-SimGrid (3.5) unstable; urgency=low
+SimGrid (3.7) NOT RELEASED; urgency=low
+
+ The "sprint cleanups (before spring)" release.
+
+ Models:
+ * We can specify the smpi latency/bandwidth factor with command line
+ add --cfg=smpi/bw_factor:"threshold0:value0;...;thresholdN:valueN"
+ or add --cfg=smpi/lat_factor:"threshold0:value0;...;thresholdN:valueN"
+ You can also use the "config tag" from platform file by adding this line
+ <prop id="smpi/bw_factor" value="threshold0:value0;...;thresholdN:valueN"></prop>
+ (see "example/platforms/tag_config.xml" to use "config tag").
+ Note that the command line supersedes the platform file configuration.
+ * Change the correction factors used in LMM model, according to
+ the latest experiments described in INRIA RR-7821.
+ Accuracy should be improved this way.
+ (TODO: this is not true in the code, yet)
+ * Use the partial invalidation optimization by default for the
+ network too. Should produce the exact same results, only faster.
+ * Major cleanup in surf to merge models and split some optimization
+ mechanisms from the core of the models. As a result you can now
+ specify which model to use (e.g., --cfg=network/model:LV08
+ --cfg=cpu/model:Cas01) and which optimization mode to use
+ (e.g., --cfg=network/optim:lazy --cfg=cpu/optim:TI).
+ Incompatible combinations should err at initialization. See
+ --help-models for the list of all models and optimization modes.
+ * The CLM03 workstation model were dropped for simplicity because it
+ used the deprecated CM02 network model. Use default instead.
+ * Rename the TCP_gamma configuration option to network/TCP_gamma
+ * Rename the coordinates configuration option to
+ network/coordinates, and document it
+ * Use now crosstraffic keyword instead of the terribly misleading
+ fullduplex keyword. It is activated by default now in the current
+ default model, use --cfg=network/crosstraffic:0 to turn it off.
+ * Experimental: new configuration option --cfg=surf/nthreads:N to run
+ analytical models in parallel with N threads (default is 1).
+ * Ongoing refactoring the model parsing to make XML files optional
+ (more work is needed here to fully achieve this goal)
- Checked up to svn r8722 (Mt)
+ MSG:
+ * Deprecate the MSG_task_{get,put} functions and friends.
+ This interface were considered as deprecated since over 2 years,
+ it's time to inform our users that it is.
+ Switch to MSG_task_{send,recv} instead, or declare
+ SIMGRID_DEPRECATED before loading the msg.h if you really need to
+ use these (crappy) functions in your code.
+ These functions will be removed at some point. Stop using them now.
+
+ Simix:
+ * Stabilize the parallel execution mode of user contexts
+ * Introduce configuration variables to control parallel execution:
+ - contexts/synchro: Synchronization mode to use when running
+ contexts in parallel (either futex, posix or busy_wait)
+ - contexts/parallel_threshold: Minimal number of user contexts
+ to be run in parallel (raw contexts only)
+
+ SURF:
+ * Introduce a parallel mode for the models (see surf/nthreads
+ configuration item). In our tests, running the models in parallel
+ never lead to any speedups because they are so fast that the gain
+ of computing each model in parallel does not amortizes the
+ synchronization costs, even when ultra fast futexes are used.
+ This is released anyway because YMMV.
+
+ SimDag:
+ * Performance boost by using a swag internally to compute the set of
+ tasks that are finished and should constitute the return value of
+ SD_simulate.
+
+ SMPI:
+ * Enable it by default now that it is considered rather stable.
+
+ XBT:
+ * Mallocators: allow value NULL for the reset function.
+ * Dicts:
+ - New function xbt_dict_new_homogeneous(void(*)(void*)) to
+ create homogeneous dictionaries, where all the elements share the
+ same free function. Non homogeneous dictionaries will be
+ deprecated in the next release.
+ - Dicts of scalar elements (xbt_dicti_*) are deprecated.
+ - Multi-level dictionaries are deprecated.
+ * mmalloc module:
+ - cleanups and simplifications to make it maintainable again
+ - exotic features (such as memalign and valloc) were removed
+ - The metadata were extended and improved so that the
+ model-checker becomes able to explore and inspect the heaps.
+ - This may induce a performance drop when enable_model-checking is
+ ON in cmake (even if it's not used in the simulation), but it is
+ necessary at this point to get MC working.
+
+ Turn model-checking OFF if simulation performance matters to you.
+
+ -- $date Da SimGrid team <simgrid-devel@lists.gforge.inria.fr>
+
+SimGrid (3.6.2) stable; urgency=low
+
+ The "Not coding new stuff allows to polish old things" release.
+
+ General
+ * New bindings to the NS3 packet level simulator (experimental)
+ * Use the raw (efficient) execution contexts instead of the sysv
+ (portable) ones when possible.
+ * libpcre is now mandatory in any cases since not using it led to
+ severe performance loss and possibly other issues
+ * Update the XML platforms:
+ - G5K: include the latest machine in Nancy
+ - GridPP and LCG: new platforms
+ * Documentation was partially updated, at least (more to come)
+
+ Bug fixes, cosmetics and small improvements
+ * Free terminated processes before the end of the simulation to avoid
+ exhausting the memory of users having very dynamic amount of
+ processes.
+ * Bug fix and cosmetics about canceling non-running tasks
+ * Bug fix about the dot loader's issues when using libcgraph
+
+ Portability
+ * Create an installer for windows with nsis (amd64 and win32)
+ - Add an hello world project to illustrate simgrid project creation.
+ - Embed libpcre into the Simgrid installer to avoid
+ its compilation burden
+ * The raw execution contexts should work on Apple now
+ * Port to Windows 64 bits
+ - Sysv contexts now have an implementation for this arch
+ - GRAS communication features now support this arch
+ * Drop support for borland compiler on windows
+ - this code was not maintained, and we kinda depend on gcc nowadays
+ * Fix portability issues on kfreebsd/gnu: build error about semaphores
+ * Fix portability issue on unstable ubuntu: linker became picky on
+ argument order
+
+ -- Wed Oct 5 15:51:01 CEST 2011 Da SimGrid team <simgrid-devel@lists.gforge.inria.fr>
+
+
+SimGrid (3.6.1) stable; urgency=low
+
+ The "Oops, we broke Macs too" release
+
+ Portability
+ * Fixed contexts detection so that raw ones are used when possible
+ * On Mac, do not use Posix Ucontexts with gcc v4.[1-5] since this
+ leads to a strange error, with user code segfaulting sometimes when
+ the generated code is not perfectly aligned (which is not
+ controllable from the user side, depends on the amount of code)
+
+ XBT
+ * New macro: CATCH_ANONYMOUS, which is like CATCH(e) but without argument.
+
+ -- Mon Jun 27 13:59:03 CEST 2011 Da SimGrid team <simgrid-devel@lists.gforge.inria.fr>
+
+SimGrid (3.6) stable; urgency=medium
+
+ The Summer Release, also known as the "OMG! They Killed Kenny!" version
+
+ Java and Ruby:
+ * Bindings now constitute their own package, separated from the main one.
+ Rationale: reduce our maintenance nightmare by reducing the module coupling
+ They will soon be released on their own on gforge.
+ * In the meanwhile:
+ svn co svn://scm.gforge.inria.fr/svn/simgrid/contrib/trunk/simgrid-java
+ svn co svn://scm.gforge.inria.fr/svn/simgrid/contrib/trunk/simgrid-ruby
+
+ GRAS: It is not considered as stable anymore, but experimental. Sorry.
+ * It's not quite deprecated for now because we have no replacement,
+ but it may soon become the case.
+
+ SMPI
+ * New MPI functions supported: MPI_Comm_disconnect, MPI_Comm_get_name
+ * Fortran: New user-level cache variable to store the rank of the running
+ process. This improves performance by an order of magnitude.
+ * C: New coccinelle script to automatically locate and modify global and
+ local static variables.
+ * Improved SMPI network model with a sender-side gap to account for multiple
+ parallel sends.
+
+ MSG
+ * New function MSG_comm_get_status(). MSG_comm_test() and MSG_comm_testany()
+ only say if a communication is finished, no matter whether it succeeded or
+ failed. You can call MSG_comm_get_status() to know the status of a finished
+ communication.
+ * New function MSG_task_dsend() to send a task and detach it. When a
+ communication is detached, you are never notified of its success or failure
+ and the memory is released automatically once it is finished. This function
+ is useful when you don't care about the end nor the success of a
+ communication.
+ * Change the prototypes of action replay. Sorry for inconvenience,
+ but this is really more efficient this way (and to adapt your code,
+ you just have to fix the initialization, that shouldn't be too long)
+ * Kill the braindead MSG_task_refcount_dec() function. I guess nobody
+ ever managed to do anything useful with it.
+ * New function MSG_comm_testany(). Similarly to MSG_comm_waitany(), it
+ takes a dynar of communications. It returns immediately and gives the
+ index of a finished communication (if any).
+ * New example: a basic implementation of the Chord P2P algorithm.
+
+ SURF
+ * New model for multi-core CPUs. You can now use the core attribute to
+ precise the number of cores of a host. This is a basic model. Every
+ process running on the host receives at most the power provided in
+ the DTD (throughput<=power). Total throughput of process cannot exceed
+ power * num_cores.
+ * New peer tag. This peer tag creates a tiny AS comprising a host and a
+ router linked by an up-link and a down-link (possibly asymmetrical).
+ This kind of pattern allows to easily build last-mile model style platforms.
+ Aggregating such patterns in a rule-based AS is thus the technique of
+ choice for modeling large peer-to-peer/volunteer computing/cloud platforms.
+ * New model for Vivaldi routing. We transformed the Vivaldi network model
+ into a Vivaldi routing model (based on the rule-based model). This allows to
+ combine Vivaldi based latencies with last-mile platforms.
+
+ SIMIX
+ * Added a check for NaN of IEEE754 infinite in the double entries of
+ the smx_user.c file
+ * Introduce a new context factory "raw", highly inspirated from the
+ ucontext factory, but using manually crafted functions in assembly to
+ do the work in an efficient manner.
+ * Allow to change the used context factory at run time, not only at
+ compilation time. Use --cfg=contexts/factory:raw for maximal speed.
+ * Add an option --cfg=contexts/stacksize:N to set the stack size of the user
+ contexts at runtime (only with raw contexts or ucontexts).
+ * Completely rewrote this module to allow parallel execution of user
+ processes. Use --cfg=contexts/nthreads:N to execute user processes
+ with N parallel threads (the default is 1, meaning no parallelism).
+ * Allow to decide dynamically between sequential and parallel modes.
+ When nthreads > 1, you can use --cfg=contexts/threshold:P to run the user
+ processes in parallel only when their number is greater than or equal to P
+ (the default is 2).
+ * Added a check for NaN of IEEE754 infinite in the double entries of
+ the smx_user.c file
+
+ XBT
+ * New command line option: if you pass --cfg=verbose-exit:0, SimGrid
+ won't output the state of processes when interrupted with Ctrl-C
+ * Add a new function xbt_dynar_to_array that transforms a dynar into a
+ NULL-terminated array. This may solve backward compatibility issues
+ due to the change to return type of SD_simulate. See also:
+ http://lists.gforge.inria.fr/pipermail/simgrid-user/2010-December/002206.html
+ * Add new macros with variable number of arguments.
+ - in xbt/log.h: XBT_DEBUG, XBT_VERB, XBT_INFO, etc.
+ - in xbt/asserts.h: xbt_assert
+ - in xbt/cunit.h: xbt_test_{add,fail,assert,log}
+ - in xbt/ex.h: THROWF and RETHROWF.
+ Define XBT_USE_DEPRECATED if you want to use the old numbered macros like
+ INFO1, INFO2, etc.
+ * Change xbt_die() to accept a format string with arguments, just like printf.
+ * New data structure: xbt_lib_t, like a dict but more general and with better
+ memory handling.
+
+ INSTR
+ * New configuration options
+ Options triva/categorized and triva/uncategorized can be used to generate
+ graph configuration files for Triva visualization tool.
+ * Configuration option tracing/platform is renamed to tracing/categorized
+ * XBT logging makes tracing error checks easier, new root log hierarchy: instr
+ * New TRACE_user_link_variable interface:
+ User provides the name of the link and the tracing variable to attach to it
+ * the declaration of tracing categories must be done after the environment
+ creation
+ * simpler tracing interface, just one way to declare categories
+ TRACE_category or TRACE_category_with_color, it is up to you
+ * links in the trace file are again identified by their names
+ * trace contains the full platform hierarchy exactly as declared using the ASes
+ * Options tracing/msg/[task|process]:1 groups the process by hosts
+ for both cases, tasks and processes must have names that are unique during the simulation
+ these options generate traces that are suited to gantt-charts, such as the space-time view of Paje
+ * The experimental option tracing/msg/volume is deprecated
+ its functionality may be reincorporated if needed
+ * Buffering
+ The tracing generates a trace file with unordered timestamped events,
+ because of the way the core simulator (surf) works. A script available
+ at the tools directory (fix-paje-trace.sh) can be used to put the events
+ in order. We have changed the tracing so it can generate ordered timestamped
+ events in the final trace, but depending on the simulator (and how much time
+ is simulated) that can lead to a huge memory utilization. It is deactivated
+ by default, but it can be activated using the --cfg=tracing/buffer:1 switch.
+
+ Build Infrastructure
+ * Define a SIMGRID_VERSION macro in simgrid_config.h.
+ - We are trying hard to keep the API stable, but it may happen that
+ some things change (we're a research project after all, not a
+ nuclear plant operating system). If such things should happen, you
+ could rely on that macro to adapt.
+ - current value: 30600 for 3.06.00, aka 3.6
+ * Define macro MAKE_SIMGRID_VERSION(major, minor, patch) to help building
+ a number that can be compared with SIMGRID_VERSION.
+ * Add a build option -Denable_debug (set to ON by default): when set to OFF,
+ assertions and verbose/debug logging events are disabled at compile time.
+
+ -- Tue Jun 21 08:57:43 CEST 2011 Da SimGrid team <simgrid-devel@lists.gforge.inria.fr>
+
+SimGrid (3.5) stable; urgency=medium
+
+ Model Checking
+ * New feature to any SimGrid-based simulator: Model-Checking
+ Check SIN#1 for more details.
+
+ SMPI
+ * New Model SMPI (three-interval linear regression for correction factors)
+ See RR-7426, available at http://hal.inria.fr/inria-00527150
+ * Ability to use FORTRAN MPI code (through f2c, automatically privatized)
+ * New MPI functions supported: MPI_Get_count(), MPI_Comm_split()
+ * New: RAM folding (see RR-7426 and examples/smpi/NAS/DT-folding)
+ * New: execution sampling (see RR-7426 and examples/smpi/NAS/EP-sampling)
+ * See also src/smpi/README
+
+ Tracing:
+ Tracing:
+ * Tracing system
+ - Tracing API changes: TRACE_start and TRACE_end should not be called
+ by user-code. They are automatically called by simulators created
+ with SimDAG, MSG and SMPI if the toolkit is compiled with
+ tracing_enabled=ON. Categories declaration and utilization remain the
+ same for MSG and SimDag.
+ - A function was added to the tracing API to declare categories with
+ colors:
+ - TRACE_category_with_color (char *category, char *color)
+ where color must be in the following format
+ "%f %f %f", red, green, blue
+ and red, green, blue are float values in the interval [0, 1]
+ - User can specify NULL as color parameter, or continue calling
+ TRACE_category (cat)
+ On that case, the tracing system will define random colors
+ - The following command-line options are supported:
+ --cfg=tracing/filename:msg.trace
+ --cfg=tracing:1 (activate tracing, needed to use others)
+ --cfg=tracing/platform:1 (categorized resource use)
+ --cfg=tracing/uncategorized:1 (uncategorized resource use)
+ --cfg=tracing/msg/task:1 (task creation)
+ --cfg=tracing/msg/process:1 (process creation, migration)
+ --cfg=tracing/msg/volume:1 (volume of MSG send/recv)
+ --cfg=tracing/smpi:1 (SMPI interface tracing)
+ --cfg=tracing/simdag:1 (allow SimDAG tasks receive categories)
+ - examples of examples/msg/tracing updated
+ * Tracing SimDag
+ - DAXLoader and DOTLoader functions can generate tasks with categories
+ - A new function to attribute a category to SD tasks:
+ TRACE_sd_set_task_category (SD_task_t task, char *category)
+ * Tracing the MPI interface implemented by SMPI
+ - Collective operations are traced with states
+ - Point-to-Point operations are traced with states/links
+ - Tracing activated by a parameter "-trace filename" passed
+ to smpirun during execution (considering that simgrid
+ is compiled with tracing enabled)
+ - To run the simulation with gdb, the simulator
+ accepts --cfg=tracing/smpi:1 to trace SMPI
+ - tesh files to check if smpi tracing is ok
+ - See examples/smpi/NAS/DT-trace
+ * GTNetS tracing re-worked
+ - adaptation to the tracing system of GTNets to cope
+ with modifications regarding the fullduplex mode
+ - new tesh files to check if gtnets tracing is ok
MSG
* Asynchronous communications through the functions:
to associate functions to processes, used when bypassing the parser
* New functions: MSG_task_set_name(), MSG_task_set_compute_duration()
- LUA Bindings
- * Add layer to set up environment directly from lua, without XML
- * In GRAS, the effect of gras_stub_generator can be achieved through
- lua too (check examples/gras/console/ping_generator.lua)
- * Modify the entry point, to take into consideration when lua is used only as a platform generator
+ Platforms: Add some more examples in examples/platforms
+ * Grid'5000: see www.grid5000.fr
+ * *_30000_hosts.xml: various huge files [mainly scalability testing]
SURF
* Change the XML format. This is a very important modification. SimGrid
3.5 introduces a new hierarchical format based on the notion of
Autonomous Systems. Compatibility with old format is ensured
- through the perl script provided in the install bin directory
+ through the perl script provided in the install bin directory
bin/simgrid_update_xml.
It is now possible to build platforms with specific routing
mechanism (Full/Dijkstra/DijkstraCache/Floyd) and to easily
connect several platforms together. We will try to provide soon
set of realistic platforms exploiting these properties (have a
look at examples/platforms/ for the moment).
- * Take the opportunity to be a good XML citizen: rename link:ctn to
- link_ctn and similar changes (also dealed with by simgrid_update_xml)
+ * Take the opportunity of the XML format change to be a good XML citizen:
+ rename link:ctn to link_ctn and similar changes (also dealt with by
+ simgrid_update_xml)
* Add a new routing scheme (rule-based) using regular expressions. It
enables to have an extremely low memory footprint when the
underlying routing is simple and can be compactly described. You
term of memory and speed) connect clusters together. Have a look
at teshsuite/simdag/platforms/ to see how this can be done. With
this tag, you can create clusters with thousands of tasks at no
- cost (have a look at examples/platforms/).
+ cost (have a look at examples/platforms/).
Note: clusters are implemented as ASes, so there is no need for an
enclosing AS tag if you have only one cluster in your platform.
- * Add new callbacks to the CPU & netwok models to create resources
- no need to pass through the parser callbacks to do so.
- * Add new function to create routes table via the routing model
- * Add generic functions in the public interface that allows the user to
- call SURF 'create_resource' methods from a lua script.
+ * Add new generic functions in the public interface that allows the user
+ to call SURF 'create_resource' methods from your code (same
+ functionality as the XML bypass mechanism but with a much lighter
+ burden).
* Add a new model (enabled through command line --cfg=network/model:SMPI)
that uses a piecewise linear approximation to produce better
results when exchanging small messages.
for interferences between uplink and downlink communications
(activate with --cfg=fullduplex:1).
- SIMIX
- * New function: SIMIX_process_set_function() called by MSG_set_function
- * Change the underlying waiting queue in semaphores so that a process
- can wait on several of them simultaneously (as in waitany).
- * Fix the way to handle tokens in semaphores so that all access patterns
- work: {acquire, acquire_timeout, waitany} / {release, release_forever}.
- * kill the dirty pimple SIMIX_message_sizes_output()
- Please use (proper) visualization instead
-
SIMDAG
- * Fix a bug in the management of tasks of size 0 in the surf network
- models. This problem was only visible with SIMDAG and you should
- thus disregard results produced with earlier versions if you
- relied on this feature (some tasks were blocked because of this).
- * Fix a bunch of stuff that prevented to use classical models with SIMDAG
- even though your applications were doing only point-to-point
- communications and sequential computations. Now you can really use any
- model you want (of course, if you create real parallel tasks, which are
- not implemented in most models beside ptaskL07, this will abort).
+ * Rename the SD_READY (all dependencies are satisfied and task is
+ scheduled) state in SD_RUNNABLE and define a new SD_SCHEDULABLE (all
+ dependencies are satisfied) state.
+ This prevents a confusion between the notion of "ready to schedule"
+ (SD_SCHEDULABLE) used in DAG scheduling and that of "ready to be
+ simulated" (SD_RUNNABLE) used by the simulation kernel.
* Change the way a task is considered as ready. Instead of removing
dependencies when a task is done, a counter is decreased. This way,
it is always possible to reach ancestors thanks to the
SD_taks_get_parents function (even after the end of the simulation.)
- * Change the level of some logs in sd_global from INFO to VERB. The
- corresponding tests are now less verbose
* Change the return type of SD_Simulate from (SD_task_t*) into
xbt_dynar_t. This function was in handling a dynar internally and
converted it into a NULL terminated array for historical reasons.
- * Rename the SD_READY (all dependencies are satisfied and task is
- scheduled) state in SD_RUNNABLE and define a new SD_SCHEDULABLE (all
- dependencies are satisfied) state.
- This prevents a confusion between the notion of "ready to schedule"
- (SD_SCHEDULABLE) used in DAG scheduling and that of "ready to be
- simulated" (SD_RUNNABLE) used by the simulation kernel.
- * Add an example that scheduling a DAX on an heterogeneous platform
- using a Min-Min strategy
- * new function SD_dotload(char*) to load a DAG described in dot
+ * New function SD_dotload(char*) to load a DAG described in dot
format. This loader and the corresponding examples require the
installation of the graphviz library.
- * new function SD_workstation_get_current_task()
- * Task rate should be -1 by default
- Using 0 as before caused TCP_gamma bound to be ignored.
- This change modifies (fixes) almost every simdag timings.
+ * Fix a bug in the management of tasks of size 0 in the surf network
+ models. This problem was only visible with SIMDAG and you should
+ thus disregard results produced with earlier versions if you
+ relied on this feature (some tasks were blocked because of this).
+ * Fix a bunch of stuff that prevented to use classical models with SIMDAG
+ even though your applications were doing only point-to-point
+ communications and sequential computations. Now you can really use any
+ model you want (of course, if you create real parallel tasks, which are
+ not implemented in most models beside ptaskL07, this will abort).
+ * Add an example that schedules a DAX on an heterogeneous platform
+ using a Min-Min strategy.
+ * New function SD_workstation_get_current_task() that returns the kind
+ of task currently running on a workstation in the sequential access
+ mode.
+ * Raise some warnings when unexecuted tasks remains at the end of the
+ simulation. This is usually caused by cycles in the DAG.
+
+ SIMIX
+ * New function: SIMIX_process_set_function() called by MSG_set_function
+ * Change the underlying waiting queue in semaphores so that a process
+ can wait on several of them simultaneously (as in waitany).
+ * Fix the way to handle tokens in semaphores so that all access patterns
+ work: {acquire, acquire_timeout, waitany} / {release, release_forever}.
+ * kill the dirty pimple SIMIX_message_sizes_output()
+ Please use (proper) visualization instead
XBT
* New data container: setset (set of sets of elements)
* New functions: xbt_dynar_sort(), xbt_dynar_compare()
* New function: xbt_dynar_is_empty()
* New function: xbt_fifo_get_last_item()
- * Bug fix in xbt_dynar_shrink(): use the right element size
- * Multiple bug fixes in semaphores which were wrongly implemented
+ * Fix xbt_dynar_shrink(): use the right element size.
+ * Fix xbt_dynar_set*(): allow index larger than current size and memset 0
+ uninitialized areas during expand.
+ * Fix semaphores: previous implementation was severely broken.
* Use library init/fini functions for our initialization.
- you can use logs and other feature as soon as you want in your
code (even before the xbt_init / MSG_init)
- xbt_exit is now a no-op and produce a warning when used.
GRAS:
- * New function: gras_msgtype_get_name()
- * Implement gras_agent_spawn in RL too (the prototype changed a bit)
- * Port GRAS to new SIMIX deployments. This allows gras users to
- benefit from the lastest improvement to the simulation kernel.
+ * Port GRAS to new SIMIX mechanisms. This allows gras users to
+ benefit from the latest improvement to the simulation kernel.
* Kill measurement sockets for now. If you rely on them, sorry. This
release is not for you. This feature will be reintroduced in the
future, but we cannot delay the release any further.
- * Finally fixed the pmm example. It should not randomly fail anymore
-
- SMPI
- * New Model SMPI (three-interval linear regression for correction factors)
- See RR-7426, available at http://hal.inria.fr/inria-00527150
- * Ability to use fortran MPI code (through f2c, automatically privatized)
- * New MPI functions supported: MPI_Get_count(), MPI_Comm_split()
- * New: RAM folding (see RR-7426 and examples/smpi/NAS/DT-folding)
- * New: execution sampling (see RR-7426 and examples/smpi/NAS/EP-sampling)
- * See also src/smpi/README
+ * New function: gras_msgtype_get_name().
+ * Implement gras_agent_spawn in RL too (the prototype changed a bit)
+ * Fix (at last) the pmm example: it should not randomly fail anymore.
Build chain: bug fixes and overall polishing
+ * Cmake is now stable enough. Hence, we killed the autotools.
+ * Port to windows ( TM :)
* Fix the 'make install' target.
No need to use 'make install-simgrid' anymore
* Introduce a 'make dist' target compiling a *source* archive
'make package' compiles a binary archive
* Compile java files only on need
* Add --cd and --setenv command line options to tesh
- * Port to windows
* Out of source builds are not fully supported yet, but we are close
* Enable supernovae and optimization flags by default for our users
- Platforms: Add some more examples in examples/platforms
- * Grid'5000: see www.grid5000.fr
- * *_30000_hosts.xml: various huge files [mainly scalability testing]
-
- Tracing:
- * Tracing system
- - tracing API for MSG changes: TRACE_start has no
- longer parameters, the trace file is supplied through
- an option passed to simulator. Categories declaration
- and utilization remain the same. The following options
- are supported:
- --cfg=tracing/filename:msg.trace
- --cfg=tracing/platform:1 (categorized resource use)
- --cfg=tracing/msg/task:1 (task creation)
- --cfg=tracing/msg/process:1 (process creation, migration)
- --cfg=tracing/msg/volume:1 (volume of msg send/recv)
- --cfg=tracing/smpi:1 (smpi interface tracing)
- - examples of examples/msg/tracing updated
-
- * Tracing the MPI interface implemented by SMPI
- - Collective operations are traced with states
- - Point-to-Point operations are traced with states/links
- - Tracing activated by a parameter "-trace filename" passed
- to smpirun during execution (considering that simgrid
- is compiled with tracing enabled)
- - To run the simulation with gdb, the simulator
- accepts --cfg=tracing/smpi:1 to trace SMPI
- - tesh files to check if smpi tracing is ok
- - See examples/smpi/NAS/DT-trace
-
- * GTNetS tracing re-worked
- - adaptation to the tracing system of GTNets to cope
- with modifications regarding the fullduplex mode
- - new tesh files to check if gtnets tracing is ok
-
- * New feature to any SimGrid-based simulator: Model-Checking
- Check SIN#1 for more details.
+ LUA Bindings
+ * Add layer to set up environment directly from lua, without XML.
+ * The effect of gras_stub_generator can be achieved through
+ lua too (check examples/gras/console/ping_generator.lua)
- -- Da SimGrid team <simgrid-devel@lists.gforge.inria.fr>
+ -- Wed, 01 Dec 2010 22:09:23 +0100 Da SimGrid team <simgrid-devel@lists.gforge.inria.fr>
SimGrid (3.4.1) stable; urgency=low
and (2) msg_size. This was changed to (1) msg_size and (2) amount of
messages. This was need for the fool willing to send more than MAXINT
bytes on quite fat pipes.
-
+
AMOK:
* Do really rename the hostmanagement module to peermanagement. [Mt]
Ie, rename functions from amok_hm_* to amok_pm_*. This breaks the API,
. Lesson 6: Logging informations properly
. Lesson 7: Using internal timers
. Lesson 8: Handling errors through exceptions
- . Lesson 9: Exchanging simple data
- . Lesson 10: Remote Procedure Calling (RPC)
- . Lesson 11: Explicitely waiting for messages
- . Recapping of message passing features in GRAS
+ . Lesson 9: Exchanging simple data
+ . Lesson 10: Remote Procedure Calling (RPC)
+ . Lesson 11: Explicitely waiting for messages
+ . Recapping of message passing features in GRAS
- A HOWTO section containing:
o HOWTO design a GRAS application
More are due, of course. They will come latter. In the meanwhile, you can
directly on top of SURF and provides an API rather close to the old
SG. Some old codes using SG are currently under rewrite to check that
all needful functions are provided. [Christophe Thiery]
-
+
SURF:
* Complete rewrite of the KCCFLN05 workstation model. It is now an
extension of the classical CLM03 model that gracefully handles
SURF:
* Add additionnal checkings on communications. Assert that two
communicating hosts are connected by a set of links... [AL]
-
+
MSG:
* Add additionnal checkings on channel values in communication [AL]
* New: MSG_task_get_source to see on which host a task was generated [HC]
by host. [AL]
* New: MSG_error_t MSG_task_get_from_host(m_task_t * task, int channel, m_host_t host);
waits for the first task coming from a given host.. [AL]
-
+
GRAS new functionnalities: [MQ]
* Enhance the parsing macro to allow the size of multidimentional objects
to be given thru annotations.
* New! Give the possibility to hijack the surf parser and thus bypass
MSG_create_environment and MSG_launch_application. Have a look at
examples/msg/msg_test_surfxml_bypassed.c to see how it can be done.
-
+
-- Arnaud Legrand <simgrid-devel@lists.gforge.inria.fr> Sat, 20 Aug 2005 23:25:25 -0700
SimGrid (2.96) unstable; urgency=low
- Main loop and datastructures of SURF. A cpu resource object is
functional. Surf can thus be used to create cpu's with variable
performance on which you can execute some actions.
-
+
2004-11-15 Martin Quinson
- Port to ARM. Simply added the alignment and size descriptions. Should
work, but the ARM machines are so slow that I didn't had the opportunity
