    message(FATAL_ERROR "Semaphores are not usable (failed to use both sem_open and sem_init), but they are mandatory to threads (you may need to mount /dev).")
-  endif()
-
-  set(HAVE_THREAD_CONTEXTS 1)
-  message(STATUS "Support for thread context factory ok.")
-endif()
+### Check what context backends are available
 
 set(HAVE_UCONTEXT_CONTEXTS 0)
 if(NOT HAVE_UCONTEXT_H)
@@ -507,8 +412,6 @@ if(NOT HAVE_UCONTEXT_H)
 elseif(APPLE)
   message(STATUS "No ucontext factory: Apple don't want us to use them.")
   set(HAVE_UCONTEXT_H 0)
-elseif(enable_address_sanitizer)
-  message(STATUS "No ucontext factory: ASan does not support it (see http://code.google.com/p/address-sanitizer/issues/detail?id=189)")
 else()
   try_compile(compile_makecontext ${CMAKE_BINARY_DIR} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_makecontext.c
     OUTPUT_VARIABLE compile_makecontext_output)
@@ -562,12 +465,6 @@ endif()
 file(REMOVE test_stackgrowth)
 #--------------------------------------------------------------------------------------------------
 
-### check for addr2line
-find_path(ADDR2LINE NAMES addr2line    PATHS NO_DEFAULT_PATHS)
-if(ADDR2LINE)
-  set(ADDR2LINE "${ADDR2LINE}/addr2line")
-endif()
-
 ###############
 ## GIT version check
 ##
@@ -619,11 +516,11 @@ endif()
 
 # Avoid triggering a (full) rebuild by touching the files if they did not really change
 configure_file("${CMAKE_HOME_DIRECTORY}/tools/cmake/src/internal_config.h.in" "${CMAKE_BINARY_DIR}/src/internal_config.h.generated"    @ONLY IMMEDIATE)
-configure_file("${CMAKE_HOME_DIRECTORY}/include/simgrid_config.h.in"          "${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated" @ONLY IMMEDIATE)
+configure_file("${CMAKE_HOME_DIRECTORY}/include/simgrid/config.h.in"          "${CMAKE_BINARY_DIR}/include/simgrid/config.h.generated" @ONLY IMMEDIATE)
 execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/src/internal_config.h.generated ${CMAKE_BINARY_DIR}/src/internal_config.h)
-execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated ${CMAKE_BINARY_DIR}/include/simgrid_config.h)
+execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/include/simgrid/config.h.generated ${CMAKE_BINARY_DIR}/include/simgrid/config.h)
 file(REMOVE ${CMAKE_BINARY_DIR}/src/internal_config.h.generated)
-file(REMOVE ${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated)
+file(REMOVE ${CMAKE_BINARY_DIR}/include/simgrid/config.h.generated)
 
 # We need two versions of the SMPI scripts because they contain the path to the library
 # so, it depends of whether SimGrid is installed, or run from the sources (during the build)
@@ -640,7 +537,8 @@ if(NS3_LIBRARY_PATH)
   set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
 endif()
 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
-set(SMPIMAIN smpimain)
+set(SMPIMAIN ${libdir}/simgrid/smpimain)
+set(SMPIREPLAYMAIN ${libdir}/simgrid/smpireplaymain)
 
 configure_file(${CMAKE_HOME_DIRECTORY}/include/smpi/mpif.h.in ${CMAKE_BINARY_DIR}/include/smpi/mpif.h @ONLY)
 #configure mpif.f90 to build mpi.mod
@@ -668,7 +566,8 @@ if(NS3_LIBRARY_PATH)
   set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
 endif()
 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
-set(SMPIMAIN ${CMAKE_BINARY_DIR}/bin/smpimain)
+set(SMPIMAIN ${CMAKE_BINARY_DIR}/lib/simgrid/smpimain)
+set(SMPIREPLAYMAIN ${CMAKE_BINARY_DIR}/lib/simgrid/smpireplaymain)
 
 foreach(script cc cxx ff f90 run)
   configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpi${script}.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpi${script} @ONLY)
@@ -683,7 +582,7 @@ endif()
 
 set(generated_headers_to_install
   ${CMAKE_CURRENT_BINARY_DIR}/include/smpi/mpif.h
-  ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid_config.h
+  ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid/config.h
   )
 
 set(generated_headers  ${CMAKE_CURRENT_BINARY_DIR}/src/internal_config.h )
@@ -704,7 +603,7 @@ set(generated_files_to_clean
 if(NOT "${CMAKE_BINARY_DIR}" STREQUAL "${CMAKE_HOME_DIRECTORY}")
   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt COPYONLY)
   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt COPYONLY)
-  configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allReduce.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt COPYONLY)
+  configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allreduce.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allreduce.txt COPYONLY)
   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_barrier.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt COPYONLY)
   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_bcast.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt COPYONLY)
   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_with_isend.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt COPYONLY)
@@ -754,11 +653,27 @@ if(NOT "${CMAKE_BINARY_DIR}" STREQUAL "${CMAKE_HOME_DIRECTORY}")
   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt COPYONLY)
   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt COPYONLY)
 
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/compute_only.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions0.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions1.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/empty.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/empty/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty/actions0.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/empty/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty/actions1.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/mixed.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/mixed/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed/actions0.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/mixed/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed/actions1.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_compute ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive2 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive2 COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_compute_simple ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_simple COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time_and_resources ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time_and_resources COPYONLY)
+
   set(generated_files_to_clean
     ${generated_files_to_clean}
     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt
     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt
-    ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allreduce.txt
     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt
     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt
     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt
@@ -804,6 +719,31 @@ if(NOT "${CMAKE_BINARY_DIR}" STREQUAL "${CMAKE_HOME_DIRECTORY}")
     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt
     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt
     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only.txt
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions0.txt
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions1.txt
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty.txt
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty/actions0.txt
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty/actions1.txt
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed.txt
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed/actions0.txt
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed/actions1.txt
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/replay_multiple_manual.tesh
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive2
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_simple
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_empty1
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_empty2
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_empty2_same_resources
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_empty2_same_time
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_empty2_same_time_and_resources
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed1
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_resources
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time_and_resources
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_nojob
     )
 endif()
 
@@ -828,6 +768,29 @@ if(enable_java)
   include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Java.cmake)
 endif()
 
+# Python binding, generated with pybind11
+set(PYBIND11_CPP_STANDARD -std=c++11)
+find_package(pybind11 2.2.0)
+if(NOT PYTHONLIBS_FOUND)
+  set(pybind11_FOUND OFF)
+endif()
+option(enable_python "Whether the Python bindings are activated." ${pybind11_FOUND}) # ON by default if dependencies are met
+
+if(enable_python)
+  if(pybind11_FOUND)
+    pybind11_add_module(simgrid_python src/bindings/python/simgrid_python.cpp)
+    set_source_files_properties(src/bindings/python/simgrid_python.cpp PROPERTIES COMPILE_FLAGS -std=c++14)
+    target_link_libraries(simgrid_python PUBLIC simgrid)
+    set_target_properties(simgrid_python PROPERTIES LIBRARY_OUTPUT_NAME simgrid)
+    set_property(TARGET simgrid_python
+                 APPEND PROPERTY INCLUDE_DIRECTORIES "${INTERNAL_INCLUDES}")
+  else()
+    message(FATAL_ERROR "Please install pybind11-dev to build the Python bindings (or disable that option).")
+  endif()
+endif()
+mark_as_advanced(PYBIND11_PYTHON_VERSION)
+mark_as_advanced(pybind11_DIR)
+
 ### Make tests
 if(enable_memcheck_xml)
   set(enable_memcheck true)
@@ -861,9 +824,9 @@ foreach(line ${config_output})
   message("   ${line}")
 endforeach()
 message("##########################################")
-message("####   Content of simgrid_config.h    ####")
+message("####   Content of simgrid/config.h    ####")
 message("##########################################")
-file(STRINGS ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid_config.h config_output)
+file(STRINGS ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid/config.h config_output)
 LIST(REMOVE_AT config_output 0 1 2 3 4 5 6 7 8 9 -1) # Pass the file header
 foreach(line ${config_output})
   message("   ${line}")
@@ -919,6 +882,12 @@ if (${Java_FOUND})
 else()
   message("        Compile Java ................: NO")
 endif()
+if(pybind11_FOUND)
+  message("        Compile Python bindings .....: ${enable_python}")
+  message("          module ....................: ${PYTHON_MODULE_PREFIX}simgrid${PYTHON_MODULE_EXTENSION}")
+else()
+  message("        Compile Python bindings .....: NO (disabled, or pybind11 not found)")
+endif()
 message("        Compile Lua .................: ${SIMGRID_HAVE_LUA}")
 message("        Compile Smpi ................: ${HAVE_SMPI}")
 message("          Smpi fortran ..............: ${SMPI_FORTRAN}")