use strict;
+use strict;
+use Getopt::Long qw(GetOptions);
+
my $progname="sg_unit_extractor";
# Get the args
-die "USAGE: $progname infile [outfile]\n"
- if (scalar @ARGV == 0 || scalar @ARGV > 2);
-my ($infile,$outfile) = @ARGV;
-
-if (not defined($outfile)) {
- $outfile = $infile;
- $outfile =~ s/\.c$/_unit.c/;
- $outfile =~ s|.*/([^/]*)$|$1| if $outfile =~ m|/|;
-}
-# Get the unit data
-my ($unit_source,$suite_name,$suite_title)=("","","");
-my (%tests); # to detect multiple definition
-my (@tests); # actual content
-
-open IN, "$infile" || die "$progname: Cannot open input file '$infile': $!\n";
-
-my $takeit=0;
-my $line=0;
-my $beginline=0;
-while (<IN>) {
- $line++;
- if (m/ifdef +SIMGRID_TEST/) {
- $beginline = $line;
- $takeit = 1;
- next;
- }
- if (m/endif.*SIMGRID_TEST/) {
- $takeit = 0;
- next
- }
-
- if (m/XBT_TEST_SUITE\(\w*"([^"]*)"\w*,(.*?)\);/) { #"
- die "$progname: Multiple suites in the same file ($infile) are not supported yet\n"
- if length($suite_name);
- ($suite_name,$suite_title)=($1,$2);
- next;
- }
-
- if (m/XBT_TEST_UNIT\(\w*"([^"]*)"\w*,([^,]*),(.*?)\)/) { #"
- die "$progname: multiply defined unit in file $infile: $1\n"
- if (defined($tests{$1}));
-
- my @t=($1,$2,$3);
- push @tests,\@t;
- $tests{$1} = 1;
- }
- $unit_source .= $_ if $takeit;
+sub usage($) {
+ my $ret;
+ print "USAGE: $progname [--root=part/to/cut] [--path=where/to/search NOT WORKING] [--outdir=where/to/generate/files] infile [infile+]\n";
+ exit $ret;
}
-close IN || die "$progname: cannot close input file '$infile': $!\n";
+my $path=undef;
+my $outdir=undef;
+my $root;
+my $help;
+
+Getopt::Long::config('permute','no_getopt_compat', 'no_auto_abbrev');
+GetOptions(
+ 'help|h' => sub {usage(0)},
+ 'root=s' =>\$root,
+ 'path=s' =>\$path,
+ 'outdir=s' =>\$outdir) or usage(1);
+
+usage(1) if (scalar @ARGV == 0);
+
+map {process_one($_)} @ARGV;
+
+sub process_one($) {
+ my $infile = shift;
+ my $outfile;
+
+ $infile =~ s|src/|| unless (-e $infile);
+
+ $outfile = $infile;
+ $outfile =~ s/\.c$/_unit.c/;
+ $outfile =~ s|.*/([^/]*)$|$1| if $outfile =~ m|/|;
+ $outfile = "$outdir$outfile";
+
+ print "$progname: processing $infile (generating $outfile)...\n";
+
+ # Get the unit data
+ my ($unit_source,$suite_name,$suite_title)=("","","");
+ my (%tests); # to detect multiple definition
+ my (@tests); # actual content
+
+ open IN, "$infile" || die "$progname: Cannot open input file '$infile': $!\n";
+ $infile =~ s|$root|| if defined($root);
+
+ my $takeit=0;
+ my $line=0;
+ my $beginline=0;
+ while (<IN>) {
+ $line++;
+ if (m/ifdef +SIMGRID_TEST/) {
+ $beginline = $line;
+ $takeit = 1;
+ next;
+ }
+ if (m/endif.*SIMGRID_TEST/) {
+ $takeit = 0;
+ next
+ }
+
+ if (m/XBT_TEST_SUITE\(\w*"([^"]*)"\w*, *(.*?)\);/) { #" {
+ die "$progname: Multiple suites in the same file ($infile) are not supported yet\n" if length($suite_name);
+ ($suite_name,$suite_title)=($1,$2);
+ die "$progname: Empty suite name in $infile" unless length($suite_name);
+ die "$progname: Empty suite title in $infile" unless length($suite_title);
+ next;
+ } elsif (m/XBT_TEST_SUITE/) {
+ die "$progname: Parse error: This line seem to be a test suite declaration, but failed to parse it\n$_\n";
+ }
+
+ if (m/XBT_TEST_UNIT\(\w*"([^"]*)"\w*,([^,]*),(.*?)\)/) { #"{
+ die "$progname: multiply defined unit in file $infile: $1\n" if (defined($tests{$1}));
+
+ my @t=($1,$2,$3);
+ push @tests,\@t;
+ $tests{$1} = 1;
+ } elsif (m/XBT_TEST_UNIT/) {
+ die "$progname: Parse error: This line seem to be a test unit, but failed to parse it\n$_\n";
+ }
+ $unit_source .= $_ if $takeit;
+ }
+ close IN || die "$progname: cannot close input file '$infile': $!\n";
-if ($takeit) {
- die "$progname: end of file reached in SIMGRID_TEST block.\n".
- "You should end each of the with a line matching: /endif.*SIMGRID_TEST/\n".
- "Example:\n".
- "#endif /* SIMGRID_TEST */\n"
-}
-die "$progname: no suite defined in $infile\n"
- unless (length($suite_name));
+ if ($takeit) {
+ die "$progname: end of file reached in SIMGRID_TEST block.\n".
+ "You should end each of the with a line matching: /endif.*SIMGRID_TEST/\n".
+ "Example:\n".
+ "#endif /* SIMGRID_TEST */\n"
+ }
+
+ die "$progname: no suite defined in $infile\n" unless (length($suite_name));
-# Write the test
-
-my ($GENERATED)=("/*******************************/\n".
- "/* GENERATED FILE, DO NOT EDIT */\n".
- "/*******************************/\n\n");
-$beginline+=2;
-open OUT,">$outfile" || die "$progname: Cannot open output file '$outfile': $!\n";
-print OUT $GENERATED;
-print OUT "#include <stdio.h>\n";
-print OUT "#include \"xbt.h\"\n";
-print OUT $GENERATED;
-print OUT "# $beginline \"$infile\" \n";
-print OUT "$unit_source";
-print OUT $GENERATED;
-close OUT || die "$progname: Cannot close output file '$outfile': $!\n";
-
-# write the main skeleton if needed
-if (! -e "simgrid_units_main.c") {
- open OUT,">simgrid_units_main.c" || die "$progname: Cannot open main file 'simgrid_units_main.c': $!\n";
- print OUT $GENERATED;
- print OUT "#include <stdio.h>\n\n";
- print OUT "#include \"xbt.h\"\n\n";
- print OUT "extern xbt_test_unit_t _xbt_current_unit;\n\n";
- print OUT "/* SGU: BEGIN PROTOTYPES */\n";
- print OUT "/* SGU: END PROTOTYPES */\n\n";
- print OUT $GENERATED;
-# print OUT "# 93 \"sg_unit_extractor.pl\"\n";
- print OUT <<EOF;
+ # Write the test
+
+ my ($GENERATED)=("/*******************************/\n".
+ "/* GENERATED FILE, DO NOT EDIT */\n".
+ "/*******************************/\n\n");
+ $beginline+=2;
+ open OUT,">$outfile" || die "$progname: Cannot open output file '$outfile': $!\n";
+ print OUT $GENERATED;
+ print OUT "#include <stdio.h>\n";
+ print OUT "#include \"xbt.h\"\n";
+ print OUT $GENERATED;
+ print OUT "#line $beginline \"$infile\" \n";
+ print OUT "$unit_source";
+ print OUT $GENERATED;
+ close OUT || die "$progname: Cannot close output file '$outfile': $!\n";
+
+ # write the main skeleton if needed
+ if (! -e "${outdir}simgrid_units_main.c") {
+ open OUT,">${outdir}simgrid_units_main.c" || die "$progname: Cannot open main file '${outdir}simgrid_units_main.c': $!\n";
+ print OUT $GENERATED;
+ print OUT "#include <stdio.h>\n\n";
+ print OUT "#include \"xbt.h\"\n\n";
+ print OUT "extern xbt_test_unit_t _xbt_current_unit;\n\n";
+ print OUT "/* SGU: BEGIN PROTOTYPES */\n";
+ print OUT "/* SGU: END PROTOTYPES */\n\n";
+ print OUT $GENERATED;
+ # print OUT "# 93 \"sg_unit_extractor.pl\"\n";
+ print OUT <<EOF;
int main(int argc, char *argv[]) {
xbt_test_suite_t suite;
char selection[1024];
- int i;\n
- int res;\n
+ int verbosity = 0;
+ int i;
+ int res;
+
/* SGU: BEGIN SUITES DECLARATION */
/* SGU: END SUITES DECLARATION */
strcat(selection, \",\");
strcat(selection, p);
}
- } else if (!strncmp(argv[i],\"--dump-only\",strlen(\"--dump-only\"))||
- !strncmp(argv[i],\"--dump\", strlen(\"--dump\"))) {
+ } else if (!strcmp(argv[i], \"--verbose\")) {
+ verbosity++;
+ } else if (!strcmp(argv[i], \"--dump-only\")||
+ !strcmp(argv[i], \"--dump\")) {
xbt_test_dump(selection);
return 0;
- } else if (!strncmp(argv[i],\"--help\",strlen(\"--help\"))) {
+ } else if (!strcmp(argv[i], \"--help\")) {
printf(
"Usage: testall [--help] [--tests=selection] [--dump-only]\\n\\n"
"--help: display this help\\n"
+ "--verbose: print the name for each running test\\n"
"--dump-only: don't run the tests, but display some debuging info about the tests\\n"
"--tests=selection: Use argument to select which suites/units/tests to run\\n"
" --tests can be used more than once, and selection may be a comma\\n"
}
/* Got all my tests to do */
- res = xbt_test_run(selection);
- xbt_exit();
+ res = xbt_test_run(selection, verbosity);
+ xbt_test_exit();
return res;
}
EOF
- print OUT $GENERATED;
- close OUT || die "$progname: Cannot close main file 'simgrid_units_main.c': $!\n";
-}
-
-print " Suite $suite_name: $suite_title (".(scalar @tests)." tests)\n";
-map {
- my ($name,$func,$title) = @{$_};
- print " unit $name: func=$func; title=$title\n";
-} @tests;
-
-#while (my $t = shift @tests) {
-
-# add this suite to the main
-my $newmain="";
-open IN,"simgrid_units_main.c" || die "$progname: Cannot open main file 'simgrid_units_main.c': $!\n";
- # search prototypes
- while (<IN>) {
- $newmain .= $_;
-# print "Look for proto: $_";
- last if /SGU: BEGIN PROTOTYPES/;
- }
-
- # search my prototype
- while (<IN>) {
-# print "Seek protos: $_";
- last if (/SGU: END PROTOTYPES/ || /SGU: BEGIN FILE $infile/);
- $newmain .= $_;
- }
- if (/SGU: BEGIN FILE $infile/) { # found an old section for this file. Kill it
- while (<IN>) {
- last if /SGU: END FILE/;
- }
- $_ = <IN>; # pass extra blank line
- chomp;
- die "this line should be blank ($_). Did you edit the file?" if /\W/;
- }
- my ($old_)=($_);
- # add my section
- $newmain .= " /* SGU: BEGIN FILE $infile */\n";
- map {
- my ($name,$func,$title) = @{$_};
- $newmain .= " void $func(void);\n"
- } @tests;
-
- $newmain .= " /* SGU: END FILE */\n\n";
- if ($old_ =~ /SGU: BEGIN FILE/ || $old_ =~ /SGU: END PROTOTYPES/) {
- $newmain .= $old_;
- }
-
- # pass remaining prototypes, search declarations
- while (<IN>) {
- $newmain .= $_ unless /SGU: END PROTOTYPES/;
- last if /SGU: BEGIN SUITES DECLARATION/;
- }
-
- ### Done with prototypes. And now, the actual code
-
- # search my prototype
- while (<IN>) {
- last if (/SGU: END SUITES DECLARATION/ || /SGU: BEGIN FILE $infile/);
- $newmain .= $_;
- }
- if (/SGU: BEGIN FILE $infile/) { # found an old section for this file. Kill it
- while (<IN>) {
- last if /SGU: END FILE/;
+ print OUT $GENERATED;
+ close OUT || die "$progname: Cannot close main file '${outdir}simgrid_units_main.c': $!\n";
}
- $_ = <IN>; # pass extra blank line
- chomp;
- die "this line should be blank ($_). Did you edit the file?" if /\W/;
- }
- my ($old_)=($_);
- # add my section
- $newmain .= " /* SGU: BEGIN FILE $infile */\n";
- $newmain .= " suite = xbt_test_suite_by_name(\"$suite_name\",$suite_title);\n";
- map {
- my ($name,$func,$title) = @{$_};
- $newmain .= " xbt_test_suite_push(suite, \"$name\", $func, $title);\n";
- } @tests;
-
- $newmain .= " /* SGU: END FILE */\n\n";
- if ($old_ =~ /SGU: BEGIN FILE/ || $old_ =~ /SGU: END SUITES DECLARATION/) {
- $newmain .= $old_;
- }
-
- # pass the remaining
- while (<IN>) {
- $newmain .= $_;
- }
-close IN || die "$progname: Cannot close main file 'simgrid_units_main.c': $!\n";
-
-# write it back to main
-open OUT,">simgrid_units_main.c" || die "$progname: Cannot open main file 'simgrid_units_main.c': $!\n";
-print OUT $newmain;
-close OUT || die "$progname: Cannot close main file 'simgrid_units_main.c': $!\n";
+
+ print " Suite $suite_name: $suite_title (".(scalar @tests)." tests)\n";
+ map {
+ my ($name,$func,$title) = @{$_};
+ print " unit $name: func=$func; title=$title\n";
+ } @tests;
+
+ #while (my $t = shift @tests) {
+
+ # add this suite to the main
+ my $newmain="";
+ open IN,"${outdir}simgrid_units_main.c" || die "$progname: Cannot open main file '${outdir}simgrid_units_main.c': $!\n";
+ # search prototypes
+ while (<IN>) {
+ $newmain .= $_;
+ # print "Look for proto: $_";
+ last if /SGU: BEGIN PROTOTYPES/;
+ }
+
+ # search my prototype
+ while (<IN>) {
+ # print "Seek protos: $_";
+ last if (/SGU: END PROTOTYPES/ || /SGU: BEGIN FILE $infile/);
+ $newmain .= $_;
+ }
+ if (/SGU: BEGIN FILE $infile/) { # found an old section for this file. Kill it
+ while (<IN>) {
+ last if /SGU: END FILE/;
+ }
+ $_ = <IN>; # pass extra blank line
+ chomp;
+ die "this line should be blank ($_). Did you edit the file?" if /\W/;
+ }
+ my ($old_)=($_);
+ # add my section
+ $newmain .= " /* SGU: BEGIN FILE $infile */\n";
+ map {
+ my ($name,$func,$title) = @{$_};
+ $newmain .= " void $func(void);\n"
+ } @tests;
+
+ $newmain .= " /* SGU: END FILE */\n\n";
+ if ($old_ =~ /SGU: BEGIN FILE/ || $old_ =~ /SGU: END PROTOTYPES/) {
+ $newmain .= $old_;
+ }
+
+ # pass remaining prototypes, search declarations
+ while (<IN>) {
+ $newmain .= $_ unless /SGU: END PROTOTYPES/;
+ last if /SGU: BEGIN SUITES DECLARATION/;
+ }
+
+ ### Done with prototypes. And now, the actual code
+
+ # search my prototype
+ while (<IN>) {
+ last if (/SGU: END SUITES DECLARATION/ || /SGU: BEGIN FILE $infile/);
+ $newmain .= $_;
+ }
+ if (/SGU: BEGIN FILE $infile/) { # found an old section for this file. Kill it
+ while (<IN>) {
+ last if /SGU: END FILE/;
+ }
+ $_ = <IN>; # pass extra blank line
+ chomp;
+ die "this line should be blank ($_). Did you edit the file?" if /\W/;
+ }
+ my ($old_)=($_);
+ # add my section
+ $newmain .= " /* SGU: BEGIN FILE $infile */\n";
+ $newmain .= " suite = xbt_test_suite_by_name(\"$suite_name\",$suite_title);\n";
+ map {
+ my ($name,$func,$title) = @{$_};
+ $newmain .= " xbt_test_suite_push(suite, \"$name\", $func, $title);\n";
+ } @tests;
+
+ $newmain .= " /* SGU: END FILE */\n\n";
+ if ($old_ =~ /SGU: BEGIN FILE/ || $old_ =~ /SGU: END SUITES DECLARATION/) {
+ $newmain .= $old_;
+ }
+
+ # pass the remaining
+ while (<IN>) {
+ $newmain .= $_;
+ }
+ close IN || die "$progname: Cannot close main file '${outdir}simgrid_units_main.c': $!\n";
+
+ # write it back to main
+ open OUT,">${outdir}simgrid_units_main.c" || die "$progname: Cannot open main file '${outdir}simgrid_units_main.c': $!\n";
+ print OUT $newmain;
+ close OUT || die "$progname: Cannot close main file '${outdir}simgrid_units_main.c': $!\n";
+} # end if process_one($)
0;
