Logo AND Algorithmique Numérique Distribuée

Public GIT Repository
use TASK_CANCELED rather than HOST_FAILURE for CancelExeption
[simgrid.git] / CMakeLists.txt
index b16aeab..681c4cf 100644 (file)
@@ -1,4 +1,4 @@
-cmake_minimum_required(VERSION 2.8.8)
+cmake_minimum_required(VERSION 3.5)
 message(STATUS "Cmake version ${CMAKE_MAJOR_VERSION}.${CMAKE_MINOR_VERSION}.${CMAKE_PATCH_VERSION}")
 set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${CMAKE_HOME_DIRECTORY}/tools/cmake/Modules)
 
@@ -15,7 +15,7 @@ endif()
 
 ## 
 ## Check the C/C++ standard that we need
-##   See also tools/cmake/GCCFlags.cmake that sets our paranoid warning flags
+##   See also tools/cmake/Flags.cmake that sets our paranoid warning flags
 INCLUDE(CheckCCompilerFlag)
 CHECK_C_COMPILER_FLAG(-fstack-cleaner HAVE_C_STACK_CLEANER)
 
@@ -32,32 +32,15 @@ if (CMAKE_COMPILER_IS_GNUCC)
   endif()
 endif()
 
-## We need a decent support of the c++11 standard
-include(CheckCXXCompilerFlag)
-CHECK_CXX_COMPILER_FLAG("-std=gnu++11" COMPILER_SUPPORTS_CXX11)
-if(COMPILER_SUPPORTS_CXX11)
-  set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=gnu++11")
-else() 
-  message(FATAL_ERROR 
-          "The compiler ${CMAKE_CXX_COMPILER} (v${CMAKE_CXX_COMPILER_VERSION}) has no C++11 support. "
-          "Please install a decent C++ compiler (remove CMakeCache.txt once it's installed).")
-endif()
+## We need a decent support of the C++11 and C11 standards
+set(CMAKE_CXX_STANDARD 11)
+set(CMAKE_CXX_STANDARD_REQUIRED ON)
 
-### And we need C11 standard, too
-include(CheckCCompilerFlag)
-CHECK_C_COMPILER_FLAG("-std=gnu11" COMPILER_SUPPORTS_C11)
-if(COMPILER_SUPPORTS_C11)
-  set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -std=gnu11")
-else()
-  message(FATAL_ERROR 
-          "The compiler ${CMAKE_C_COMPILER} (v${CMAKE_C_COMPILER_VERSION}) has no C11 support. "
-          "Please use a decent C compiler "
-          "(note that c++11 support of ${CMAKE_CXX_COMPILER} seems ok).")
-endif()
-if(APPLE AND (CMAKE_C_COMPILER_VERSION VERSION_LESS "4.6"))
-  ### gcc 4.[1-5] cannot compile ucontext on OSX
-  message(STATUS "Ucontext can't be used with this version of gcc (must be greater than 4.5)")
-  set(HAVE_UCONTEXT_H 0)
+set(CMAKE_C_STANDARD 11)
+set(CMAKE_C_STANDARD_REQUIRED ON)
+
+if (CMAKE_C_COMPILER_ID STREQUAL "Intel" AND CMAKE_C11_EXTENSION_COMPILE_OPTION STREQUAL "-std=c11")
+  set(CMAKE_C11_EXTENSION_COMPILE_OPTION "-std=gnu11")
 endif()
 
 ### Check threading support
@@ -79,20 +62,23 @@ if ((NOT DEFINED enable_smpi) OR enable_smpi)
   endif()
   
   if(CMAKE_Fortran_COMPILER)
+
     # Fortran compiler detected: save it, then replace by smpiff
     set(SMPI_Fortran_COMPILER "${CMAKE_Fortran_COMPILER}" CACHE FILEPATH "The real Fortran compiler")
-    set(CMAKE_Fortran_COMPILER smpiff)
 
        # Set flags/libs to be used in smpiff
     if(CMAKE_Fortran_COMPILER_ID MATCHES "GNU")
       set(SMPI_Fortran_FLAGS "\"-fpic\" \"-ff2c\" \"-fno-second-underscore\"")
       set(SMPI_Fortran_LIBS "\"-lgfortran\"")
+      set(SMPI_GFORTRAN 1)
     elseif(CMAKE_Fortran_COMPILER_ID MATCHES "Intel")
       set(SMPI_Fortran_FLAGS "\"-fPIC\" \"-nofor-main\"")
       set(SMPI_Fortran_LIBS "\"-lifcore\"")
+      set(SMPI_IFORT 1)
     elseif(CMAKE_Fortran_COMPILER_ID MATCHES "PGI|Flang") # flang
       set(SMPI_Fortran_FLAGS "\"-fPIC\"")
       set(SMPI_Fortran_LIBS "")
+      set(SMPI_FLANG 1)
     endif()
 
     set(SMPI_FORTRAN 1)
@@ -105,11 +91,11 @@ endif()
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
 
 set(SIMGRID_VERSION_MAJOR "3")
-set(SIMGRID_VERSION_MINOR "19")
-set(SIMGRID_VERSION_PATCH "0")
+set(SIMGRID_VERSION_MINOR "21")
+set(SIMGRID_VERSION_PATCH "90")
 set(SIMGRID_VERSION_EXTRA "-DEVEL") # Extra words to add to version string (e.g. -rc1)
 
-set(SIMGRID_VERSION_DATE  "2017") # Year for copyright information
+set(SIMGRID_VERSION_DATE  "2019") # Year for copyright information
 
 if(${SIMGRID_VERSION_PATCH} EQUAL "0")
   set(release_version "${SIMGRID_VERSION_MAJOR}.${SIMGRID_VERSION_MINOR}")
@@ -135,11 +121,6 @@ endif()
 execute_process(COMMAND ${CMAKE_LINKER} -version OUTPUT_VARIABLE LINKER_VERSION ERROR_VARIABLE LINKER_VERSION)
 string(REGEX MATCH "[0-9].[0-9]*" LINKER_VERSION "${LINKER_VERSION}")
 
-### Set the library providing dlopen
-if("${CMAKE_SYSTEM}" MATCHES "Linux")
-  find_library(DL_LIBRARY dl)
-endif("${CMAKE_SYSTEM}" MATCHES "Linux")
-
 ### Find programs and paths
 FIND_PROGRAM(GCOV_PATH gcov)
 include(FindPerl)
@@ -153,26 +134,32 @@ set(PythonInterp_FIND_VERSION_COUNT 1)
 set(PythonInterp_FIND_VERSION_MAJOR 3)
 include(FindPythonInterp)
 if(NOT PYTHONINTERP_FOUND)
-  message(FATAL_ERROR "Please install Python (version 3 or higher).")
+  message(FATAL_ERROR "Please install Python (version 3 or higher) to compile SimGrid.")
 endif()
 
 SET(LIBRARY_OUTPUT_PATH ${CMAKE_BINARY_DIR}/lib)
 
 ### Compute the include paths
-set(INCLUDES
+
+# Only include public headers by default
+include_directories(
+   ${CMAKE_BINARY_DIR}/include
+   ${CMAKE_HOME_DIRECTORY}/include
+)
+
+# Compute the ones that should be added when compiling the library
+set(INTERNAL_INCLUDES
   ${CMAKE_BINARY_DIR}
-  ${CMAKE_BINARY_DIR}/include
   ${CMAKE_HOME_DIRECTORY}
-  ${CMAKE_HOME_DIRECTORY}/include
   ${CMAKE_HOME_DIRECTORY}/src/include
   )
 
 if(enable_smpi)
-  set (INCLUDES ${INCLUDES} ${CMAKE_HOME_DIRECTORY}/src/smpi/include)
+  set (INTERNAL_INCLUDES ${INTERNAL_INCLUDES} ${CMAKE_HOME_DIRECTORY}/src/smpi/include)
 endif()
 
 if(NOT CMAKE_CROSSCOMPILING AND EXISTS /usr/include/)
-  set(INCLUDES ${INCLUDES} /usr/include/)
+  set(INTERNAL_INCLUDES ${INTERNAL_INCLUDES} /usr/include/)
 endif()
 
 if(WIN32)
@@ -180,12 +167,10 @@ if(WIN32)
   set(CMAKE_LIB_WIN "${CMAKE_C_COMPILER}")
   string(REGEX REPLACE "/bin/gcc.*" "/include"  CMAKE_INCLUDE_WIN "${CMAKE_INCLUDE_WIN}")
   string(REGEX REPLACE "/bin/gcc.*" "/lib"  CMAKE_LIB_WIN "${CMAKE_LIB_WIN}")
-  set(INCLUDES ${INCLUDES} ${CMAKE_INCLUDE_WIN})
+  set(INTERNAL_INCLUDES ${INTERNAL_INCLUDES} ${CMAKE_INCLUDE_WIN})
   unset(CMAKE_INCLUDE_WIN)
 endif()
 
-include_directories(${INCLUDES})
-
 # library dependency cannot start with a space (CMP0004), so initialize it with something that is never desactivated.
 set(SIMGRID_DEP "-lm") 
 
@@ -204,8 +189,6 @@ IF(CMAKE_SYSTEM_PROCESSOR MATCHES ".86|AMD64|amd64")
   ENDIF()
   if (WIN32)
     message(STATUS "Disable fast raw contexts on Windows.")
-  elseif(enable_address_sanitizer)
-    message(STATUS "Disable fast raw contexts with ASan")
   else()
     set(HAVE_RAW_CONTEXTS 1)
   endif()
@@ -254,15 +237,7 @@ if(enable_smpi_papi)
   endif()
 endif()
 
-# Not finding this is perfectly OK
-find_package(Boost COMPONENTS unit_test_framework)
-if (Boost_UNIT_TEST_FRAMEWORK_FOUND)
-  message(STATUS "Enabling the Boost-based unit tests.")
-else()
-  message(STATUS "Disabling the Boost-based unit tests -- please install libboost-test-dev.")
-endif()
-
-
+# But we do need the core of Boost
 find_package(Boost 1.48)
 if(Boost_FOUND)
   include_directories(${Boost_INCLUDE_DIRS})
@@ -274,26 +249,38 @@ else()
   endif()
 endif()
 
-find_package(Boost COMPONENTS context)
-set(Boost_FOUND 1) # This component is optional
+# cmake before 3.13.1 does not know about stacktrace components. Fix it.
+# Usable components: https://www.boost.org/doc/libs/1_65_1/doc/html/stacktrace/configuration_and_build.html
+set(_Boost_STACKTRACE_HEADERS           "boost/stacktrace.hpp")
+set(_Boost_STACKTRACE_BACKTRACE_HEADERS "boost/stacktrace.hpp")
+
+find_package(Boost 1.59 COMPONENTS context stacktrace_backtrace)
+set(Boost_FOUND 1) # These components are optionals
+message(STATUS "Mandatory components found. SimGrid is compilable.")
+message(STATUS "Looking for optional Boost components:")
+
+if (Boost_STACKTRACE_BACKTRACE_FOUND)
+  message (STATUS "  stacktrace: found. Activating human-readable stack traces.")
+  set(HAVE_BOOST_STACKTRACE 1)
+  set(SIMGRID_DEP "${SIMGRID_DEP} -lboost_stacktrace_backtrace")
+else()
+  message (STATUS "  stacktrace: MISSING. Install libboost-stacktrace-dev to display the stacktraces.")
+  set(HAVE_BOOST_STACKTRACE 0)
+endif()
+
 if(Boost_CONTEXT_FOUND)
-  message(STATUS "Found Boost.Context")
+  message (STATUS "  context: found. Activating Boost contexts.")
   set(HAVE_BOOST_CONTEXTS 1)
 else()
-  message ("   boost        : found.")
-  message ("   boost-context: missing. Install libboost-context-dev for this optional feature.")
+  message (STATUS "  context: MISSING. Install libboost-context-dev for this optional feature.")
   set(HAVE_BOOST_CONTEXTS 0)
 endif()
 
+
 # Checks for header libraries functions.
 CHECK_LIBRARY_EXISTS(rt      clock_gettime           "" HAVE_POSIX_GETTIME)
-
-if(NOT APPLE) # OS X El Capitan deprecates this function
-  CHECK_LIBRARY_EXISTS(pthread sem_init                "" HAVE_SEM_INIT_LIB)
-endif()
-CHECK_LIBRARY_EXISTS(pthread sem_open                "" HAVE_SEM_OPEN_LIB)
-set(HAVE_PTHREAD_SETAFFINITY 0)
 CHECK_LIBRARY_EXISTS(pthread pthread_setaffinity_np  "" HAVE_PTHREAD_SETAFFINITY)
+CHECK_INCLUDE_FILE("pthread_np.h" HAVE_PTHREAD_NP_H) # for pthread_setaffinity_np() on FreeBSD
 
 if(CMAKE_SYSTEM_NAME MATCHES "Darwin")
   set(CMAKE_REQUIRED_DEFINITIONS "-D_XOPEN_SOURCE=700 -D_DARWIN_C_SOURCE")
@@ -307,20 +294,17 @@ endif()
 
 CHECK_INCLUDE_FILE("valgrind/valgrind.h" HAVE_VALGRIND_H)
 CHECK_INCLUDE_FILE("unistd.h" HAVE_UNISTD_H)
-CHECK_INCLUDE_FILE("execinfo.h" HAVE_EXECINFO_H)
 CHECK_INCLUDE_FILE("signal.h" HAVE_SIGNAL_H)
 CHECK_INCLUDE_FILE("sys/param.h" HAVE_SYS_PARAM_H)
 CHECK_INCLUDE_FILE("sys/sysctl.h" HAVE_SYS_SYSCTL_H)
 CHECK_INCLUDE_FILE("ucontext.h" HAVE_UCONTEXT_H)
 CHECK_INCLUDE_FILE("linux/futex.h" HAVE_FUTEX_H)
 
-CHECK_FUNCTION_EXISTS(backtrace HAVE_BACKTRACE)
 CHECK_FUNCTION_EXISTS(dlfunc HAVE_DLFUNC)
 CHECK_FUNCTION_EXISTS(gettimeofday HAVE_GETTIMEOFDAY)
 CHECK_FUNCTION_EXISTS(nanosleep HAVE_NANOSLEEP)
 CHECK_FUNCTION_EXISTS(getdtablesize HAVE_GETDTABLESIZE)
 CHECK_FUNCTION_EXISTS(sysconf HAVE_SYSCONF)
-CHECK_FUNCTION_EXISTS(popen HAVE_POPEN)
 CHECK_FUNCTION_EXISTS(process_vm_readv HAVE_PROCESS_VM_READV)
 CHECK_FUNCTION_EXISTS(mmap HAVE_MMAP)
 CHECK_FUNCTION_EXISTS(mremap HAVE_MREMAP)
@@ -333,24 +317,12 @@ if(MINGW)
   set(HAVE_VASPRINTF 1)
 endif()
 
-#Check if __thread is defined
-execute_process(
-  COMMAND "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_thread_storage.c -o testprog"
-  WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
-  RESULT_VARIABLE HAVE_thread_storage_run)
-file(REMOVE testprog)
-if(HAVE_thread_storage_run)
-  set(HAVE_THREAD_LOCAL_STORAGE 1)
-else()
-  set(HAVE_THREAD_LOCAL_STORAGE 0)
-endif()
-
 CHECK_INCLUDE_FILE("sys/sendfile.h" HAVE_SENDFILE_H)
 CHECK_FUNCTION_EXISTS(sendfile HAVE_SENDFILE)
 if(HAVE_SENDFILE_H AND HAVE_SENDFILE)
-  set(HAVE_SENDFILE 1)
+  set(SG_HAVE_SENDFILE 1)
 else()
-  set(HAVE_SENDFILE 0)
+  set(SG_HAVE_SENDFILE 0)
 endif()
 
 if(enable_model-checking AND NOT "${CMAKE_SYSTEM}" MATCHES "Linux|FreeBSD")
@@ -358,7 +330,7 @@ if(enable_model-checking AND NOT "${CMAKE_SYSTEM}" MATCHES "Linux|FreeBSD")
   set(enable_model-checking FALSE)
 endif()
 
-if(HAVE_MMAP AND HAVE_THREAD_LOCAL_STORAGE)
+if(HAVE_MMAP)
   SET(HAVE_MMALLOC 1)
 else()
   SET(HAVE_MMALLOC 0)
@@ -414,7 +386,6 @@ endif()
 if(enable_smpi)
   SET(HAVE_SMPI 1)
   if("${CMAKE_SYSTEM}" MATCHES "Darwin|FreeBSD|Linux")
-    SET(USE_LIBUTIL 0)
     SET(HAVE_PRIVATIZATION 1)
   else()
     message (STATUS "Warning:  no support for SMPI automatic privatization on this platform")
@@ -425,137 +396,7 @@ else()
 endif()
 
 #--------------------------------------------------------------------------------------------------
-### Check for GNU dynamic linker
-CHECK_INCLUDE_FILE("dlfcn.h" HAVE_DLFCN_H)
-if (HAVE_DLFCN_H)
-  execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_gnu_dynlinker.c ${DL_LIBRARY} -o test_gnu_ld
-                  WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
-                  OUTPUT_VARIABLE HAVE_GNU_LD_compil
-  )
-  if(HAVE_GNU_LD_compil)
-    set(HAVE_GNU_LD 0)
-    message(STATUS "Warning: test program toward GNU ld failed to compile:")
-    message(STATUS "${HAVE_GNU_LD_comp_output}")
-  else()
-    execute_process(COMMAND ./test_gnu_ld
-                    WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
-                    RESULT_VARIABLE HAVE_GNU_LD_run
-                    OUTPUT_VARIABLE var_exec
-                   )
-
-    if(NOT HAVE_GNU_LD_run)
-      set(HAVE_GNU_LD 1)
-      message(STATUS "We are using GNU dynamic linker")
-    else()
-      set(HAVE_GNU_LD 0)
-      message(STATUS "Warning: error while checking for GNU ld:")
-      message(STATUS "Test output: '${var_exec}'")
-      message(STATUS "Exit status: ${HAVE_GNU_LD_run}")
-    endif()
-    file(REMOVE test_gnu_ld)
-  endif()
-endif()
-
-#--------------------------------------------------------------------------------------------------
-### Initialize of CONTEXT THREADS
-
-set(HAVE_THREAD_CONTEXTS 0)
-if(CMAKE_USE_PTHREADS_INIT)
-  ### Test that we have a way to create semaphores
-
-  if(HAVE_SEM_OPEN_LIB)
-    execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_open.c -lpthread -o sem_open
-      WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
-      OUTPUT_VARIABLE HAVE_SEM_OPEN_compil
-    )
-
-    # Test sem_open by compiling:
-    if(HAVE_SEM_OPEN_compil)
-      set(HAVE_SEM_OPEN 0)
-      message(STATUS "Warning: sem_open not compilable")
-      message(STATUS "HAVE_SEM_OPEN_comp_output: ${HAVE_SEM_OPEN_comp_output}")
-    else()
-      set(HAVE_SEM_OPEN 1)
-      message(STATUS "sem_open is compilable")
-    endif()
-
-    # If we're not crosscompiling, we check by executing the program:
-    if (HAVE_SEM_OPEN AND NOT CMAKE_CROSSCOMPILING)
-      execute_process(COMMAND ./sem_open
-        WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
-        RESULT_VARIABLE HAVE_SEM_OPEN_run
-        OUTPUT_VARIABLE var_compil
-      )
-      if (NOT HAVE_SEM_OPEN_run)
-        set(HAVE_SEM_OPEN 1)
-        message(STATUS "sem_open is executable")
-      else()
-        set(HAVE_SEM_OPEN 0)
-        if(EXISTS "${CMAKE_BINARY_DIR}/sem_open")
-          message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_open exists!")
-        else()
-          message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_open not exists!")
-        endif()
-        message(STATUS "Warning: sem_open not executable")
-        message(STATUS "Compilation output: '${var_compil}'")
-        message(STATUS "Exit result of sem_open: ${HAVE_SEM_OPEN_run}")
-      endif()
-    endif()
-    file(REMOVE sem_open)
-  else()
-    set(HAVE_SEM_OPEN 0)
-  endif()
-
-  if(HAVE_SEM_INIT_LIB)
-    execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_init.c -lpthread -o sem_init
-      WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
-      RESULT_VARIABLE HAVE_SEM_INIT_run 
-      OUTPUT_VARIABLE HAVE_SEM_INIT_compil)
-
-    # Test sem_init by compiling:
-    if(HAVE_SEM_INIT_compil)
-      set(HAVE_SEM_INIT 0)
-      message(STATUS "Warning: sem_init not compilable")
-      message(STATUS "HAVE_SEM_INIT_comp_output: ${HAVE_SEM_OPEN_comp_output}")
-    else()
-      set(HAVE_SEM_INIT 1)
-      message(STATUS "sem_init is compilable")
-    endif()
-
-    # If we're not crosscompiling, we check by executing the program:
-    if (HAVE_SEM_INIT AND NOT CMAKE_CROSSCOMPILING)
-      execute_process(COMMAND ./sem_init
-        WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
-        RESULT_VARIABLE HAVE_SEM_INIT_run
-        OUTPUT_VARIABLE var_compil
-      )
-      if (NOT HAVE_SEM_INIT_run)
-        set(HAVE_SEM_INIT 1)
-        message(STATUS "sem_init is executable")
-      else()
-        set(HAVE_SEM_INIT 0)
-        if(EXISTS "${CMAKE_BINARY_DIR}/sem_init")
-          message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_init exists!")
-        else()
-          message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_init not exists!")
-        endif()
-        message(STATUS "Warning: sem_init not executable")
-        message(STATUS "Compilation output: '${var_compil}'")
-        message(STATUS "Exit result of sem_init: ${HAVE_SEM_INIT_run}")
-      endif()
-    endif()
-    file(REMOVE sem_init)
-  else() 
-    set(HAVE_SEM_INIT 0)  
-  endif()
-
-  if(NOT HAVE_SEM_OPEN AND NOT HAVE_SEM_INIT)
-    message(FATAL_ERROR "Semaphores are not usable (neither sem_open nor sem_init is both compilable and executable), but they are mandatory to threads (you may need to mount /dev).")
-  endif()
-
-  set(HAVE_THREAD_CONTEXTS 1)
-  message(STATUS "Support for thread context factory ok.")
-endif()
+### Check what context backends are available
 
 set(HAVE_UCONTEXT_CONTEXTS 0)
 if(NOT HAVE_UCONTEXT_H)
@@ -563,8 +404,6 @@ if(NOT HAVE_UCONTEXT_H)
 elseif(APPLE)
   message(STATUS "No ucontext factory: Apple don't want us to use them.")
   set(HAVE_UCONTEXT_H 0)
-elseif(enable_address_sanitizer)
-  message(STATUS "No ucontext factory: ASan does not support it (see http://code.google.com/p/address-sanitizer/issues/detail?id=189)")
 else()
   try_compile(compile_makecontext ${CMAKE_BINARY_DIR} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_makecontext.c
     OUTPUT_VARIABLE compile_makecontext_output)
@@ -618,16 +457,6 @@ endif()
 file(REMOVE test_stackgrowth)
 #--------------------------------------------------------------------------------------------------
 
-if(enable_address_sanitizer OR enable_thread_sanitizer OR enable_undefined_sanitizer)
-  set(HAVE_SANITIZER 1)
-endif()
-
-### check for addr2line
-find_path(ADDR2LINE NAMES addr2line    PATHS NO_DEFAULT_PATHS)
-if(ADDR2LINE)
-  set(ADDR2LINE "${ADDR2LINE}/addr2line")
-endif()
-
 ###############
 ## GIT version check
 ##
@@ -669,21 +498,27 @@ else()
   set(GIT_VERSION "none, release version")
 endif()
 
-### Setup gcc & clang flags
+### Define source packages for Libs
+include(${CMAKE_HOME_DIRECTORY}/tools/cmake/DefinePackages.cmake)
+
+### Setup gcc & clang flags (include after DefinePackage.cmake, and before generating header files)
 if (NOT MSVC)
-  include(${CMAKE_HOME_DIRECTORY}/tools/cmake/GCCFlags.cmake)
+  include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Flags.cmake)
 endif()
 
 ### Generate the required headers and scripts
 #############################################
 
 # Avoid triggering a (full) rebuild by touching the files if they did not really change
-configure_file("${CMAKE_HOME_DIRECTORY}/tools/cmake/src/internal_config.h.in" "${CMAKE_BINARY_DIR}/src/internal_config.h.generated"    @ONLY IMMEDIATE)
-configure_file("${CMAKE_HOME_DIRECTORY}/include/simgrid_config.h.in"          "${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated" @ONLY IMMEDIATE)
+configure_file("${CMAKE_HOME_DIRECTORY}/src/internal_config.h.in"    "${CMAKE_BINARY_DIR}/src/internal_config.h.generated"    @ONLY IMMEDIATE)
+configure_file("${CMAKE_HOME_DIRECTORY}/src/simgrid/version.h.in"    "${CMAKE_BINARY_DIR}/src/simgrid/version.h.generated" @ONLY IMMEDIATE)
+configure_file("${CMAKE_HOME_DIRECTORY}/include/simgrid/config.h.in" "${CMAKE_BINARY_DIR}/include/simgrid/config.h.generated" @ONLY IMMEDIATE)
 execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/src/internal_config.h.generated ${CMAKE_BINARY_DIR}/src/internal_config.h)
-execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated ${CMAKE_BINARY_DIR}/include/simgrid_config.h)
+execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/src/simgrid/version.h.generated ${CMAKE_BINARY_DIR}/src/simgrid/version.h)
+execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/include/simgrid/config.h.generated ${CMAKE_BINARY_DIR}/include/simgrid/config.h)
 file(REMOVE ${CMAKE_BINARY_DIR}/src/internal_config.h.generated)
-file(REMOVE ${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated)
+file(REMOVE ${CMAKE_BINARY_DIR}/include/simgrid/config.h.generated)
+file(REMOVE ${CMAKE_BINARY_DIR}/src/simgrid/version.h.generated)
 
 # We need two versions of the SMPI scripts because they contain the path to the library
 # so, it depends of whether SimGrid is installed, or run from the sources (during the build)
@@ -700,9 +535,20 @@ if(NS3_LIBRARY_PATH)
   set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
 endif()
 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
-set(SMPIMAIN smpimain)
+set(SMPIMAIN ${libdir}/simgrid/smpimain)
+set(SMPIREPLAYMAIN ${libdir}/simgrid/smpireplaymain)
 
 configure_file(${CMAKE_HOME_DIRECTORY}/include/smpi/mpif.h.in ${CMAKE_BINARY_DIR}/include/smpi/mpif.h @ONLY)
+#configure mpif.f90 to build mpi.mod
+if(SMPI_FORTRAN)
+  set(MODULE_MPIF_IN "module mpi")
+  set(MODULE_MPIF_OUT "end module mpi")
+  configure_file(${CMAKE_HOME_DIRECTORY}/include/smpi/mpif.h.in ${CMAKE_BINARY_DIR}/src/smpi/mpif.f90.generated @ONLY)
+  execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/src/smpi/mpif.f90.generated ${CMAKE_BINARY_DIR}/src/smpi/mpif.f90)
+  set(CMAKE_Fortran_MODULE_DIRECTORY ${CMAKE_BINARY_DIR}/include/smpi)
+  add_library(mpi SHARED ${CMAKE_BINARY_DIR}/src/smpi/mpif.f90)
+endif()
+
 foreach(script cc cxx ff f90 run)
   configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpi${script}.in ${CMAKE_BINARY_DIR}/bin/smpi${script} @ONLY)
 endforeach()
@@ -718,7 +564,8 @@ if(NS3_LIBRARY_PATH)
   set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
 endif()
 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
-set(SMPIMAIN ${CMAKE_BINARY_DIR}/bin/smpimain)
+set(SMPIMAIN ${CMAKE_BINARY_DIR}/lib/simgrid/smpimain)
+set(SMPIREPLAYMAIN ${CMAKE_BINARY_DIR}/lib/simgrid/smpireplaymain)
 
 foreach(script cc cxx ff f90 run)
   configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpi${script}.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpi${script} @ONLY)
@@ -733,7 +580,7 @@ endif()
 
 set(generated_headers_to_install
   ${CMAKE_CURRENT_BINARY_DIR}/include/smpi/mpif.h
-  ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid_config.h
+  ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid/config.h
   )
 
 set(generated_headers  ${CMAKE_CURRENT_BINARY_DIR}/src/internal_config.h )
@@ -754,7 +601,7 @@ set(generated_files_to_clean
 if(NOT "${CMAKE_BINARY_DIR}" STREQUAL "${CMAKE_HOME_DIRECTORY}")
   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt COPYONLY)
   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt COPYONLY)
-  configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allReduce.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt COPYONLY)
+  configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allreduce.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allreduce.txt COPYONLY)
   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_barrier.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt COPYONLY)
   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_bcast.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt COPYONLY)
   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_with_isend.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt COPYONLY)
@@ -804,11 +651,27 @@ if(NOT "${CMAKE_BINARY_DIR}" STREQUAL "${CMAKE_HOME_DIRECTORY}")
   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt COPYONLY)
   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt COPYONLY)
 
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/compute_only.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions0.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions1.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/empty.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/empty/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty/actions0.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/empty/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty/actions1.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/mixed.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/mixed/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed/actions0.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/mixed/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed/actions1.txt COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_compute ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive2 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive2 COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_compute_simple ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_simple COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time COPYONLY)
+configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time_and_resources ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time_and_resources COPYONLY)
+
   set(generated_files_to_clean
     ${generated_files_to_clean}
     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt
     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt
-    ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allreduce.txt
     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt
     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt
     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt
@@ -854,18 +717,41 @@ if(NOT "${CMAKE_BINARY_DIR}" STREQUAL "${CMAKE_HOME_DIRECTORY}")
     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt
     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt
     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only.txt
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions0.txt
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/compute_only/actions1.txt
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty.txt
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty/actions0.txt
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/empty/actions1.txt
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed.txt
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed/actions0.txt
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/mixed/actions1.txt
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/replay_multiple_manual.tesh
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_consecutive2
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_compute_simple
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_empty1
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_empty2
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_empty2_same_resources
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_empty2_same_time
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_empty2_same_time_and_resources
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed1
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_resources
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_mixed2_same_time_and_resources
+    ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple_manual_deploy/workload_nojob
     )
 endif()
 
 SET_DIRECTORY_PROPERTIES(PROPERTIES ADDITIONAL_MAKE_CLEAN_FILES
   "${generated_files_to_clean}")
 
-### Define source packages for Libs
-include(${CMAKE_HOME_DIRECTORY}/tools/cmake/DefinePackages.cmake)
+add_custom_target(tests COMMENT "Recompiling the tests")
 
 ### Build some Maintainer files
 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MaintainerMode.cmake)
-include(${CMAKE_HOME_DIRECTORY}/tools/cmake/UnitTesting.cmake)
 
 ### Make Libs
 if(NOT WIN32)
@@ -878,6 +764,64 @@ if(enable_java)
   include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Java.cmake)
 endif()
 
+# Python binding (with pybind11)
+################
+# Our usage of pybind11::overload_cast mandates C++14
+get_property(known_features GLOBAL PROPERTY CMAKE_CXX_KNOWN_FEATURES)
+
+if("cxx_std_14" IN_LIST known_features)
+
+  if(EXISTS ${CMAKE_HOME_DIRECTORY}/pybind11) # Try to use a local copy of pybind11, if any
+    message(STATUS "Use the internal copy of pybind11 (using C++14).")
+    add_subdirectory(${CMAKE_HOME_DIRECTORY}/pybind11)
+    set(pybind11_FOUND ON)
+    
+    set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${CMAKE_HOME_DIRECTORY}/pybind11/tools/)
+    set(Python_ADDITIONAL_VERSIONS 3.7 3.6 3.5 3.4)
+    find_package(PythonLibsNew ${PYBIND11_PYTHON_VERSION} REQUIRED)
+    
+  else()
+    find_package(pybind11 2.2.0)
+  endif()
+  
+  if(NOT PYTHONLIBS_FOUND)
+    message(STATUS "Python libs not found. Turn pybind11 off.")
+
+    set(pybind11_FOUND OFF)
+  endif()
+  
+else()
+  message(STATUS "No support for C++14 detected, don't even search for pybind11.")
+  set(pybind11_FOUND OFF)
+endif()
+unset(known_features)
+
+option(enable_python "Whether the Python bindings are activated." ${pybind11_FOUND}) # ON by default if dependencies are met
+
+if("${CMAKE_SYSTEM}" MATCHES "FreeBSD" AND enable_model-checking AND enable_python)
+  message(WARNING "FreeBSD + Model-Checking + Python = too much for now. Disabling python.")
+  set(enable_python FALSE)
+endif()
+
+if(enable_python)
+  if(pybind11_FOUND)
+    message(STATUS "Found pybind11, with C++14.")
+    pybind11_add_module(python-bindings src/bindings/python/simgrid_python.cpp)
+    target_compile_features(python-bindings PRIVATE cxx_std_14)
+    target_link_libraries(python-bindings PUBLIC simgrid)
+    set_target_properties(python-bindings PROPERTIES
+                          LIBRARY_OUTPUT_NAME simgrid
+                          CXX_VISIBILITY_PRESET "default")
+    add_dependencies(tests python-bindings)
+    set_property(TARGET python-bindings
+                 APPEND PROPERTY INCLUDE_DIRECTORIES "${INTERNAL_INCLUDES}")
+  else()
+    message(FATAL_ERROR "Please install pybind11-dev to build the Python bindings (or disable that option).")
+  endif()
+endif()
+mark_as_advanced(PYBIND11_PYTHON_VERSION)
+mark_as_advanced(pybind11_DIR)
+
 ### Make tests
 if(enable_memcheck_xml)
   set(enable_memcheck true)
@@ -911,9 +855,9 @@ foreach(line ${config_output})
   message("   ${line}")
 endforeach()
 message("##########################################")
-message("####   Content of simgrid_config.h    ####")
+message("####   Content of simgrid/config.h    ####")
 message("##########################################")
-file(STRINGS ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid_config.h config_output)
+file(STRINGS ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid/config.h config_output)
 LIST(REMOVE_AT config_output 0 1 2 3 4 5 6 7 8 9 -1) # Pass the file header
 foreach(line ${config_output})
   message("   ${line}")
@@ -942,6 +886,7 @@ message("                version .............: ${CMAKE_CXX_COMPILER_VERSION}")
 if(${Java_FOUND})
   message("        Compiler: Javac .............: ${Java_JAVAC_EXECUTABLE}")
   message("                version .............: ${Java_VERSION_STRING}")
+  message("                runtime .............: ${Java_JAVA_EXECUTABLE}")
 endif()
 if(CMAKE_Fortran_COMPILER)
   message("        Compiler: Fortran ...........: ${SMPI_Fortran_COMPILER} (id: ${CMAKE_Fortran_COMPILER_ID})")
@@ -969,6 +914,12 @@ if (${Java_FOUND})
 else()
   message("        Compile Java ................: NO")
 endif()
+if(pybind11_FOUND)
+  message("        Compile Python bindings .....: ${enable_python}")
+  message("          module ....................: ${PYTHON_MODULE_PREFIX}simgrid${PYTHON_MODULE_EXTENSION}")
+else()
+  message("        Compile Python bindings .....: NO (disabled, or pybind11 not found)")
+endif()
 message("        Compile Lua .................: ${SIMGRID_HAVE_LUA}")
 message("        Compile Smpi ................: ${HAVE_SMPI}")
 message("          Smpi fortran ..............: ${SMPI_FORTRAN}")