-/* Copyright (c) 2004-2016. The SimGrid Team. All rights reserved. */
+/* Copyright (c) 2004-2019. The SimGrid Team. All rights reserved. */
/* This program is free software; you can redistribute it and/or modify it
* under the terms of the license (GNU LGPL) which comes with this package. */
-#include "src/simix/smx_private.h" /* MSG_task_listen looks inside the rdv directly. Not clean. */
-#include "msg_private.h"
-#include "mc/mc.h"
-#include "xbt/log.h"
-#include "xbt/sysdep.h"
+#include "simgrid/Exception.hpp"
+#include <cmath>
-XBT_LOG_NEW_DEFAULT_SUBCATEGORY(msg_gos, msg,
- "Logging specific to MSG (gos)");
+#include "simgrid/s4u/Comm.hpp"
+#include "simgrid/s4u/Mailbox.hpp"
+#include "src/instr/instr_private.hpp"
+#include "src/kernel/activity/ExecImpl.hpp"
+#include "src/msg/msg_private.hpp"
+#include "src/simix/smx_private.hpp" /* MSG_task_listen looks inside the rdv directly. Not clean. */
-/** \ingroup msg_task_usage
- * \brief Executes a task and waits for its termination.
+XBT_LOG_NEW_DEFAULT_SUBCATEGORY(msg_gos, msg, "Logging specific to MSG (gos)");
+
+/**
+ * @brief Executes a task and waits for its termination.
*
* This function is used for describing the behavior of a process. It takes only one parameter.
- * \param task a #msg_task_t to execute on the location on which the process is running.
- * \return #MSG_OK if the task was successfully completed, #MSG_TASK_CANCELED or #MSG_HOST_FAILURE otherwise
+ * @param task a #msg_task_t to execute on the location on which the process is running.
+ * @return #MSG_OK if the task was successfully completed, #MSG_TASK_CANCELED or #MSG_HOST_FAILURE otherwise
*/
msg_error_t MSG_task_execute(msg_task_t task)
{
- /* TODO: add this to other locations */
- msg_host_t host = MSG_process_get_host(MSG_process_self());
- MSG_host_add_task(host, task);
-
- msg_error_t ret = MSG_parallel_task_execute(task);
-
- MSG_host_del_task(host, task);
-
- return ret;
+ return MSG_parallel_task_execute(task);
}
-/** \ingroup msg_task_usage
- * \brief Executes a parallel task and waits for its termination.
+/**
+ * @brief Executes a parallel task and waits for its termination.
*
- * \param task a #msg_task_t to execute on the location on which the process is running.
+ * @param task a #msg_task_t to execute on the location on which the process is running.
*
- * \return #MSG_OK if the task was successfully completed, #MSG_TASK_CANCELED
+ * @return #MSG_OK if the task was successfully completed, #MSG_TASK_CANCELED
* or #MSG_HOST_FAILURE otherwise
*/
msg_error_t MSG_parallel_task_execute(msg_task_t task)
{
- xbt_ex_t e;
+ return MSG_parallel_task_execute_with_timeout(task, -1);
+}
+
+msg_error_t MSG_parallel_task_execute_with_timeout(msg_task_t task, double timeout)
+{
simdata_task_t simdata = task->simdata;
- simdata_process_t p_simdata = (simdata_process_t) SIMIX_process_self_get_data();
e_smx_state_t comp_state;
msg_error_t status = MSG_OK;
- TRACE_msg_task_execute_start(task);
- xbt_assert((!simdata->compute) && (task->simdata->isused == 0),
- "This task is executed somewhere else. Go fix your code! %d", task->simdata->isused!=NULL);
+ xbt_assert((not simdata->compute) && not task->simdata->isused,
+ "This task is executed somewhere else. Go fix your code!");
XBT_DEBUG("Computing on %s", MSG_process_get_name(MSG_process_self()));
- if (simdata->flops_amount == 0 && !simdata->host_nb) {
- TRACE_msg_task_execute_end(task);
+ if (simdata->flops_amount <= 0.0 && not simdata->host_nb) {
return MSG_OK;
}
- TRY {
- if (msg_global->debug_multiple_use)
- MSG_BT(simdata->isused, "Using Backtrace");
- else
- simdata->isused = (void*)1;
+ if (TRACE_actor_is_enabled())
+ simgrid::instr::Container::by_name(instr_pid(MSG_process_self()))->get_state("ACTOR_STATE")->push_event("execute");
+
+ try {
+ simdata->setUsed();
if (simdata->host_nb > 0) {
- simdata->compute = simcall_execution_parallel_start(task->name, simdata->host_nb,simdata->host_list,
- simdata->flops_parallel_amount, simdata->bytes_parallel_amount,
- 1.0, -1.0);
- XBT_DEBUG("Parallel execution action created: %p", simdata->compute);
+ simdata->compute =
+ boost::static_pointer_cast<simgrid::kernel::activity::ExecImpl>(simcall_execution_parallel_start(
+ task->name ?: "", simdata->host_nb, simdata->host_list, simdata->flops_parallel_amount,
+ simdata->bytes_parallel_amount, -1.0, timeout));
+ XBT_DEBUG("Parallel execution action created: %p", simdata->compute.get());
+ if (task->category != nullptr)
+ simgrid::simix::simcall([task] { task->simdata->compute->set_category(task->category); });
} else {
- unsigned long affinity_mask =
- (unsigned long)(uintptr_t) xbt_dict_get_or_null_ext(simdata->affinity_mask_db, (char *) p_simdata->m_host,
- sizeof(msg_host_t));
- XBT_DEBUG("execute %s@%s with affinity(0x%04lx)",
- MSG_task_get_name(task), MSG_host_get_name(p_simdata->m_host), affinity_mask);
-
- simdata->compute = simcall_execution_start(task->name, simdata->flops_amount, simdata->priority,
- simdata->bound, affinity_mask);
+ sg_host_t host = MSG_process_get_host(MSG_process_self());
+ simdata->compute = simgrid::simix::simcall([task, host] {
+ return simgrid::kernel::activity::ExecImplPtr(
+ new simgrid::kernel::activity::ExecImpl(task->name ?: "", task->category ?: "",
+ /*timeout_detector*/ nullptr, host));
+ });
+ /* checking for infinite values */
+ xbt_assert(std::isfinite(simdata->flops_amount), "flops_amount is not finite!");
+ xbt_assert(std::isfinite(simdata->priority), "priority is not finite!");
+
+ simdata->compute->start(simdata->flops_amount, simdata->priority, simdata->bound);
}
- simcall_set_category(simdata->compute, task->category);
- p_simdata->waiting_action = simdata->compute;
- comp_state = simcall_execution_wait(simdata->compute);
- p_simdata->waiting_action = NULL;
+ comp_state = simcall_execution_wait(simdata->compute);
- if (msg_global->debug_multiple_use && simdata->isused!=0)
- xbt_ex_free(*(xbt_ex_t*)simdata->isused);
- simdata->isused = 0;
+ simdata->setNotUsed();
XBT_DEBUG("Execution task '%s' finished in state %d", task->name, (int)comp_state);
+ } catch (simgrid::HostFailureException& e) {
+ status = MSG_HOST_FAILURE;
+ } catch (simgrid::TimeoutError& e) {
+ status = MSG_TIMEOUT;
+ } catch (simgrid::CancelException& e) {
+ status = MSG_TASK_CANCELED;
}
- CATCH(e) {
- switch (e.category) {
- case cancel_error:
- status = MSG_TASK_CANCELED;
- break;
- case host_error:
- status = MSG_HOST_FAILURE;
- break;
- default:
- RETHROW;
- }
- xbt_ex_free(e);
- }
- /* action ended, set comm and compute = NULL, the actions is already destroyed in the main function */
- simdata->flops_amount = 0.0;
- simdata->comm = NULL;
- simdata->compute = NULL;
- TRACE_msg_task_execute_end(task);
-
- MSG_RETURN(status);
-}
-/** \ingroup msg_task_usage
- * \brief Sleep for the specified number of seconds
- *
- * Makes the current process sleep until \a time seconds have elapsed.
- *
- * \param nb_sec a number of second
- */
-msg_error_t MSG_process_sleep(double nb_sec)
-{
- xbt_ex_t e;
- msg_error_t status = MSG_OK;
- /*msg_process_t proc = MSG_process_self();*/
-
- TRACE_msg_process_sleep_in(MSG_process_self());
+ /* action ended, set comm and compute = nullptr, the actions is already destroyed in the main function */
+ simdata->flops_amount = 0.0;
+ simdata->comm = nullptr;
+ simdata->compute = nullptr;
- TRY {
- simcall_process_sleep(nb_sec);
- }
- CATCH(e) {
- switch (e.category) {
- case cancel_error:
- XBT_DEBUG("According to the JAVA API, a sleep call should only deal with HostFailureException, WTF here ?");
- // adsein: MSG_TASK_CANCELED is assigned when someone kills the process that made the sleep, this is not
- // correct. For instance, when the node is turned off, the error should be MSG_HOST_FAILURE, which is by the way
- // and according to the JAVA document, the only exception that can be triggered by MSG_Process_sleep call.
- // To avoid possible impacts in the code, I just raised a host_failure exception for the moment in the JAVA code
- // and did not change anythings at the C level.
- // See comment in the jmsg_process.c file, function JNIEXPORT void JNICALL Java_org_simgrid_msg_Process_sleep(JNIEnv *env, jclass cls, jlong jmillis, jint jnanos)
- status = MSG_TASK_CANCELED;
- break;
- default:
- RETHROW;
- }
- xbt_ex_free(e);
- }
+ if (TRACE_actor_is_enabled())
+ simgrid::instr::Container::by_name(instr_pid(MSG_process_self()))->get_state("ACTOR_STATE")->pop_event();
- TRACE_msg_process_sleep_out(MSG_process_self());
- MSG_RETURN(status);
+ return status;
}
-/** \ingroup msg_task_usage
- * \brief Receives a task from a mailbox.
+/**
+ * @brief Receives a task from a mailbox.
*
* This is a blocking function, the execution flow will be blocked until the task is received. See #MSG_task_irecv
* for receiving tasks asynchronously.
*
- * \param task a memory location for storing a #msg_task_t.
- * \param alias name of the mailbox to receive the task from
+ * @param task a memory location for storing a #msg_task_t.
+ * @param alias name of the mailbox to receive the task from
*
- * \return Returns
+ * @return Returns
* #MSG_OK if the task was successfully received,
* #MSG_HOST_FAILURE, or #MSG_TRANSFER_FAILURE otherwise.
*/
return MSG_task_receive_with_timeout(task, alias, -1);
}
-/** \ingroup msg_task_usage
- * \brief Receives a task from a mailbox at a given rate.
+/**
+ * @brief Receives a task from a mailbox at a given rate.
*
- * \param task a memory location for storing a #msg_task_t.
- * \param alias name of the mailbox to receive the task from
- * \param rate limit the reception to rate bandwidth
+ * @param task a memory location for storing a #msg_task_t.
+ * @param alias name of the mailbox to receive the task from
+ * @param rate limit the reception to rate bandwidth (byte/sec)
*
- * \return Returns
+ * The rate parameter can be used to receive a task with a limited
+ * bandwidth (smaller than the physical available value). Use
+ * MSG_task_receive() if you don't limit the rate (or pass -1 as a
+ * rate value do disable this feature).
+ *
+ * @return Returns
* #MSG_OK if the task was successfully received,
* #MSG_HOST_FAILURE, or #MSG_TRANSFER_FAILURE otherwise.
*/
return MSG_task_receive_with_timeout_bounded(task, alias, -1, rate);
}
-/** \ingroup msg_task_usage
- * \brief Receives a task from a mailbox with a given timeout.
+/**
+ * @brief Receives a task from a mailbox with a given timeout.
*
* This is a blocking function with a timeout, the execution flow will be blocked until the task is received or the
* timeout is achieved. See #MSG_task_irecv for receiving tasks asynchronously. You can provide a -1 timeout
* to obtain an infinite timeout.
*
- * \param task a memory location for storing a #msg_task_t.
- * \param alias name of the mailbox to receive the task from
- * \param timeout is the maximum wait time for completion (if -1, this call is the same as #MSG_task_receive)
+ * @param task a memory location for storing a #msg_task_t.
+ * @param alias name of the mailbox to receive the task from
+ * @param timeout is the maximum wait time for completion (if -1, this call is the same as #MSG_task_receive)
*
- * \return Returns
+ * @return Returns
* #MSG_OK if the task was successfully received,
* #MSG_HOST_FAILURE, or #MSG_TRANSFER_FAILURE, or #MSG_TIMEOUT otherwise.
*/
msg_error_t MSG_task_receive_with_timeout(msg_task_t * task, const char *alias, double timeout)
{
- return MSG_task_receive_ext(task, alias, timeout, NULL);
+ return MSG_task_receive_ext(task, alias, timeout, nullptr);
}
-/** \ingroup msg_task_usage
- * \brief Receives a task from a mailbox with a given timeout and at a given rate.
+/**
+ * @brief Receives a task from a mailbox with a given timeout and at a given rate.
+ *
+ * @param task a memory location for storing a #msg_task_t.
+ * @param alias name of the mailbox to receive the task from
+ * @param timeout is the maximum wait time for completion (if -1, this call is the same as #MSG_task_receive)
+ * @param rate limit the reception to rate bandwidth (byte/sec)
*
- * \param task a memory location for storing a #msg_task_t.
- * \param alias name of the mailbox to receive the task from
- * \param timeout is the maximum wait time for completion (if -1, this call is the same as #MSG_task_receive)
- * \param rate limit the reception to rate bandwidth
+ * The rate parameter can be used to send a task with a limited
+ * bandwidth (smaller than the physical available value). Use
+ * MSG_task_receive() if you don't limit the rate (or pass -1 as a
+ * rate value do disable this feature).
*
- * \return Returns
+ * @return Returns
* #MSG_OK if the task was successfully received,
* #MSG_HOST_FAILURE, or #MSG_TRANSFER_FAILURE, or #MSG_TIMEOUT otherwise.
*/
msg_error_t MSG_task_receive_with_timeout_bounded(msg_task_t * task, const char *alias, double timeout,double rate)
{
- return MSG_task_receive_ext_bounded(task, alias, timeout, NULL, rate);
+ return MSG_task_receive_ext_bounded(task, alias, timeout, nullptr, rate);
}
-/** \ingroup msg_task_usage
- * \brief Receives a task from a mailbox from a specific host with a given timeout.
+/**
+ * @brief Receives a task from a mailbox from a specific host with a given timeout.
*
* This is a blocking function with a timeout, the execution flow will be blocked until the task is received or the
* timeout is achieved. See #MSG_task_irecv for receiving tasks asynchronously. You can provide a -1 timeout
* to obtain an infinite timeout.
*
- * \param task a memory location for storing a #msg_task_t.
- * \param alias name of the mailbox to receive the task from
- * \param timeout is the maximum wait time for completion (provide -1 for no timeout)
- * \param host a #msg_host_t host from where the task was sent
+ * @param task a memory location for storing a #msg_task_t.
+ * @param alias name of the mailbox to receive the task from
+ * @param timeout is the maximum wait time for completion (provide -1 for no timeout)
+ * @param host a #msg_host_t host from where the task was sent
*
- * \return Returns
+ * @return Returns
* #MSG_OK if the task was successfully received,
-* #MSG_HOST_FAILURE, or #MSG_TRANSFER_FAILURE, or #MSG_TIMEOUT otherwise.
+ * #MSG_HOST_FAILURE, or #MSG_TRANSFER_FAILURE, or #MSG_TIMEOUT otherwise.
*/
msg_error_t MSG_task_receive_ext(msg_task_t * task, const char *alias, double timeout, msg_host_t host)
{
- xbt_ex_t e;
- msg_error_t ret = MSG_OK;
XBT_DEBUG("MSG_task_receive_ext: Trying to receive a message on mailbox '%s'", alias);
- TRY {
- ret = MSG_mailbox_get_task_ext(MSG_mailbox_get_by_alias(alias), task, host, timeout);
- }
- CATCH(e) {
- switch (e.category) {
- case cancel_error: /* may be thrown by MSG_mailbox_get_by_alias */
- ret = MSG_HOST_FAILURE;
- break;
- default:
- RETHROW;
- }
- xbt_ex_free(e);
- }
- return ret;
+ return MSG_task_receive_ext_bounded(task, alias, timeout, host, -1.0);
}
-/** \ingroup msg_task_usage
- * \brief Receives a task from a mailbox from a specific host with a given timeout and at a given rate.
+/**
+ * @brief Receives a task from a mailbox from a specific host with a given timeout and at a given rate.
+ *
+ * @param task a memory location for storing a #msg_task_t.
+ * @param alias name of the mailbox to receive the task from
+ * @param timeout is the maximum wait time for completion (provide -1 for no timeout)
+ * @param host a #msg_host_t host from where the task was sent
+ * @param rate limit the reception to rate bandwidth (byte/sec)
*
- * \param task a memory location for storing a #msg_task_t.
- * \param alias name of the mailbox to receive the task from
- * \param timeout is the maximum wait time for completion (provide -1 for no timeout)
- * \param host a #msg_host_t host from where the task was sent
- * \param rate limit the reception to rate bandwidth
+ * The rate parameter can be used to receive a task with a limited
+ * bandwidth (smaller than the physical available value). Use
+ * MSG_task_receive_ext() if you don't limit the rate (or pass -1 as a
+ * rate value do disable this feature).
*
- * \return Returns
+ * @return Returns
* #MSG_OK if the task was successfully received,
-* #MSG_HOST_FAILURE, or #MSG_TRANSFER_FAILURE, or #MSG_TIMEOUT otherwise.
+ * #MSG_HOST_FAILURE, or #MSG_TRANSFER_FAILURE, or #MSG_TIMEOUT otherwise.
*/
msg_error_t MSG_task_receive_ext_bounded(msg_task_t * task, const char *alias, double timeout, msg_host_t host,
double rate)
{
XBT_DEBUG("MSG_task_receive_ext: Trying to receive a message on mailbox '%s'", alias);
- return MSG_mailbox_get_task_ext_bounded(MSG_mailbox_get_by_alias(alias), task, host, timeout, rate);
+ msg_error_t ret = MSG_OK;
+ /* We no longer support getting a task from a specific host */
+ if (host)
+ THROW_UNIMPLEMENTED;
+
+ /* Sanity check */
+ xbt_assert(task, "Null pointer for the task storage");
+
+ if (*task)
+ XBT_WARN("Asked to write the received task in a non empty struct -- proceeding.");
+
+ /* Try to receive it by calling SIMIX network layer */
+ try {
+ void* payload;
+ simgrid::s4u::Mailbox::by_name(alias)
+ ->get_init()
+ ->set_dst_data(&payload, sizeof(msg_task_t*))
+ ->set_rate(rate)
+ ->wait_for(timeout);
+ *task = static_cast<msg_task_t>(payload);
+ XBT_DEBUG("Got task %s from %s", (*task)->name, alias);
+ (*task)->simdata->setNotUsed();
+ } catch (simgrid::HostFailureException& e) {
+ ret = MSG_HOST_FAILURE;
+ } catch (simgrid::TimeoutError& e) {
+ ret = MSG_TIMEOUT;
+ } catch (simgrid::CancelException& e) {
+ ret = MSG_HOST_FAILURE;
+ } catch (xbt_ex& e) {
+ if (e.category == network_error)
+ ret = MSG_TRANSFER_FAILURE;
+ else
+ throw;
+ }
+
+ if (ret != MSG_HOST_FAILURE && ret != MSG_TRANSFER_FAILURE && ret != MSG_TIMEOUT) {
+ TRACE_msg_task_get_end(*task);
+ }
+ return ret;
}
-/* Internal function used to factorize code between MSG_task_isend_with_matching() and MSG_task_dsend(). */
-static XBT_INLINE msg_comm_t MSG_task_isend_internal(msg_task_t task, const char *alias,
- int (*match_fun)(void*,void*, smx_synchro_t),
- void *match_data, void_f_pvoid_t cleanup, int detached)
+/* Internal function used to factorize code between MSG_task_isend(), MSG_task_isend_bounded(), and MSG_task_dsend(). */
+static inline msg_comm_t MSG_task_isend_internal(msg_task_t task, const char* alias,
+ void_f_pvoid_t cleanup, int detached)
{
- simdata_task_t t_simdata = NULL;
- msg_process_t process = MSG_process_self();
- msg_mailbox_t mailbox = MSG_mailbox_get_by_alias(alias);
- int call_end = TRACE_msg_task_put_start(task);
+ simdata_task_t t_simdata = nullptr;
+ msg_process_t myself = MSG_process_self();
+ simgrid::s4u::MailboxPtr mailbox = simgrid::s4u::Mailbox::by_name(alias);
+ TRACE_msg_task_put_start(task);
/* Prepare the task to send */
t_simdata = task->simdata;
- t_simdata->sender = process;
- t_simdata->source = ((simdata_process_t) SIMIX_process_self_get_data())->m_host;
-
- if (t_simdata->isused != 0) {
- if (msg_global->debug_multiple_use){
- XBT_ERROR("This task is already used in there:");
- xbt_backtrace_display((xbt_ex_t*) t_simdata->isused);
- XBT_ERROR("And you try to reuse it from here:");
- xbt_backtrace_display_current();
- } else {
- xbt_assert(t_simdata->isused == 0,
- "This task is still being used somewhere else. You cannot send it now. Go fix your code!"
- "(use --cfg=msg/debug_multiple_use:on to get the backtrace of the other process)");
- }
- }
-
- if (msg_global->debug_multiple_use)
- MSG_BT(t_simdata->isused, "Using Backtrace");
- else
- t_simdata->isused = (void*)1;
- t_simdata->comm = NULL;
+ t_simdata->sender = myself;
+ t_simdata->source = MSG_host_self();
+ t_simdata->setUsed();
+ t_simdata->comm = nullptr;
msg_global->sent_msg++;
/* Send it by calling SIMIX network layer */
- smx_synchro_t act = simcall_comm_isend(SIMIX_process_self(), mailbox, t_simdata->bytes_amount, t_simdata->rate,
- task, sizeof(void *), match_fun, cleanup, NULL, match_data,detached);
- t_simdata->comm = act; /* FIXME: is the field t_simdata->comm still useful? */
-
- msg_comm_t comm;
- if (detached) {
- comm = NULL;
- } else {
- comm = xbt_new0(s_msg_comm_t, 1);
- comm->task_sent = task;
- comm->task_received = NULL;
- comm->status = MSG_OK;
- comm->s_comm = act;
+ smx_activity_t act =
+ simcall_comm_isend(myself->get_impl(), mailbox->get_impl(), t_simdata->bytes_amount, t_simdata->rate, task,
+ sizeof(void*), nullptr, cleanup, nullptr, nullptr, detached);
+ t_simdata->comm = boost::static_pointer_cast<simgrid::kernel::activity::CommImpl>(act);
+
+ msg_comm_t comm = nullptr;
+ if (not detached) {
+ comm = new simgrid::msg::Comm(task, nullptr, act);
}
- if (TRACE_is_enabled())
- simcall_set_category(act, task->category);
- if (call_end)
- TRACE_msg_task_put_end();
+ if (TRACE_is_enabled() && task->category != nullptr)
+ simgrid::simix::simcall([act, task] { act->set_category(task->category); });
+
+ TRACE_msg_task_put_end();
return comm;
}
-/** \ingroup msg_task_usage
- * \brief Sends a task on a mailbox.
+/**
+ * @brief Sends a task on a mailbox.
*
* This is a non blocking function: use MSG_comm_wait() or MSG_comm_test() to end the communication.
*
- * \param task a #msg_task_t to send on another location.
- * \param alias name of the mailbox to sent the task to
- * \return the msg_comm_t communication created
+ * @param task a #msg_task_t to send on another location.
+ * @param alias name of the mailbox to sent the task to
+ * @return the msg_comm_t communication created
*/
msg_comm_t MSG_task_isend(msg_task_t task, const char *alias)
{
- return MSG_task_isend_internal(task, alias, NULL, NULL, NULL, 0);
+ return MSG_task_isend_internal(task, alias, nullptr, 0);
}
-/** \ingroup msg_task_usage
- * \brief Sends a task on a mailbox with a maximum rate
+/**
+ * @brief Sends a task on a mailbox with a maximum rate
*
* This is a non blocking function: use MSG_comm_wait() or MSG_comm_test() to end the communication. The maxrate
* parameter allows the application to limit the bandwidth utilization of network links when sending the task.
*
- * \param task a #msg_task_t to send on another location.
- * \param alias name of the mailbox to sent the task to
- * \param maxrate the maximum communication rate for sending this task .
- * \return the msg_comm_t communication created
+ * @param task a #msg_task_t to send on another location.
+ * @param alias name of the mailbox to sent the task to
+ * @param maxrate the maximum communication rate for sending this task (byte/sec).
+ * @return the msg_comm_t communication created
*/
msg_comm_t MSG_task_isend_bounded(msg_task_t task, const char *alias, double maxrate)
{
task->simdata->rate = maxrate;
- return MSG_task_isend_internal(task, alias, NULL, NULL, NULL, 0);
-}
-
-/** \ingroup msg_task_usage
- * \brief Sends a task on a mailbox, with support for matching requests
- *
- * This is a non blocking function: use MSG_comm_wait() or MSG_comm_test() to end the communication.
- *
- * \param task a #msg_task_t to send on another location.
- * \param alias name of the mailbox to sent the task to
- * \param match_fun boolean function which parameters are:
- * - match_data_provided_here
- * - match_data_provided_by_other_side_if_any
- * - the_smx_synchro_describing_the_other_side
- * \param match_data user provided data passed to match_fun
- * \return the msg_comm_t communication created
- */
-msg_comm_t MSG_task_isend_with_matching(msg_task_t task, const char *alias,
- int (*match_fun)(void*, void*, smx_synchro_t), void *match_data)
-{
- return MSG_task_isend_internal(task, alias, match_fun, match_data, NULL, 0);
+ return MSG_task_isend_internal(task, alias, nullptr, 0);
}
-/** \ingroup msg_task_usage
- * \brief Sends a task on a mailbox.
+/**
+ * @brief Sends a task on a mailbox.
*
* This is a non blocking detached send function.
* Think of it as a best effort send. Keep in mind that the third parameter is only called if the communication fails.
* <a href="http://lists.gforge.inria.fr/pipermail/simgrid-user/2011-November/002649.html">this thread</a>
* in the SimGrid-user mailing list archive.
*
- * \param task a #msg_task_t to send on another location.
- * \param alias name of the mailbox to sent the task to
- * \param cleanup a function to destroy the task if the communication fails, e.g. MSG_task_destroy
- * (if NULL, no function will be called)
+ * @param task a #msg_task_t to send on another location.
+ * @param alias name of the mailbox to sent the task to
+ * @param cleanup a function to destroy the task if the communication fails, e.g. MSG_task_destroy
+ * (if nullptr, no function will be called)
*/
void MSG_task_dsend(msg_task_t task, const char *alias, void_f_pvoid_t cleanup)
{
- MSG_task_isend_internal(task, alias, NULL, NULL, cleanup, 1);
+ msg_comm_t XBT_ATTRIB_UNUSED comm = MSG_task_isend_internal(task, alias, cleanup, 1);
+ xbt_assert(comm == nullptr);
}
-/** \ingroup msg_task_usage
- * \brief Sends a task on a mailbox with a maximal rate.
+/**
+ * @brief Sends a task on a mailbox with a maximal rate.
*
* This is a non blocking detached send function.
* Think of it as a best effort send. Keep in mind that the third parameter is only called if the communication fails.
* <a href="http://lists.gforge.inria.fr/pipermail/simgrid-user/2011-November/002649.html">this thread</a>
* in the SimGrid-user mailing list archive.
*
- * \param task a #msg_task_t to send on another location.
- * \param alias name of the mailbox to sent the task to
- * \param cleanup a function to destroy the task if the
+ * The rate parameter can be used to send a task with a limited
+ * bandwidth (smaller than the physical available value). Use
+ * MSG_task_dsend() if you don't limit the rate (or pass -1 as a rate
+ * value do disable this feature).
+ *
+ * @param task a #msg_task_t to send on another location.
+ * @param alias name of the mailbox to sent the task to
+ * @param cleanup a function to destroy the task if the
* communication fails, e.g. MSG_task_destroy
- * (if NULL, no function will be called)
- * \param maxrate the maximum communication rate for sending this task
+ * (if nullptr, no function will be called)
+ * @param maxrate the maximum communication rate for sending this task (byte/sec)
*
*/
void MSG_task_dsend_bounded(msg_task_t task, const char *alias, void_f_pvoid_t cleanup, double maxrate)
MSG_task_dsend(task, alias, cleanup);
}
-/** \ingroup msg_task_usage
- * \brief Starts listening for receiving a task from an asynchronous communication.
+/**
+ * @brief Starts listening for receiving a task from an asynchronous communication.
*
* This is a non blocking function: use MSG_comm_wait() or MSG_comm_test() to end the communication.
*
- * \param task a memory location for storing a #msg_task_t. has to be valid until the end of the communication.
- * \param name of the mailbox to receive the task on
- * \return the msg_comm_t communication created
+ * @param task a memory location for storing a #msg_task_t. has to be valid until the end of the communication.
+ * @param name of the mailbox to receive the task on
+ * @return the msg_comm_t communication created
*/
msg_comm_t MSG_task_irecv(msg_task_t *task, const char *name)
{
return MSG_task_irecv_bounded(task, name, -1.0);
}
-/** \ingroup msg_task_usage
- * \brief Starts listening for receiving a task from an asynchronous communication at a given rate.
+/**
+ * @brief Starts listening for receiving a task from an asynchronous communication at a given rate.
*
- * \param task a memory location for storing a #msg_task_t. has to be valid until the end of the communication.
- * \param name of the mailbox to receive the task on
- * \param rate limit the bandwidth to the given rate
- * \return the msg_comm_t communication created
+ * The rate parameter can be used to receive a task with a limited
+ * bandwidth (smaller than the physical available value). Use
+ * MSG_task_irecv() if you don't limit the rate (or pass -1 as a rate
+ * value do disable this feature).
+ *
+ * @param task a memory location for storing a #msg_task_t. has to be valid until the end of the communication.
+ * @param name of the mailbox to receive the task on
+ * @param rate limit the bandwidth to the given rate (byte/sec)
+ * @return the msg_comm_t communication created
*/
msg_comm_t MSG_task_irecv_bounded(msg_task_t *task, const char *name, double rate)
{
- smx_rdv_t rdv = MSG_mailbox_get_by_alias(name);
+ simgrid::s4u::MailboxPtr mbox = simgrid::s4u::Mailbox::by_name(name);
/* FIXME: these functions are not traceable */
/* Sanity check */
XBT_CRITICAL("MSG_task_irecv() was asked to write in a non empty task struct.");
/* Try to receive it by calling SIMIX network layer */
- msg_comm_t comm = xbt_new0(s_msg_comm_t, 1);
- comm->task_sent = NULL;
- comm->task_received = task;
- comm->status = MSG_OK;
- comm->s_comm = simcall_comm_irecv(MSG_process_self(), rdv, task, NULL, NULL, NULL, NULL, rate);
+ msg_comm_t comm = new simgrid::msg::Comm(
+ nullptr, task,
+ simcall_comm_irecv(SIMIX_process_self(), mbox->get_impl(), task, nullptr, nullptr, nullptr, nullptr, rate));
return comm;
}
-/** \ingroup msg_task_usage
- * \brief Checks whether a communication is done, and if yes, finalizes it.
- * \param comm the communication to test
- * \return TRUE if the communication is finished
+/**
+ * @brief Checks whether a communication is done, and if yes, finalizes it.
+ * @param comm the communication to test
+ * @return 'true' if the communication is finished
* (but it may have failed, use MSG_comm_get_status() to know its status)
- * or FALSE if the communication is not finished yet
- * If the status is FALSE, don't forget to use MSG_process_sleep() after the test.
+ * or 'false' if the communication is not finished yet
+ * If the status is 'false', don't forget to use MSG_process_sleep() after the test.
*/
int MSG_comm_test(msg_comm_t comm)
{
- xbt_ex_t e;
- int finished = 0;
+ bool finished = false;
- TRY {
+ try {
finished = simcall_comm_test(comm->s_comm);
-
- if (finished && comm->task_received != NULL) {
+ if (finished && comm->task_received != nullptr) {
/* I am the receiver */
- if (msg_global->debug_multiple_use && (*comm->task_received)->simdata->isused!=0)
- xbt_ex_free(*(xbt_ex_t*)(*comm->task_received)->simdata->isused);
- (*comm->task_received)->simdata->isused = 0;
+ (*comm->task_received)->simdata->setNotUsed();
}
+ } catch (simgrid::TimeoutError& e) {
+ comm->status = MSG_TIMEOUT;
+ finished = true;
}
- CATCH(e) {
- switch (e.category) {
- case network_error:
- comm->status = MSG_TRANSFER_FAILURE;
- finished = 1;
- break;
- case timeout_error:
- comm->status = MSG_TIMEOUT;
- finished = 1;
- break;
- default:
- RETHROW;
+ catch (xbt_ex& e) {
+ if (e.category == network_error) {
+ comm->status = MSG_TRANSFER_FAILURE;
+ finished = true;
+ } else {
+ throw;
}
- xbt_ex_free(e);
}
return finished;
}
-/** \ingroup msg_task_usage
- * \brief This function checks if a communication is finished.
- * \param comms a vector of communications
- * \return the position of the finished communication if any
+/**
+ * @brief This function checks if a communication is finished.
+ * @param comms a vector of communications
+ * @return the position of the finished communication if any
* (but it may have failed, use MSG_comm_get_status() to know its status),
* or -1 if none is finished
*/
int MSG_comm_testany(xbt_dynar_t comms)
{
- xbt_ex_t e;
int finished_index = -1;
- /* create the equivalent dynar with SIMIX objects */
- xbt_dynar_t s_comms = xbt_dynar_new(sizeof(smx_synchro_t), NULL);
+ /* Create the equivalent array with SIMIX objects: */
+ std::vector<simgrid::kernel::activity::CommImpl*> s_comms;
+ s_comms.reserve(xbt_dynar_length(comms));
msg_comm_t comm;
unsigned int cursor;
xbt_dynar_foreach(comms, cursor, comm) {
- xbt_dynar_push(s_comms, &comm->s_comm);
+ s_comms.push_back(static_cast<simgrid::kernel::activity::CommImpl*>(comm->s_comm.get()));
}
msg_error_t status = MSG_OK;
- TRY {
- finished_index = simcall_comm_testany(s_comms);
+ try {
+ finished_index = simcall_comm_testany(s_comms.data(), s_comms.size());
+ } catch (simgrid::TimeoutError& e) {
+ finished_index = e.value;
+ status = MSG_TIMEOUT;
}
- CATCH(e) {
- switch (e.category) {
- case network_error:
- finished_index = e.value;
- status = MSG_TRANSFER_FAILURE;
- break;
- case timeout_error:
- finished_index = e.value;
- status = MSG_TIMEOUT;
- break;
- default:
- RETHROW;
- }
- xbt_ex_free(e);
+ catch (xbt_ex& e) {
+ if (e.category != network_error)
+ throw;
+ finished_index = e.value;
+ status = MSG_TRANSFER_FAILURE;
}
- xbt_dynar_free(&s_comms);
if (finished_index != -1) {
comm = xbt_dynar_get_as(comms, finished_index, msg_comm_t);
/* the communication is finished */
comm->status = status;
- if (status == MSG_OK && comm->task_received != NULL) {
+ if (status == MSG_OK && comm->task_received != nullptr) {
/* I am the receiver */
- if (msg_global->debug_multiple_use && (*comm->task_received)->simdata->isused!=0)
- xbt_ex_free(*(xbt_ex_t*)(*comm->task_received)->simdata->isused);
- (*comm->task_received)->simdata->isused = 0;
+ (*comm->task_received)->simdata->setNotUsed();
}
}
return finished_index;
}
-/** \ingroup msg_task_usage
- * \brief Destroys a communication.
- * \param comm the communication to destroy.
- */
+/** @brief Destroys the provided communication. */
void MSG_comm_destroy(msg_comm_t comm)
{
- xbt_free(comm);
+ delete comm;
}
-/** \ingroup msg_task_usage
- * \brief Wait for the completion of a communication.
+/** @brief Wait for the completion of a communication.
*
* It takes two parameters.
- * \param comm the communication to wait.
- * \param timeout Wait until the communication terminates or the timeout occurs.
+ * @param comm the communication to wait.
+ * @param timeout Wait until the communication terminates or the timeout occurs.
* You can provide a -1 timeout to obtain an infinite timeout.
- * \return msg_error_t
+ * @return msg_error_t
*/
msg_error_t MSG_comm_wait(msg_comm_t comm, double timeout)
{
- xbt_ex_t e;
- TRY {
+ try {
simcall_comm_wait(comm->s_comm, timeout);
- if (comm->task_received != NULL) {
+ if (comm->task_received != nullptr) {
/* I am the receiver */
- if (msg_global->debug_multiple_use && (*comm->task_received)->simdata->isused!=0)
- xbt_ex_free(*(xbt_ex_t*)(*comm->task_received)->simdata->isused);
- (*comm->task_received)->simdata->isused = 0;
+ (*comm->task_received)->simdata->setNotUsed();
}
/* FIXME: these functions are not traceable */
+ } catch (simgrid::TimeoutError& e) {
+ comm->status = MSG_TIMEOUT;
}
- CATCH(e) {
- switch (e.category) {
- case network_error:
+ catch (xbt_ex& e) {
+ if (e.category == network_error)
comm->status = MSG_TRANSFER_FAILURE;
- break;
- case timeout_error:
- comm->status = MSG_TIMEOUT;
- break;
- default:
- RETHROW;
- }
- xbt_ex_free(e);
+ else
+ throw;
}
return comm->status;
}
-/** \ingroup msg_task_usage
-* \brief This function is called by a sender and permit to wait for each communication
-*
-* \param comm a vector of communication
-* \param nb_elem is the size of the comm vector
-* \param timeout for each call of MSG_comm_wait
-*/
+/** @brief This function is called by a sender and permit to wait for each communication
+ *
+ * @param comm a vector of communication
+ * @param nb_elem is the size of the comm vector
+ * @param timeout for each call of MSG_comm_wait
+ */
void MSG_comm_waitall(msg_comm_t * comm, int nb_elem, double timeout)
{
- int i = 0;
- for (i = 0; i < nb_elem; i++) {
+ for (int i = 0; i < nb_elem; i++)
MSG_comm_wait(comm[i], timeout);
- }
}
-/** \ingroup msg_task_usage
- * \brief This function waits for the first communication finished in a list.
- * \param comms a vector of communications
- * \return the position of the first finished communication
+/** @brief This function waits for the first communication finished in a list.
+ * @param comms a vector of communications
+ * @return the position of the first finished communication
* (but it may have failed, use MSG_comm_get_status() to know its status)
*/
int MSG_comm_waitany(xbt_dynar_t comms)
{
- xbt_ex_t e;
int finished_index = -1;
- /* create the equivalent dynar with SIMIX objects */
- xbt_dynar_t s_comms = xbt_dynar_new(sizeof(smx_synchro_t), NULL);
+ /* Create the equivalent array with SIMIX objects: */
+ std::vector<simgrid::kernel::activity::CommImpl*> s_comms;
+ s_comms.reserve(xbt_dynar_length(comms));
msg_comm_t comm;
unsigned int cursor;
xbt_dynar_foreach(comms, cursor, comm) {
- xbt_dynar_push(s_comms, &comm->s_comm);
+ s_comms.push_back(static_cast<simgrid::kernel::activity::CommImpl*>(comm->s_comm.get()));
}
msg_error_t status = MSG_OK;
- TRY {
- finished_index = simcall_comm_waitany(s_comms);
+ try {
+ finished_index = simcall_comm_waitany(s_comms.data(), s_comms.size(), -1);
+ } catch (simgrid::TimeoutError& e) {
+ finished_index = e.value;
+ status = MSG_TIMEOUT;
}
- CATCH(e) {
- switch (e.category) {
- case network_error:
- finished_index = e.value;
- status = MSG_TRANSFER_FAILURE;
- break;
- case timeout_error:
- finished_index = e.value;
- status = MSG_TIMEOUT;
- break;
- default:
- RETHROW;
+ catch(xbt_ex& e) {
+ if (e.category == network_error) {
+ finished_index = e.value;
+ status = MSG_TRANSFER_FAILURE;
+ } else {
+ throw;
}
- xbt_ex_free(e);
}
xbt_assert(finished_index != -1, "WaitAny returned -1");
- xbt_dynar_free(&s_comms);
comm = xbt_dynar_get_as(comms, finished_index, msg_comm_t);
/* the communication is finished */
comm->status = status;
- if (comm->task_received != NULL) {
+ if (comm->task_received != nullptr) {
/* I am the receiver */
- if (msg_global->debug_multiple_use && (*comm->task_received)->simdata->isused!=0)
- xbt_ex_free(*(xbt_ex_t*)(*comm->task_received)->simdata->isused);
- (*comm->task_received)->simdata->isused = 0;
+ (*comm->task_received)->simdata->setNotUsed();
}
return finished_index;
}
/**
- * \ingroup msg_task_usage
- * \brief Returns the error (if any) that occured during a finished communication.
- * \param comm a finished communication
- * \return the status of the communication, or #MSG_OK if no error occured
+ * @brief Returns the error (if any) that occurred during a finished communication.
+ * @param comm a finished communication
+ * @return the status of the communication, or #MSG_OK if no error occurred
* during the communication
*/
msg_error_t MSG_comm_get_status(msg_comm_t comm) {
return comm->status;
}
-/** \ingroup msg_task_usage
- * \brief Get a task (#msg_task_t) from a communication
+/** @brief Get a task (#msg_task_t) from a communication
*
- * \param comm the communication where to get the task
- * \return the task from the communication
+ * @param comm the communication where to get the task
+ * @return the task from the communication
*/
msg_task_t MSG_comm_get_task(msg_comm_t comm)
{
}
/**
- * \brief This function is called by SIMIX in kernel mode to copy the data of a comm.
- * \param comm the comm
- * \param buff the data copied
- * \param buff_size size of the buffer
+ * @brief This function is called by SIMIX in kernel mode to copy the data of a comm.
+ * @param comm the comm
+ * @param buff the data copied
+ * @param buff_size size of the buffer
*/
-void MSG_comm_copy_data_from_SIMIX(smx_synchro_t comm, void* buff, size_t buff_size) {
- // copy the task
+void MSG_comm_copy_data_from_SIMIX(simgrid::kernel::activity::CommImpl* comm, void* buff, size_t buff_size)
+{
SIMIX_comm_copy_pointer_callback(comm, buff, buff_size);
// notify the user callback if any
if (msg_global->task_copy_callback) {
- msg_task_t task = (msg_task_t) buff;
- msg_global->task_copy_callback(task, simcall_comm_get_src_proc(comm), simcall_comm_get_dst_proc(comm));
+ msg_task_t task = static_cast<msg_task_t>(buff);
+ msg_global->task_copy_callback(task, comm->src_actor_->ciface(), comm->dst_actor_->ciface());
}
}
-/** \ingroup msg_task_usage
- * \brief Sends a task to a mailbox
+/**
+ * @brief Sends a task to a mailbox
*
* This is a blocking function, the execution flow will be blocked until the task is sent (and received on the other
* side if #MSG_task_receive is used).
* See #MSG_task_isend for sending tasks asynchronously.
*
- * \param task the task to be sent
- * \param alias the mailbox name to where the task is sent
+ * @param task the task to be sent
+ * @param alias the mailbox name to where the task is sent
*
- * \return Returns #MSG_OK if the task was successfully sent,
+ * @return Returns #MSG_OK if the task was successfully sent,
* #MSG_HOST_FAILURE, or #MSG_TRANSFER_FAILURE otherwise.
*/
msg_error_t MSG_task_send(msg_task_t task, const char *alias)
return MSG_task_send_with_timeout(task, alias, -1);
}
-/** \ingroup msg_task_usage
- * \brief Sends a task to a mailbox with a maximum rate
+/**
+ * @brief Sends a task to a mailbox with a maximum rate
*
* This is a blocking function, the execution flow will be blocked until the task is sent. The maxrate parameter allows
* the application to limit the bandwidth utilization of network links when sending the task.
*
- * \param task the task to be sent
- * \param alias the mailbox name to where the task is sent
- * \param maxrate the maximum communication rate for sending this task
+ * The maxrate parameter can be used to send a task with a limited
+ * bandwidth (smaller than the physical available value). Use
+ * MSG_task_send() if you don't limit the rate (or pass -1 as a rate
+ * value do disable this feature).
*
- * \return Returns #MSG_OK if the task was successfully sent,
+ * @param task the task to be sent
+ * @param alias the mailbox name to where the task is sent
+ * @param maxrate the maximum communication rate for sending this task (byte/sec)
+ *
+ * @return Returns #MSG_OK if the task was successfully sent,
* #MSG_HOST_FAILURE, or #MSG_TRANSFER_FAILURE otherwise.
*/
msg_error_t MSG_task_send_bounded(msg_task_t task, const char *alias, double maxrate)
return MSG_task_send(task, alias);
}
-/** \ingroup msg_task_usage
- * \brief Sends a task to a mailbox with a timeout
+/**
+ * @brief Sends a task to a mailbox with a timeout
*
* This is a blocking function, the execution flow will be blocked until the task is sent or the timeout is achieved.
*
- * \param task the task to be sent
- * \param alias the mailbox name to where the task is sent
- * \param timeout is the maximum wait time for completion (if -1, this call is the same as #MSG_task_send)
+ * @param task the task to be sent
+ * @param alias the mailbox name to where the task is sent
+ * @param timeout is the maximum wait time for completion (if -1, this call is the same as #MSG_task_send)
*
- * \return Returns #MSG_OK if the task was successfully sent,
+ * @return Returns #MSG_OK if the task was successfully sent,
* #MSG_HOST_FAILURE, or #MSG_TRANSFER_FAILURE, or #MSG_TIMEOUT otherwise.
*/
msg_error_t MSG_task_send_with_timeout(msg_task_t task, const char *alias, double timeout)
{
- return MSG_mailbox_put_with_timeout(MSG_mailbox_get_by_alias(alias), task, timeout);
+ msg_error_t ret = MSG_OK;
+
+ TRACE_msg_task_put_start(task);
+
+ /* Prepare the task to send */
+ simdata_task_t t_simdata = task->simdata;
+ t_simdata->sender = MSG_process_self();
+ t_simdata->source = MSG_host_self();
+
+ t_simdata->setUsed();
+
+ msg_global->sent_msg++;
+
+ /* Try to send it */
+ try {
+ simgrid::s4u::CommPtr comm =
+ simgrid::s4u::Mailbox::by_name(alias)->put_init(task, t_simdata->bytes_amount)->set_rate(t_simdata->rate);
+ t_simdata->comm = boost::static_pointer_cast<simgrid::kernel::activity::CommImpl>(comm->get_impl());
+ comm->start();
+ if (TRACE_is_enabled() && task->category != nullptr)
+ simgrid::simix::simcall([comm, task] { comm->get_impl()->set_category(task->category); });
+ comm->wait_for(timeout);
+ } catch (simgrid::TimeoutError& e) {
+ ret = MSG_TIMEOUT;
+ } catch (simgrid::CancelException& e) {
+ ret = MSG_HOST_FAILURE;
+ } catch (xbt_ex& e) {
+ if (e.category == network_error)
+ ret = MSG_TRANSFER_FAILURE;
+ else
+ throw;
+
+ /* If the send failed, it is not used anymore */
+ t_simdata->setNotUsed();
+ }
+
+ return ret;
}
-/** \ingroup msg_task_usage
- * \brief Sends a task to a mailbox with a timeout and with a maximum rate
+/**
+ * @brief Sends a task to a mailbox with a timeout and with a maximum rate
*
* This is a blocking function, the execution flow will be blocked until the task is sent or the timeout is achieved.
*
- * \param task the task to be sent
- * \param alias the mailbox name to where the task is sent
- * \param timeout is the maximum wait time for completion (if -1, this call is the same as #MSG_task_send)
- * \param maxrate the maximum communication rate for sending this task
+ * The maxrate parameter can be used to send a task with a limited
+ * bandwidth (smaller than the physical available value). Use
+ * MSG_task_send_with_timeout() if you don't limit the rate (or pass -1 as a rate
+ * value do disable this feature).
+ *
+ * @param task the task to be sent
+ * @param alias the mailbox name to where the task is sent
+ * @param timeout is the maximum wait time for completion (if -1, this call is the same as #MSG_task_send)
+ * @param maxrate the maximum communication rate for sending this task (byte/sec)
*
- * \return Returns #MSG_OK if the task was successfully sent,
+ * @return Returns #MSG_OK if the task was successfully sent,
* #MSG_HOST_FAILURE, or #MSG_TRANSFER_FAILURE, or #MSG_TIMEOUT otherwise.
*/
msg_error_t MSG_task_send_with_timeout_bounded(msg_task_t task, const char *alias, double timeout, double maxrate)
{
task->simdata->rate = maxrate;
- return MSG_mailbox_put_with_timeout(MSG_mailbox_get_by_alias(alias), task, timeout);
-}
-
-/** \ingroup msg_task_usage
- * \brief Check if there is a communication going on in a mailbox.
- *
- * \param alias the name of the mailbox to be considered
- *
- * \return Returns 1 if there is a communication, 0 otherwise
- */
-int MSG_task_listen(const char *alias)
-{
- smx_rdv_t rdv = MSG_mailbox_get_by_alias(alias);
- return !MSG_mailbox_is_empty(rdv) || (rdv->permanent_receiver && xbt_fifo_size(rdv->done_comm_fifo)!=0);
-}
-
-/** \ingroup msg_task_usage
- * \brief Check the number of communication actions of a given host pending in a mailbox.
- *
- * \param alias the name of the mailbox to be considered
- * \param host the host to check for communication
- *
- * \return Returns the number of pending communication actions of the host in the given mailbox, 0 if there is no
- * pending communication actions.
- */
-int MSG_task_listen_from_host(const char *alias, msg_host_t host)
-{
- return MSG_mailbox_get_count_host_waiting_tasks(MSG_mailbox_get_by_alias(alias), host);
+ return MSG_task_send_with_timeout(task, alias, timeout);
}
-/** \ingroup msg_task_usage
- * \brief Look if there is a communication on a mailbox and return the PID of the sender process.
+/**
+ * @brief Look if there is a communication on a mailbox and return the PID of the sender process.
*
- * \param alias the name of the mailbox to be considered
+ * @param alias the name of the mailbox to be considered
*
- * \return Returns the PID of sender process,
+ * @return Returns the PID of sender process,
* -1 if there is no communication in the mailbox.
*/
int MSG_task_listen_from(const char *alias)
{
- msg_task_t task;
-
- if (NULL == (task = MSG_mailbox_get_head(MSG_mailbox_get_by_alias(alias))))
- return -1;
+ simgrid::kernel::activity::CommImplPtr comm = simgrid::s4u::Mailbox::by_name(alias)->front();
- return MSG_process_get_PID(task->simdata->sender);
+ return comm ? MSG_process_get_PID(static_cast<msg_task_t>(comm->src_buff_)->simdata->sender) : -1;
}
-/** \ingroup msg_task_usage
- * \brief Sets the tracing category of a task.
+/**
+ * @brief Sets the tracing category of a task.
*
* This function should be called after the creation of a MSG task, to define the category of that task. The
* first parameter task must contain a task that was created with the function #MSG_task_create. The second
* parameter category must contain a category that was previously declared with the function #TRACE_category
* (or with #TRACE_category_with_color).
*
- * See \ref tracing for details on how to trace the (categorized) resource utilization.
+ * See @ref outcomes_vizu for details on how to trace the (categorized) resource utilization.
*
- * \param task the task that is going to be categorized
- * \param category the name of the category to be associated to the task
+ * @param task the task that is going to be categorized
+ * @param category the name of the category to be associated to the task
*
- * \see MSG_task_get_category, TRACE_category, TRACE_category_with_color
+ * @see MSG_task_get_category, TRACE_category, TRACE_category_with_color
*/
void MSG_task_set_category (msg_task_t task, const char *category)
{
TRACE_msg_set_task_category (task, category);
}
-/** \ingroup msg_task_usage
- *
- * \brief Gets the current tracing category of a task.
+/**
+ * @brief Gets the current tracing category of a task.
*
- * \param task the task to be considered
+ * @param task the task to be considered
*
- * \see MSG_task_set_category
+ * @see MSG_task_set_category
*
- * \return Returns the name of the tracing category of the given task, NULL otherwise
+ * @return Returns the name of the tracing category of the given task, nullptr otherwise
*/
const char *MSG_task_get_category (msg_task_t task)
{
return task->category;
}
-
-/**
- * \brief Returns the value of a given AS or router property
- *
- * \param asr the name of a router or AS
- * \param name a property name
- * \return value of a property (or NULL if property not set)
- */
-const char *MSG_as_router_get_property_value(const char* asr, const char *name)
-{
- return (char*) xbt_dict_get_or_null(MSG_as_router_get_properties(asr), name);
-}
-
-/**
- * \brief Returns a xbt_dict_t consisting of the list of properties assigned to
- * a the AS or router
- *
- * \param asr the name of a router or AS
- * \return a dict containing the properties
- */
-xbt_dict_t MSG_as_router_get_properties(const char* asr)
-{
- return (simcall_asr_get_properties(asr));
-}
-
-/**
- * \brief Change the value of a given AS or router
- *
- * \param asr the name of a router or AS
- * \param name a property name
- * \param value what to change the property to
- * \param free_ctn the freeing function to use to kill the value on need
- */
-void MSG_as_router_set_property_value(const char* asr, const char *name, char *value,void_f_pvoid_t free_ctn) {
- xbt_dict_set(MSG_as_router_get_properties(asr), name, value,free_ctn);
-}