/* The "const" storage-class-modifier is valid. */
#define YY_USE_CONST
-#else /* ! __cplusplus */
+#else /* ! __cplusplus */
/* C99 requires __STDC__ to be defined as 1. */
#if defined (__STDC__)
#define YY_USE_CONST
-#endif /* defined (__STDC__) */
-#endif /* ! __cplusplus */
+#endif /* defined (__STDC__) */
+#endif /* ! __cplusplus */
#ifdef YY_USE_CONST
#define yyconst const
/* Return all but the first "n" matched characters back to the input stream. */
#define yyless(n) \
- do \
- { \
- /* Undo effects of setting up dax_text. */ \
+ do \
+ { \
+ /* Undo effects of setting up dax_text. */ \
int yyless_macro_arg = (n); \
YY_LESS_LINENO(yyless_macro_arg);\
- *yy_cp = (yy_hold_char); \
- YY_RESTORE_YY_MORE_OFFSET \
- (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \
- YY_DO_BEFORE_ACTION; /* set up dax_text again */ \
- } \
- while ( 0 )
+ *yy_cp = (yy_hold_char); \
+ YY_RESTORE_YY_MORE_OFFSET \
+ (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \
+ YY_DO_BEFORE_ACTION; /* set up dax_text again */ \
+ } \
+ while ( 0 )
#define unput(c) yyunput( c, (yytext_ptr) )
#ifndef YY_STRUCT_YY_BUFFER_STATE
#define YY_STRUCT_YY_BUFFER_STATE
struct yy_buffer_state
- {
- FILE *yy_input_file;
-
- char *yy_ch_buf; /* input buffer */
- char *yy_buf_pos; /* current position in input buffer */
-
- /* Size of input buffer in bytes, not including room for EOB
- * characters.
- */
- yy_size_t yy_buf_size;
-
- /* Number of characters read into yy_ch_buf, not including EOB
- * characters.
- */
- int yy_n_chars;
-
- /* Whether we "own" the buffer - i.e., we know we created it,
- * and can realloc() it to grow it, and should free() it to
- * delete it.
- */
- int yy_is_our_buffer;
-
- /* Whether this is an "interactive" input source; if so, and
- * if we're using stdio for input, then we want to use getc()
- * instead of fread(), to make sure we stop fetching input after
- * each newline.
- */
- int yy_is_interactive;
-
- /* Whether we're considered to be at the beginning of a line.
- * If so, '^' rules will be active on the next match, otherwise
- * not.
- */
- int yy_at_bol;
+ {
+ FILE *yy_input_file;
+
+ char *yy_ch_buf; /* input buffer */
+ char *yy_buf_pos; /* current position in input buffer */
+
+ /* Size of input buffer in bytes, not including room for EOB
+ * characters.
+ */
+ yy_size_t yy_buf_size;
+
+ /* Number of characters read into yy_ch_buf, not including EOB
+ * characters.
+ */
+ int yy_n_chars;
+
+ /* Whether we "own" the buffer - i.e., we know we created it,
+ * and can realloc() it to grow it, and should free() it to
+ * delete it.
+ */
+ int yy_is_our_buffer;
+
+ /* Whether this is an "interactive" input source; if so, and
+ * if we're using stdio for input, then we want to use getc()
+ * instead of fread(), to make sure we stop fetching input after
+ * each newline.
+ */
+ int yy_is_interactive;
+
+ /* Whether we're considered to be at the beginning of a line.
+ * If so, '^' rules will be active on the next match, otherwise
+ * not.
+ */
+ int yy_at_bol;
int yy_bs_lineno; /**< The line count. */
int yy_bs_column; /**< The column count. */
- /* Whether to try to fill the input buffer when we reach the
- * end of it.
- */
- int yy_fill_buffer;
+ /* Whether to try to fill the input buffer when we reach the
+ * end of it.
+ */
+ int yy_fill_buffer;
- int yy_buffer_status;
+ int yy_buffer_status;
#define YY_BUFFER_NEW 0
#define YY_BUFFER_NORMAL 1
- /* When an EOF's been seen but there's still some text to process
- * then we mark the buffer as YY_EOF_PENDING, to indicate that we
- * shouldn't try reading from the input source any more. We might
- * still have a bunch of tokens to match, though, because of
- * possible backing-up.
- *
- * When we actually see the EOF, we change the status to "new"
- * (via dax_restart()), so that the user can continue scanning by
- * just pointing dax_in at a new input file.
- */
+ /* When an EOF's been seen but there's still some text to process
+ * then we mark the buffer as YY_EOF_PENDING, to indicate that we
+ * shouldn't try reading from the input source any more. We might
+ * still have a bunch of tokens to match, though, because of
+ * possible backing-up.
+ *
+ * When we actually see the EOF, we change the status to "new"
+ * (via dax_restart()), so that the user can continue scanning by
+ * just pointing dax_in at a new input file.
+ */
#define YY_BUFFER_EOF_PENDING 2
- };
+ };
#endif /* !YY_STRUCT_YY_BUFFER_STATE */
/* Stack of input buffers. */
/* yy_hold_char holds the character lost when dax_text is formed. */
static char yy_hold_char;
-static int yy_n_chars; /* number of characters read into yy_ch_buf */
+static int yy_n_chars; /* number of characters read into yy_ch_buf */
int dax_leng;
/* Points to current character in buffer. */
static char *yy_c_buf_p = (char *) 0;
-static int yy_init = 0; /* whether we need to initialize */
-static int yy_start = 0; /* start state number */
+static int yy_init = 0; /* whether we need to initialize */
+static int yy_start = 0; /* start state number */
/* Flag which is used to allow dax_wrap()'s to do buffer switches
* instead of setting up a fresh dax_in. A bit of a hack ...
#define yy_new_buffer dax__create_buffer
#define yy_set_interactive(is_interactive) \
- { \
- if ( ! YY_CURRENT_BUFFER ){ \
+ { \
+ if ( ! YY_CURRENT_BUFFER ){ \
dax_ensure_buffer_stack (); \
- YY_CURRENT_BUFFER_LVALUE = \
+ YY_CURRENT_BUFFER_LVALUE = \
dax__create_buffer(dax_in,YY_BUF_SIZE ); \
- } \
- YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \
- }
+ } \
+ YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \
+ }
#define yy_set_bol(at_bol) \
- { \
- if ( ! YY_CURRENT_BUFFER ){\
+ { \
+ if ( ! YY_CURRENT_BUFFER ){\
dax_ensure_buffer_stack (); \
- YY_CURRENT_BUFFER_LVALUE = \
+ YY_CURRENT_BUFFER_LVALUE = \
dax__create_buffer(dax_in,YY_BUF_SIZE ); \
- } \
- YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \
- }
+ } \
+ YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \
+ }
#define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol)
* corresponding action - sets up dax_text.
*/
#define YY_DO_BEFORE_ACTION \
- (yytext_ptr) = yy_bp; \
- dax_leng = (size_t) (yy_cp - yy_bp); \
- (yy_hold_char) = *yy_cp; \
- *yy_cp = '\0'; \
- (yy_c_buf_p) = yy_cp;
+ (yytext_ptr) = yy_bp; \
+ dax_leng = (size_t) (yy_cp - yy_bp); \
+ (yy_hold_char) = *yy_cp; \
+ *yy_cp = '\0'; \
+ (yy_c_buf_p) = yy_cp;
#define YY_NUM_RULES 140
#define YY_END_OF_BUFFER 141
/* This struct is not used in this scanner,
but its presence is necessary. */
struct yy_trans_info
- {
- flex_int32_t yy_verify;
- flex_int32_t yy_nxt;
- };
+ {
+ flex_int32_t yy_verify;
+ flex_int32_t yy_nxt;
+ };
static yyconst flex_int16_t yy_accept[775] =
{ 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
* This program was generated with the FleXML XML processor generator.
* FleXML is Copyright (C) 1999-2005 Kristoffer Rose. All rights reserved.
* FleXML is Copyright (C) 2003-2011 Martin Quinson. All rights reserved.
- * (Id: flexml.pl,v 1.67 2011/11/01 20:49:21 mquinson Exp).
+ * (Id: flexml.pl,v 1.69 2012/12/20 00:13:40 mquinson Exp).
*
* There are two, intertwined parts to this program, part A and part B.
*
const char rcs_dax__flexml_skeleton[] =
"$" "Id: skel,v 1.40 2007/10/11 09:57:24 mquinson Exp $";
const char rcs_dax__flexml[] =
- "$" "Id: flexml.pl,v 1.67 2011/11/01 20:49:21 mquinson Exp $";
+ "$" "Id: flexml.pl,v 1.69 2012/12/20 00:13:40 mquinson Exp $";
/* ANSI headers. */
#include <stdlib.h> /* for realloc() -- needed here when using flex 2.5.4 */
/* XML state. */
#ifdef FLEX_DEBUG
-# define ENTER(state) debug_enter(state,#state)
-# define LEAVE debug_leave()
-# define SET(state) debug_set(state,#state)
+# define ENTER(state) debug_enter(state,#state)
+# define LEAVE debug_leave()
+# define SET(state) debug_set(state,#state)
static void debug_enter(int, const char*);
static void debug_leave(void);
static void debug_set(int, const char*);
#else
-# define ENTER(state) (yy_push_state(state))
-# define LEAVE (yy_pop_state())
-# define SET(state) BEGIN(state)
+# define ENTER(state) (yy_push_state(state))
+# define LEAVE (yy_pop_state())
+# define SET(state) BEGIN(state)
#endif
/* Generic actions. */
-#define SKIP /*skip*/
+#define SKIP /*skip*/
#define SUCCEED CLEANUP; return 0
-#define FAIL return fail
+#define FAIL return fail
static int fail(const char*, ...);
enum {flexml_max_err_msg_size = 512};
static int ck_blimit()
{
if (bnext >= blimit) {
- blimit += FLEXML_BUFFERSTACKSIZE + 2;
- {
- char *temp = (char *) realloc(dax__bufferstack, blimit);
- assert(temp);
- dax__bufferstack = temp;
- }
+ blimit += FLEXML_BUFFERSTACKSIZE + 2;
+ {
+ char *temp = (char *) realloc(dax__bufferstack, blimit);
+ assert(temp);
+ dax__bufferstack = temp;
+ }
}
return 0;
}
static int ck_ilimit()
{
if (inext >= ilimit) {
- ilimit += FLEXML_INDEXSTACKSIZE + 2;
- {
- int *temp = (int *) realloc(indexstack, ilimit);
- assert(temp);
- indexstack = temp;
- }
+ ilimit += FLEXML_INDEXSTACKSIZE + 2;
+ {
+ int *temp = (int *) realloc(indexstack, ilimit);
+ assert(temp);
+ indexstack = temp;
+ }
}
return 0;
}
#ifdef FLEXML_NEED_BUFFERLIT
static void dax__bufferliteral(char c, int* pp, const char* text)
{
- const char *s = (c ? strchr(text,c) : text-1), *e = strrchr(text,c);
- assert(s <= e); BUFFERSET(*pp);
- while (++s<e) {
- if (isspace(*s) && c) { BUFFERPUTC(' '); while (isspace(*s)) ++s; }
- else BUFFERPUTC(*s);
- }
- BUFFERDONE;
+ BUFFERSET(*pp);
+ if (c) {
+ const char *s = strchr(text, c), *e = strrchr(text, c);
+ assert(s && e && s <= e);
+ ++s;
+ while (s < e) {
+ if (isspace(*s)) {
+ BUFFERPUTC(' ');
+ do ++s; while (s < e && isspace(*s));
+ } else
+ BUFFERPUTC(*s++);
+ }
+ } else {
+ const char *s = text;
+ while (*s)
+ BUFFERPUTC(*s++);
+ }
+ BUFFERDONE;
}
#endif
/* Miscellaneous. */
/* Parser states (flex `exclusive start conditions'):
*
- * PROLOG the XML prolog of the document before <?xml...>
- * DOCTYPE the XML prolog of the document after <?xml...>
- * EPILOG after the root element
- * INCOMMENT inside an XML comment <!--....-->
- * INPI inside an XML PI <?...?>
- * VALUE1 inside a '...'-delimited literal
- * VALUE2 inside a "..."-delimited literal
- * CDATA inside a <![CDATA[...] ]> section.
- * ROOT_<tag> expect root element <tag>
- * AL_<tag> inside the attribute list for <tag>
- * IN_<tag> inside a <tag> with element contents (ready for end tag)
- * IMPOSSIBLE dummy to permit disabling rules; must be last
+ * PROLOG the XML prolog of the document before <?xml...>
+ * DOCTYPE the XML prolog of the document after <?xml...>
+ * EPILOG after the root element
+ * INCOMMENT inside an XML comment <!--....-->
+ * INPI inside an XML PI <?...?>
+ * VALUE1 inside a '...'-delimited literal
+ * VALUE2 inside a "..."-delimited literal
+ * CDATA inside a <![CDATA[...] ]> section.
+ * ROOT_<tag> expect root element <tag>
+ * AL_<tag> inside the attribute list for <tag>
+ * IN_<tag> inside a <tag> with element contents (ready for end tag)
+ * IMPOSSIBLE dummy to permit disabling rules; must be last
*/
/* State names. */
*/
#ifndef YY_INPUT
#define YY_INPUT(buf,result,max_size) \
- if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \
- { \
- int c = '*'; \
- size_t n; \
- for ( n = 0; n < max_size && \
- (c = getc( dax_in )) != EOF && c != '\n'; ++n ) \
- buf[n] = (char) c; \
- if ( c == '\n' ) \
- buf[n++] = (char) c; \
- if ( c == EOF && ferror( dax_in ) ) \
- YY_FATAL_ERROR( "input in flex scanner failed" ); \
- result = n; \
- } \
- else \
- { \
- errno=0; \
- while ( (result = fread(buf, 1, max_size, dax_in))==0 && ferror(dax_in)) \
- { \
- if( errno != EINTR) \
- { \
- YY_FATAL_ERROR( "input in flex scanner failed" ); \
- break; \
- } \
- errno=0; \
- clearerr(dax_in); \
- } \
- }\
+ if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \
+ { \
+ int c = '*'; \
+ size_t n; \
+ for ( n = 0; n < max_size && \
+ (c = getc( dax_in )) != EOF && c != '\n'; ++n ) \
+ buf[n] = (char) c; \
+ if ( c == '\n' ) \
+ buf[n++] = (char) c; \
+ if ( c == EOF && ferror( dax_in ) ) \
+ YY_FATAL_ERROR( "input in flex scanner failed" ); \
+ result = n; \
+ } \
+ else \
+ { \
+ errno=0; \
+ while ( (result = fread(buf, 1, max_size, dax_in))==0 && ferror(dax_in)) \
+ { \
+ if( errno != EINTR) \
+ { \
+ YY_FATAL_ERROR( "input in flex scanner failed" ); \
+ break; \
+ } \
+ errno=0; \
+ clearerr(dax_in); \
+ } \
+ }\
\
#endif
#endif
#define YY_RULE_SETUP \
- YY_USER_ACTION
+ YY_USER_ACTION
/** The main scanner function which does all the work.
*/
YY_DECL
{
- register yy_state_type yy_current_state;
- register char *yy_cp, *yy_bp;
- register int yy_act;
+ register yy_state_type yy_current_state;
+ register char *yy_cp, *yy_bp;
+ register int yy_act;
/* Bypass Flex's default INITIAL state and begin by parsing the XML prolog. */
SET(PROLOG);
/* COMMENTS and PIs: handled uniformly for efficiency. */
- if ( !(yy_init) )
- {
- (yy_init) = 1;
+ if ( !(yy_init) )
+ {
+ (yy_init) = 1;
#ifdef YY_USER_INIT
- YY_USER_INIT;
+ YY_USER_INIT;
#endif
- if ( ! (yy_start) )
- (yy_start) = 1; /* first start state */
+ if ( ! (yy_start) )
+ (yy_start) = 1; /* first start state */
- if ( ! dax_in )
- dax_in = stdin;
+ if ( ! dax_in )
+ dax_in = stdin;
- if ( ! dax_out )
- dax_out = stdout;
+ if ( ! dax_out )
+ dax_out = stdout;
- if ( ! YY_CURRENT_BUFFER ) {
- dax_ensure_buffer_stack ();
- YY_CURRENT_BUFFER_LVALUE =
- dax__create_buffer(dax_in,YY_BUF_SIZE );
- }
+ if ( ! YY_CURRENT_BUFFER ) {
+ dax_ensure_buffer_stack ();
+ YY_CURRENT_BUFFER_LVALUE =
+ dax__create_buffer(dax_in,YY_BUF_SIZE );
+ }
- dax__load_buffer_state( );
- }
+ dax__load_buffer_state( );
+ }
- while ( 1 ) /* loops until end-of-file is reached */
- {
- yy_cp = (yy_c_buf_p);
+ while ( 1 ) /* loops until end-of-file is reached */
+ {
+ yy_cp = (yy_c_buf_p);
- /* Support of dax_text. */
- *yy_cp = (yy_hold_char);
+ /* Support of dax_text. */
+ *yy_cp = (yy_hold_char);
- /* yy_bp points to the position in yy_ch_buf of the start of
- * the current run.
- */
- yy_bp = yy_cp;
+ /* yy_bp points to the position in yy_ch_buf of the start of
+ * the current run.
+ */
+ yy_bp = yy_cp;
- yy_current_state = (yy_start);
+ yy_current_state = (yy_start);
yy_match:
- do
- {
- register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)];
- if ( yy_accept[yy_current_state] )
- {
- (yy_last_accepting_state) = yy_current_state;
- (yy_last_accepting_cpos) = yy_cp;
- }
- while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
- {
- yy_current_state = (int) yy_def[yy_current_state];
- if ( yy_current_state >= 775 )
- yy_c = yy_meta[(unsigned int) yy_c];
- }
- yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
- ++yy_cp;
- }
- while ( yy_base[yy_current_state] != 2164 );
+ do
+ {
+ register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)];
+ if ( yy_accept[yy_current_state] )
+ {
+ (yy_last_accepting_state) = yy_current_state;
+ (yy_last_accepting_cpos) = yy_cp;
+ }
+ while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
+ {
+ yy_current_state = (int) yy_def[yy_current_state];
+ if ( yy_current_state >= 775 )
+ yy_c = yy_meta[(unsigned int) yy_c];
+ }
+ yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
+ ++yy_cp;
+ }
+ while ( yy_base[yy_current_state] != 2164 );
yy_find_action:
- yy_act = yy_accept[yy_current_state];
- if ( yy_act == 0 )
- { /* have to back up */
- yy_cp = (yy_last_accepting_cpos);
- yy_current_state = (yy_last_accepting_state);
- yy_act = yy_accept[yy_current_state];
- }
-
- YY_DO_BEFORE_ACTION;
-
- if ( yy_act != YY_END_OF_BUFFER && yy_rule_can_match_eol[yy_act] )
- {
- int yyl;
- for ( yyl = 0; yyl < dax_leng; ++yyl )
- if ( dax_text[yyl] == '\n' )
-
+ yy_act = yy_accept[yy_current_state];
+ if ( yy_act == 0 )
+ { /* have to back up */
+ yy_cp = (yy_last_accepting_cpos);
+ yy_current_state = (yy_last_accepting_state);
+ yy_act = yy_accept[yy_current_state];
+ }
+
+ YY_DO_BEFORE_ACTION;
+
+ if ( yy_act != YY_END_OF_BUFFER && yy_rule_can_match_eol[yy_act] )
+ {
+ int yyl;
+ for ( yyl = 0; yyl < dax_leng; ++yyl )
+ if ( dax_text[yyl] == '\n' )
+
dax_lineno++;
;
- }
+ }
-do_action: /* This label is used only to access EOF actions. */
+do_action: /* This label is used only to access EOF actions. */
- switch ( yy_act )
- { /* beginning of action switch */
- case 0: /* must back up */
- /* undo the effects of YY_DO_BEFORE_ACTION */
- *yy_cp = (yy_hold_char);
- yy_cp = (yy_last_accepting_cpos);
- yy_current_state = (yy_last_accepting_state);
- goto yy_find_action;
+ switch ( yy_act )
+ { /* beginning of action switch */
+ case 0: /* must back up */
+ /* undo the effects of YY_DO_BEFORE_ACTION */
+ *yy_cp = (yy_hold_char);
+ yy_cp = (yy_last_accepting_cpos);
+ yy_current_state = (yy_last_accepting_state);
+ goto yy_find_action;
case 1:
YY_RULE_SETUP
ENTER(INCOMMENT);
- YY_BREAK
+ YY_BREAK
case 2:
YY_RULE_SETUP
ENTER(INPI);
- YY_BREAK
+ YY_BREAK
case 3:
YY_RULE_SETUP
LEAVE;
- YY_BREAK
+ YY_BREAK
case 4:
case 5:
case 6:
/* rule 6 can match eol */
YY_RULE_SETUP
SKIP;
- YY_BREAK
+ YY_BREAK
case YY_STATE_EOF(INCOMMENT):
FAIL("EOF in comment.");
- YY_BREAK
+ YY_BREAK
case 7:
YY_RULE_SETUP
LEAVE;
- YY_BREAK
+ YY_BREAK
case 8:
case 9:
/* rule 9 can match eol */
YY_RULE_SETUP
SKIP;
- YY_BREAK
+ YY_BREAK
case YY_STATE_EOF(INPI):
FAIL("EOF in PI (processing instruction).");
- YY_BREAK
+ YY_BREAK
/* SPACES: skipped uniformly */
case 10:
/* rule 10 can match eol */
YY_RULE_SETUP
SKIP;
- YY_BREAK
+ YY_BREAK
/* PROLOG: determine root element and process it. */
case 11:
/* rule 11 can match eol */
YY_RULE_SETUP
SET(ROOT_dax__adag);
- YY_BREAK
+ YY_BREAK
case 12:
/* rule 12 can match eol */
YY_RULE_SETUP
FAIL("Bad declaration %s.",dax_text);
- YY_BREAK
+ YY_BREAK
case 13:
/* rule 13 can match eol */
YY_RULE_SETUP
SET(ROOT_dax__adag);
- YY_BREAK
+ YY_BREAK
case 14:
/* rule 14 can match eol */
YY_RULE_SETUP
FAIL("Bad declaration %s.",dax_text);
- YY_BREAK
+ YY_BREAK
case 15:
YY_RULE_SETUP
FAIL("Unexpected character `%c' in prolog.", dax_text[0]);
- YY_BREAK
+ YY_BREAK
case YY_STATE_EOF(PROLOG):
case YY_STATE_EOF(DOCTYPE):
FAIL("EOF in prolog.");
- YY_BREAK
+ YY_BREAK
/* RULES DERIVED FROM DTD. */
/* <!-- Small DTD for DAX files. --> */
/* rule 16 can match eol */
YY_RULE_SETUP
FAIL("Starting tag <adag> is not allowed here.");
- YY_BREAK
+ YY_BREAK
case 17:
/* rule 17 can match eol */
YY_RULE_SETUP
dax__adag_childCount_isset = 0;
ENTER(AL_dax__adag); pushbuffer(0);
}
- YY_BREAK
+ YY_BREAK
case 18:
/* rule 18 can match eol */
YY_RULE_SETUP
if (dax__adag_xmlns_isset != 0) {FAIL("Multiple definition of attribute xmlns in <dax__adag>");} dax__adag_xmlns_isset = 1; ENTER(VALUE1); BUFFERSET(AX_dax__adag_xmlns);
- YY_BREAK
+ YY_BREAK
case 19:
/* rule 19 can match eol */
YY_RULE_SETUP
if (dax__adag_xmlns_isset != 0) {FAIL("Multiple definition of attribute xmlns in <dax__adag>");} dax__adag_xmlns_isset = 1; ENTER(VALUE2); BUFFERSET(AX_dax__adag_xmlns);
- YY_BREAK
+ YY_BREAK
case 20:
/* rule 20 can match eol */
YY_RULE_SETUP
if (dax__adag_xmlns_c_xsi_isset != 0) {FAIL("Multiple definition of attribute xmlns:xsi in <dax__adag>");} dax__adag_xmlns_c_xsi_isset = 1; ENTER(VALUE1); BUFFERSET(AX_dax__adag_xmlns_c_xsi);
- YY_BREAK
+ YY_BREAK
case 21:
/* rule 21 can match eol */
YY_RULE_SETUP
if (dax__adag_xmlns_c_xsi_isset != 0) {FAIL("Multiple definition of attribute xmlns:xsi in <dax__adag>");} dax__adag_xmlns_c_xsi_isset = 1; ENTER(VALUE2); BUFFERSET(AX_dax__adag_xmlns_c_xsi);
- YY_BREAK
+ YY_BREAK
case 22:
/* rule 22 can match eol */
YY_RULE_SETUP
if (dax__adag_xsi_c_schemaLocation_isset != 0) {FAIL("Multiple definition of attribute xsi:schemaLocation in <dax__adag>");} dax__adag_xsi_c_schemaLocation_isset = 1; ENTER(VALUE1); BUFFERSET(AX_dax__adag_xsi_c_schemaLocation);
- YY_BREAK
+ YY_BREAK
case 23:
/* rule 23 can match eol */
YY_RULE_SETUP
if (dax__adag_xsi_c_schemaLocation_isset != 0) {FAIL("Multiple definition of attribute xsi:schemaLocation in <dax__adag>");} dax__adag_xsi_c_schemaLocation_isset = 1; ENTER(VALUE2); BUFFERSET(AX_dax__adag_xsi_c_schemaLocation);
- YY_BREAK
+ YY_BREAK
case 24:
/* rule 24 can match eol */
YY_RULE_SETUP
if (dax__adag_version_isset != 0) {FAIL("Multiple definition of attribute version in <dax__adag>");} dax__adag_version_isset = 1; ENTER(VALUE1); BUFFERSET(AX_dax__adag_version);
- YY_BREAK
+ YY_BREAK
case 25:
/* rule 25 can match eol */
YY_RULE_SETUP
if (dax__adag_version_isset != 0) {FAIL("Multiple definition of attribute version in <dax__adag>");} dax__adag_version_isset = 1; ENTER(VALUE2); BUFFERSET(AX_dax__adag_version);
- YY_BREAK
+ YY_BREAK
case 26:
/* rule 26 can match eol */
YY_RULE_SETUP
if (dax__adag_count_isset != 0) {FAIL("Multiple definition of attribute count in <dax__adag>");} dax__adag_count_isset = 1; ENTER(VALUE1); BUFFERSET(AX_dax__adag_count);
- YY_BREAK
+ YY_BREAK
case 27:
/* rule 27 can match eol */
YY_RULE_SETUP
if (dax__adag_count_isset != 0) {FAIL("Multiple definition of attribute count in <dax__adag>");} dax__adag_count_isset = 1; ENTER(VALUE2); BUFFERSET(AX_dax__adag_count);
- YY_BREAK
+ YY_BREAK
case 28:
/* rule 28 can match eol */
YY_RULE_SETUP
if (dax__adag_index_isset != 0) {FAIL("Multiple definition of attribute index in <dax__adag>");} dax__adag_index_isset = 1; ENTER(VALUE1); BUFFERSET(AX_dax__adag_index);
- YY_BREAK
+ YY_BREAK
case 29:
/* rule 29 can match eol */
YY_RULE_SETUP
if (dax__adag_index_isset != 0) {FAIL("Multiple definition of attribute index in <dax__adag>");} dax__adag_index_isset = 1; ENTER(VALUE2); BUFFERSET(AX_dax__adag_index);
- YY_BREAK
+ YY_BREAK
case 30:
/* rule 30 can match eol */
YY_RULE_SETUP
if (dax__adag_name_isset != 0) {FAIL("Multiple definition of attribute name in <dax__adag>");} dax__adag_name_isset = 1; ENTER(VALUE1); BUFFERSET(AX_dax__adag_name);
- YY_BREAK
+ YY_BREAK
case 31:
/* rule 31 can match eol */
YY_RULE_SETUP
if (dax__adag_name_isset != 0) {FAIL("Multiple definition of attribute name in <dax__adag>");} dax__adag_name_isset = 1; ENTER(VALUE2); BUFFERSET(AX_dax__adag_name);
- YY_BREAK
+ YY_BREAK
case 32:
/* rule 32 can match eol */
YY_RULE_SETUP
if (dax__adag_jobCount_isset != 0) {FAIL("Multiple definition of attribute jobCount in <dax__adag>");} dax__adag_jobCount_isset = 1; ENTER(VALUE1); BUFFERSET(AX_dax__adag_jobCount);
- YY_BREAK
+ YY_BREAK
case 33:
/* rule 33 can match eol */
YY_RULE_SETUP
if (dax__adag_jobCount_isset != 0) {FAIL("Multiple definition of attribute jobCount in <dax__adag>");} dax__adag_jobCount_isset = 1; ENTER(VALUE2); BUFFERSET(AX_dax__adag_jobCount);
- YY_BREAK
+ YY_BREAK
case 34:
/* rule 34 can match eol */
YY_RULE_SETUP
if (dax__adag_fileCount_isset != 0) {FAIL("Multiple definition of attribute fileCount in <dax__adag>");} dax__adag_fileCount_isset = 1; ENTER(VALUE1); BUFFERSET(AX_dax__adag_fileCount);
- YY_BREAK
+ YY_BREAK
case 35:
/* rule 35 can match eol */
YY_RULE_SETUP
if (dax__adag_fileCount_isset != 0) {FAIL("Multiple definition of attribute fileCount in <dax__adag>");} dax__adag_fileCount_isset = 1; ENTER(VALUE2); BUFFERSET(AX_dax__adag_fileCount);
- YY_BREAK
+ YY_BREAK
case 36:
/* rule 36 can match eol */
YY_RULE_SETUP
if (dax__adag_childCount_isset != 0) {FAIL("Multiple definition of attribute childCount in <dax__adag>");} dax__adag_childCount_isset = 1; ENTER(VALUE1); BUFFERSET(AX_dax__adag_childCount);
- YY_BREAK
+ YY_BREAK
case 37:
/* rule 37 can match eol */
YY_RULE_SETUP
if (dax__adag_childCount_isset != 0) {FAIL("Multiple definition of attribute childCount in <dax__adag>");} dax__adag_childCount_isset = 1; ENTER(VALUE2); BUFFERSET(AX_dax__adag_childCount);
- YY_BREAK
+ YY_BREAK
case 38:
YY_RULE_SETUP
{
LEAVE; STag_dax__adag();dax__pcdata_ix = 0; ENTER(S_dax__adag);
}
- YY_BREAK
+ YY_BREAK
case 39:
YY_RULE_SETUP
{
case ROOT_dax__adag: SET(EPILOG); break;
}
}
- YY_BREAK
+ YY_BREAK
case 40:
YY_RULE_SETUP
FAIL("Unexpected character `%c' in attribute list of adag element.", dax_text[0]);
- YY_BREAK
+ YY_BREAK
case 41:
YY_RULE_SETUP
FAIL("Bad attribute `%s' in `adag' element start tag.",dax_text);
- YY_BREAK
+ YY_BREAK
case YY_STATE_EOF(AL_dax__adag):
FAIL("EOF in attribute list of `adag' element.");
- YY_BREAK
+ YY_BREAK
case 42:
/* rule 42 can match eol */
case ROOT_dax__adag: SET(EPILOG); break;
}
}
- YY_BREAK
+ YY_BREAK
case 43:
/* rule 43 can match eol */
YY_RULE_SETUP
FAIL("Unexpected end-tag `%s': `</adag>' expected.",dax_text);
- YY_BREAK
+ YY_BREAK
case 44:
YY_RULE_SETUP
FAIL("Unexpected character `%c': `</adag>' expected.",dax_text[0]);
- YY_BREAK
+ YY_BREAK
case YY_STATE_EOF(S_dax__adag_1):
case YY_STATE_EOF(S_dax__adag_5):
case YY_STATE_EOF(E_dax__adag):
case YY_STATE_EOF(S_dax__adag_3):
case YY_STATE_EOF(S_dax__adag):
FAIL("Premature EOF: `</adag>' expected.");
- YY_BREAK
+ YY_BREAK
case 45:
/* rule 45 can match eol */
YY_RULE_SETUP
FAIL("Starting tag <job> is not allowed here.");
- YY_BREAK
+ YY_BREAK
case 46:
/* rule 46 can match eol */
YY_RULE_SETUP
dax__job_level_isset = 0;
ENTER(AL_dax__job); pushbuffer(0);
}
- YY_BREAK
+ YY_BREAK
case 47:
/* rule 47 can match eol */
YY_RULE_SETUP
if (dax__job_id_isset != 0) {FAIL("Multiple definition of attribute id in <dax__job>");} dax__job_id_isset = 1; ENTER(VALUE1); BUFFERSET(AX_dax__job_id);
- YY_BREAK
+ YY_BREAK
case 48:
/* rule 48 can match eol */
YY_RULE_SETUP
if (dax__job_id_isset != 0) {FAIL("Multiple definition of attribute id in <dax__job>");} dax__job_id_isset = 1; ENTER(VALUE2); BUFFERSET(AX_dax__job_id);
- YY_BREAK
+ YY_BREAK
case 49:
/* rule 49 can match eol */
YY_RULE_SETUP
if (dax__job_namespace_isset != 0) {FAIL("Multiple definition of attribute namespace in <dax__job>");} dax__job_namespace_isset = 1; ENTER(VALUE1); BUFFERSET(AX_dax__job_namespace);
- YY_BREAK
+ YY_BREAK
case 50:
/* rule 50 can match eol */
YY_RULE_SETUP
if (dax__job_namespace_isset != 0) {FAIL("Multiple definition of attribute namespace in <dax__job>");} dax__job_namespace_isset = 1; ENTER(VALUE2); BUFFERSET(AX_dax__job_namespace);
- YY_BREAK
+ YY_BREAK
case 51:
/* rule 51 can match eol */
YY_RULE_SETUP
if (dax__job_name_isset != 0) {FAIL("Multiple definition of attribute name in <dax__job>");} dax__job_name_isset = 1; ENTER(VALUE1); BUFFERSET(AX_dax__job_name);
- YY_BREAK
+ YY_BREAK
case 52:
/* rule 52 can match eol */
YY_RULE_SETUP
if (dax__job_name_isset != 0) {FAIL("Multiple definition of attribute name in <dax__job>");} dax__job_name_isset = 1; ENTER(VALUE2); BUFFERSET(AX_dax__job_name);
- YY_BREAK
+ YY_BREAK
case 53:
/* rule 53 can match eol */
YY_RULE_SETUP
if (dax__job_version_isset != 0) {FAIL("Multiple definition of attribute version in <dax__job>");} dax__job_version_isset = 1; ENTER(VALUE1); BUFFERSET(AX_dax__job_version);
- YY_BREAK
+ YY_BREAK
case 54:
/* rule 54 can match eol */
YY_RULE_SETUP
if (dax__job_version_isset != 0) {FAIL("Multiple definition of attribute version in <dax__job>");} dax__job_version_isset = 1; ENTER(VALUE2); BUFFERSET(AX_dax__job_version);
- YY_BREAK
+ YY_BREAK
case 55:
/* rule 55 can match eol */
YY_RULE_SETUP
if (dax__job_runtime_isset != 0) {FAIL("Multiple definition of attribute runtime in <dax__job>");} dax__job_runtime_isset = 1; ENTER(VALUE1); BUFFERSET(AX_dax__job_runtime);
- YY_BREAK
+ YY_BREAK
case 56:
/* rule 56 can match eol */
YY_RULE_SETUP
if (dax__job_runtime_isset != 0) {FAIL("Multiple definition of attribute runtime in <dax__job>");} dax__job_runtime_isset = 1; ENTER(VALUE2); BUFFERSET(AX_dax__job_runtime);
- YY_BREAK
+ YY_BREAK
case 57:
/* rule 57 can match eol */
YY_RULE_SETUP
if (dax__job_level_isset != 0) {FAIL("Multiple definition of attribute level in <dax__job>");} dax__job_level_isset = 1; ENTER(VALUE1); BUFFERSET(AX_dax__job_level);
- YY_BREAK
+ YY_BREAK
case 58:
/* rule 58 can match eol */
YY_RULE_SETUP
if (dax__job_level_isset != 0) {FAIL("Multiple definition of attribute level in <dax__job>");} dax__job_level_isset = 1; ENTER(VALUE2); BUFFERSET(AX_dax__job_level);
- YY_BREAK
+ YY_BREAK
case 59:
YY_RULE_SETUP
{
if (!AX_dax__job_runtime) FAIL("Required attribute `runtime' not set for `job' element.");
LEAVE; STag_dax__job();dax__pcdata_ix = 0; ENTER(S_dax__job);
}
- YY_BREAK
+ YY_BREAK
case 60:
YY_RULE_SETUP
{
case S_dax__adag_2: case S_dax__adag_3: case S_dax__adag: SET(S_dax__adag_3); break;
}
}
- YY_BREAK
+ YY_BREAK
case 61:
YY_RULE_SETUP
FAIL("Unexpected character `%c' in attribute list of job element.", dax_text[0]);
- YY_BREAK
+ YY_BREAK
case 62:
YY_RULE_SETUP
FAIL("Bad attribute `%s' in `job' element start tag.",dax_text);
- YY_BREAK
+ YY_BREAK
case YY_STATE_EOF(AL_dax__job):
FAIL("EOF in attribute list of `job' element.");
- YY_BREAK
+ YY_BREAK
case 63:
/* rule 63 can match eol */
case S_dax__adag_2: case S_dax__adag_3: case S_dax__adag: SET(S_dax__adag_3); break;
}
}
- YY_BREAK
+ YY_BREAK
case 64:
/* rule 64 can match eol */
YY_RULE_SETUP
FAIL("Unexpected end-tag `%s': `</job>' expected.",dax_text);
- YY_BREAK
+ YY_BREAK
case 65:
YY_RULE_SETUP
FAIL("Unexpected character `%c': `</job>' expected.",dax_text[0]);
- YY_BREAK
+ YY_BREAK
case YY_STATE_EOF(S_dax__job):
case YY_STATE_EOF(E_dax__job):
case YY_STATE_EOF(S_dax__job_2):
FAIL("Premature EOF: `</job>' expected.");
- YY_BREAK
+ YY_BREAK
/* <!-- ignored -->
* <!-- ignored --> */
/* rule 66 can match eol */
YY_RULE_SETUP
FAIL("Starting tag <uses> is not allowed here.");
- YY_BREAK
+ YY_BREAK
case 67:
/* rule 67 can match eol */
YY_RULE_SETUP
dax__uses_size_isset = 0;
ENTER(AL_dax__uses); pushbuffer(0);
}
- YY_BREAK
+ YY_BREAK
case 68:
/* rule 68 can match eol */
YY_RULE_SETUP
if (dax__uses_file_isset != 0) {FAIL("Multiple definition of attribute file in <dax__uses>");} dax__uses_file_isset = 1; ENTER(VALUE1); BUFFERSET(AX_dax__uses_file);
- YY_BREAK
+ YY_BREAK
case 69:
/* rule 69 can match eol */
YY_RULE_SETUP
if (dax__uses_file_isset != 0) {FAIL("Multiple definition of attribute file in <dax__uses>");} dax__uses_file_isset = 1; ENTER(VALUE2); BUFFERSET(AX_dax__uses_file);
- YY_BREAK
+ YY_BREAK
case 70:
/* rule 70 can match eol */
case 71:
/* rule 71 can match eol */
YY_RULE_SETUP
A_dax__uses_link = A_dax__uses_link_input;
- YY_BREAK
+ YY_BREAK
case 72:
/* rule 72 can match eol */
case 73:
/* rule 73 can match eol */
YY_RULE_SETUP
A_dax__uses_link = A_dax__uses_link_output;
- YY_BREAK
+ YY_BREAK
case 74:
/* rule 74 can match eol */
case 75:
/* rule 75 can match eol */
YY_RULE_SETUP
A_dax__uses_register = A_dax__uses_register_false;
- YY_BREAK
+ YY_BREAK
case 76:
/* rule 76 can match eol */
case 77:
/* rule 77 can match eol */
YY_RULE_SETUP
A_dax__uses_register = A_dax__uses_register_true;
- YY_BREAK
+ YY_BREAK
case 78:
/* rule 78 can match eol */
case 79:
/* rule 79 can match eol */
YY_RULE_SETUP
A_dax__uses_transfer = A_dax__uses_transfer_false;
- YY_BREAK
+ YY_BREAK
case 80:
/* rule 80 can match eol */
case 81:
/* rule 81 can match eol */
YY_RULE_SETUP
A_dax__uses_transfer = A_dax__uses_transfer_true;
- YY_BREAK
+ YY_BREAK
case 82:
/* rule 82 can match eol */
case 83:
/* rule 83 can match eol */
YY_RULE_SETUP
A_dax__uses_optional = A_dax__uses_optional_false;
- YY_BREAK
+ YY_BREAK
case 84:
/* rule 84 can match eol */
case 85:
/* rule 85 can match eol */
YY_RULE_SETUP
A_dax__uses_optional = A_dax__uses_optional_true;
- YY_BREAK
+ YY_BREAK
case 86:
/* rule 86 can match eol */
YY_RULE_SETUP
if (dax__uses_type_isset != 0) {FAIL("Multiple definition of attribute type in <dax__uses>");} dax__uses_type_isset = 1; ENTER(VALUE1); BUFFERSET(AX_dax__uses_type);
- YY_BREAK
+ YY_BREAK
case 87:
/* rule 87 can match eol */
YY_RULE_SETUP
if (dax__uses_type_isset != 0) {FAIL("Multiple definition of attribute type in <dax__uses>");} dax__uses_type_isset = 1; ENTER(VALUE2); BUFFERSET(AX_dax__uses_type);
- YY_BREAK
+ YY_BREAK
case 88:
/* rule 88 can match eol */
YY_RULE_SETUP
if (dax__uses_size_isset != 0) {FAIL("Multiple definition of attribute size in <dax__uses>");} dax__uses_size_isset = 1; ENTER(VALUE1); BUFFERSET(AX_dax__uses_size);
- YY_BREAK
+ YY_BREAK
case 89:
/* rule 89 can match eol */
YY_RULE_SETUP
if (dax__uses_size_isset != 0) {FAIL("Multiple definition of attribute size in <dax__uses>");} dax__uses_size_isset = 1; ENTER(VALUE2); BUFFERSET(AX_dax__uses_size);
- YY_BREAK
+ YY_BREAK
case 90:
YY_RULE_SETUP
{
if (!AX_dax__uses_size) FAIL("Required attribute `size' not set for `uses' element.");
LEAVE; STag_dax__uses();dax__pcdata_ix = 0; ENTER(E_dax__uses);
}
- YY_BREAK
+ YY_BREAK
case 91:
YY_RULE_SETUP
{
case S_dax__job: case S_dax__job_2: case S_dax__job_1: SET(S_dax__job_2); break;
}
}
- YY_BREAK
+ YY_BREAK
case 92:
YY_RULE_SETUP
FAIL("Unexpected character `%c' in attribute list of uses element.", dax_text[0]);
- YY_BREAK
+ YY_BREAK
case 93:
YY_RULE_SETUP
FAIL("Bad attribute `%s' in `uses' element start tag.",dax_text);
- YY_BREAK
+ YY_BREAK
case YY_STATE_EOF(AL_dax__uses):
FAIL("EOF in attribute list of `uses' element.");
- YY_BREAK
+ YY_BREAK
case 94:
/* rule 94 can match eol */
case S_dax__job: case S_dax__job_2: case S_dax__job_1: SET(S_dax__job_2); break;
}
}
- YY_BREAK
+ YY_BREAK
case 95:
/* rule 95 can match eol */
YY_RULE_SETUP
FAIL("Unexpected end-tag `%s': `</uses>' expected.",dax_text);
- YY_BREAK
+ YY_BREAK
case 96:
YY_RULE_SETUP
FAIL("Unexpected character `%c': `</uses>' expected.",dax_text[0]);
- YY_BREAK
+ YY_BREAK
case YY_STATE_EOF(E_dax__uses):
FAIL("Premature EOF: `</uses>' expected.");
- YY_BREAK
+ YY_BREAK
case 97:
/* rule 97 can match eol */
YY_RULE_SETUP
FAIL("Starting tag <child> is not allowed here.");
- YY_BREAK
+ YY_BREAK
case 98:
/* rule 98 can match eol */
YY_RULE_SETUP
dax__child_ref_isset = 0;
ENTER(AL_dax__child); pushbuffer(0);
}
- YY_BREAK
+ YY_BREAK
case 99:
/* rule 99 can match eol */
YY_RULE_SETUP
if (dax__child_ref_isset != 0) {FAIL("Multiple definition of attribute ref in <dax__child>");} dax__child_ref_isset = 1; ENTER(VALUE1); BUFFERSET(AX_dax__child_ref);
- YY_BREAK
+ YY_BREAK
case 100:
/* rule 100 can match eol */
YY_RULE_SETUP
if (dax__child_ref_isset != 0) {FAIL("Multiple definition of attribute ref in <dax__child>");} dax__child_ref_isset = 1; ENTER(VALUE2); BUFFERSET(AX_dax__child_ref);
- YY_BREAK
+ YY_BREAK
case 101:
YY_RULE_SETUP
{
if (!AX_dax__child_ref) FAIL("Required attribute `ref' not set for `child' element.");
LEAVE; STag_dax__child();dax__pcdata_ix = 0; ENTER(S_dax__child);
}
- YY_BREAK
+ YY_BREAK
case 102:
YY_RULE_SETUP
{
case S_dax__adag_1: case S_dax__adag_4: case S_dax__adag_5: case S_dax__adag_3: case S_dax__adag: SET(S_dax__adag_5); break;
}
}
- YY_BREAK
+ YY_BREAK
case 103:
YY_RULE_SETUP
FAIL("Unexpected character `%c' in attribute list of child element.", dax_text[0]);
- YY_BREAK
+ YY_BREAK
case 104:
YY_RULE_SETUP
FAIL("Bad attribute `%s' in `child' element start tag.",dax_text);
- YY_BREAK
+ YY_BREAK
case YY_STATE_EOF(AL_dax__child):
FAIL("EOF in attribute list of `child' element.");
- YY_BREAK
+ YY_BREAK
case 105:
/* rule 105 can match eol */
case S_dax__adag_1: case S_dax__adag_4: case S_dax__adag_5: case S_dax__adag_3: case S_dax__adag: SET(S_dax__adag_5); break;
}
}
- YY_BREAK
+ YY_BREAK
case 106:
/* rule 106 can match eol */
YY_RULE_SETUP
FAIL("Unexpected end-tag `%s': `</child>' expected.",dax_text);
- YY_BREAK
+ YY_BREAK
case 107:
YY_RULE_SETUP
FAIL("Unexpected character `%c': `</child>' expected.",dax_text[0]);
- YY_BREAK
+ YY_BREAK
case YY_STATE_EOF(S_dax__child_2):
case YY_STATE_EOF(E_dax__child):
case YY_STATE_EOF(S_dax__child):
FAIL("Premature EOF: `</child>' expected.");
- YY_BREAK
+ YY_BREAK
case 108:
/* rule 108 can match eol */
YY_RULE_SETUP
FAIL("Starting tag <parent> is not allowed here.");
- YY_BREAK
+ YY_BREAK
case 109:
/* rule 109 can match eol */
YY_RULE_SETUP
dax__parent_ref_isset = 0;
ENTER(AL_dax__parent); pushbuffer(0);
}
- YY_BREAK
+ YY_BREAK
case 110:
/* rule 110 can match eol */
YY_RULE_SETUP
if (dax__parent_ref_isset != 0) {FAIL("Multiple definition of attribute ref in <dax__parent>");} dax__parent_ref_isset = 1; ENTER(VALUE1); BUFFERSET(AX_dax__parent_ref);
- YY_BREAK
+ YY_BREAK
case 111:
/* rule 111 can match eol */
YY_RULE_SETUP
if (dax__parent_ref_isset != 0) {FAIL("Multiple definition of attribute ref in <dax__parent>");} dax__parent_ref_isset = 1; ENTER(VALUE2); BUFFERSET(AX_dax__parent_ref);
- YY_BREAK
+ YY_BREAK
case 112:
YY_RULE_SETUP
{
if (!AX_dax__parent_ref) FAIL("Required attribute `ref' not set for `parent' element.");
LEAVE; STag_dax__parent();dax__pcdata_ix = 0; ENTER(E_dax__parent);
}
- YY_BREAK
+ YY_BREAK
case 113:
YY_RULE_SETUP
{
case S_dax__child_2: case S_dax__child: case S_dax__child_1: SET(S_dax__child_2); break;
}
}
- YY_BREAK
+ YY_BREAK
case 114:
YY_RULE_SETUP
FAIL("Unexpected character `%c' in attribute list of parent element.", dax_text[0]);
- YY_BREAK
+ YY_BREAK
case 115:
YY_RULE_SETUP
FAIL("Bad attribute `%s' in `parent' element start tag.",dax_text);
- YY_BREAK
+ YY_BREAK
case YY_STATE_EOF(AL_dax__parent):
FAIL("EOF in attribute list of `parent' element.");
- YY_BREAK
+ YY_BREAK
case 116:
/* rule 116 can match eol */
case S_dax__child_2: case S_dax__child: case S_dax__child_1: SET(S_dax__child_2); break;
}
}
- YY_BREAK
+ YY_BREAK
case 117:
/* rule 117 can match eol */
YY_RULE_SETUP
FAIL("Unexpected end-tag `%s': `</parent>' expected.",dax_text);
- YY_BREAK
+ YY_BREAK
case 118:
YY_RULE_SETUP
FAIL("Unexpected character `%c': `</parent>' expected.",dax_text[0]);
- YY_BREAK
+ YY_BREAK
case YY_STATE_EOF(E_dax__parent):
FAIL("Premature EOF: `</parent>' expected.");
- YY_BREAK
+ YY_BREAK
/* EPILOG: after the root element. */
case 119:
YY_RULE_SETUP
{SET(PROLOG); yyless(0); CLEANUP; return -1;}
- YY_BREAK
+ YY_BREAK
case YY_STATE_EOF(EPILOG):
SUCCEED;
- YY_BREAK
+ YY_BREAK
/* CHARACTER DATA. */
case 120:
YY_RULE_SETUP
BUFFERPUTC('&');
- YY_BREAK
+ YY_BREAK
case 121:
YY_RULE_SETUP
BUFFERPUTC('<');
- YY_BREAK
+ YY_BREAK
case 122:
YY_RULE_SETUP
BUFFERPUTC('>');
- YY_BREAK
+ YY_BREAK
case 123:
YY_RULE_SETUP
BUFFERPUTC('\'');
- YY_BREAK
+ YY_BREAK
case 124:
YY_RULE_SETUP
BUFFERPUTC('"');
- YY_BREAK
+ YY_BREAK
/* Character entities. */
case 125:
YY_RULE_SETUP
BUFFERPUTC((unsigned char)atoi(dax_text+2));
- YY_BREAK
+ YY_BREAK
case 126:
YY_RULE_SETUP
BUFFERPUTC((unsigned char)strtol(dax_text+3,NULL,16));
- YY_BREAK
+ YY_BREAK
case 127:
/* rule 127 can match eol */
/* rule 130 can match eol */
YY_RULE_SETUP
BUFFERPUTC('\n');
- YY_BREAK
+ YY_BREAK
case 131:
YY_RULE_SETUP
ENTER(CDATA);
- YY_BREAK
+ YY_BREAK
case 132:
YY_RULE_SETUP
FAIL("Unexpected `]""]>' in character data.");
- YY_BREAK
+ YY_BREAK
case 133:
YY_RULE_SETUP
BUFFERDONE; LEAVE;
- YY_BREAK
+ YY_BREAK
case YY_STATE_EOF(VALUE1):
FAIL("EOF in literal (\"'\" expected).");
- YY_BREAK
+ YY_BREAK
case 134:
YY_RULE_SETUP
BUFFERDONE; LEAVE;
- YY_BREAK
+ YY_BREAK
case YY_STATE_EOF(VALUE2):
FAIL("EOF in literal (`\"' expected).");
- YY_BREAK
+ YY_BREAK
case 135:
/* rule 135 can match eol */
YY_RULE_SETUP
BUFFERPUTC(dax_text[0]);
- YY_BREAK
+ YY_BREAK
case 136:
YY_RULE_SETUP
FAIL("Spurious `%c' in character data.",dax_text[0]);
- YY_BREAK
+ YY_BREAK
case 137:
YY_RULE_SETUP
LEAVE;
- YY_BREAK
-/* "]""]" BUFFERPUTC(dax_text[0]); BUFFERPUTC(dax_text[1]); */
+ YY_BREAK
+/* "]""]" BUFFERPUTC(dax_text[0]); BUFFERPUTC(dax_text[1]); */
case 138:
YY_RULE_SETUP
BUFFERPUTC(dax_text[0]);
- YY_BREAK
+ YY_BREAK
case YY_STATE_EOF(CDATA):
FAIL("EOF in CDATA section.");
- YY_BREAK
+ YY_BREAK
/* Impossible rules to avoid warnings from flex(1). */
/* Ideally, this should be replaced by code in flexml.pl that
/* rule 139 can match eol */
YY_RULE_SETUP
FAIL("Syntax error on character `%c'.", dax_text[0]);
- YY_BREAK
+ YY_BREAK
case 140:
YY_RULE_SETUP
ECHO;
- YY_BREAK
+ YY_BREAK
case YY_STATE_EOF(INITIAL):
case YY_STATE_EOF(ROOT_dax__adag):
case YY_STATE_EOF(S_dax__adag_2):
case YY_STATE_EOF(S_dax__job_1):
case YY_STATE_EOF(S_dax__child_1):
case YY_STATE_EOF(IMPOSSIBLE):
- yyterminate();
-
- case YY_END_OF_BUFFER:
- {
- /* Amount of text matched not including the EOB char. */
- int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1;
-
- /* Undo the effects of YY_DO_BEFORE_ACTION. */
- *yy_cp = (yy_hold_char);
- YY_RESTORE_YY_MORE_OFFSET
-
- if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW )
- {
- /* We're scanning a new file or input source. It's
- * possible that this happened because the user
- * just pointed dax_in at a new source and called
- * dax_lex(). If so, then we have to assure
- * consistency between YY_CURRENT_BUFFER and our
- * globals. Here is the right place to do so, because
- * this is the first action (other than possibly a
- * back-up) that will match for the new input source.
- */
- (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
- YY_CURRENT_BUFFER_LVALUE->yy_input_file = dax_in;
- YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL;
- }
-
- /* Note that here we test for yy_c_buf_p "<=" to the position
- * of the first EOB in the buffer, since yy_c_buf_p will
- * already have been incremented past the NUL character
- * (since all states make transitions on EOB to the
- * end-of-buffer state). Contrast this with the test
- * in input().
- */
- if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
- { /* This was really a NUL. */
- yy_state_type yy_next_state;
-
- (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text;
-
- yy_current_state = yy_get_previous_state( );
-
- /* Okay, we're now positioned to make the NUL
- * transition. We couldn't have
- * yy_get_previous_state() go ahead and do it
- * for us because it doesn't know how to deal
- * with the possibility of jamming (and we don't
- * want to build jamming into it because then it
- * will run more slowly).
- */
-
- yy_next_state = yy_try_NUL_trans( yy_current_state );
-
- yy_bp = (yytext_ptr) + YY_MORE_ADJ;
-
- if ( yy_next_state )
- {
- /* Consume the NUL. */
- yy_cp = ++(yy_c_buf_p);
- yy_current_state = yy_next_state;
- goto yy_match;
- }
-
- else
- {
- yy_cp = (yy_c_buf_p);
- goto yy_find_action;
- }
- }
-
- else switch ( yy_get_next_buffer( ) )
- {
- case EOB_ACT_END_OF_FILE:
- {
- (yy_did_buffer_switch_on_eof) = 0;
-
- if ( dax_wrap( ) )
- {
- /* Note: because we've taken care in
- * yy_get_next_buffer() to have set up
- * dax_text, we can now set up
- * yy_c_buf_p so that if some total
- * hoser (like flex itself) wants to
- * call the scanner after we return the
- * YY_NULL, it'll still work - another
- * YY_NULL will get returned.
- */
- (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ;
-
- yy_act = YY_STATE_EOF(YY_START);
- goto do_action;
- }
-
- else
- {
- if ( ! (yy_did_buffer_switch_on_eof) )
- YY_NEW_FILE;
- }
- break;
- }
-
- case EOB_ACT_CONTINUE_SCAN:
- (yy_c_buf_p) =
- (yytext_ptr) + yy_amount_of_matched_text;
-
- yy_current_state = yy_get_previous_state( );
-
- yy_cp = (yy_c_buf_p);
- yy_bp = (yytext_ptr) + YY_MORE_ADJ;
- goto yy_match;
-
- case EOB_ACT_LAST_MATCH:
- (yy_c_buf_p) =
- &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)];
-
- yy_current_state = yy_get_previous_state( );
-
- yy_cp = (yy_c_buf_p);
- yy_bp = (yytext_ptr) + YY_MORE_ADJ;
- goto yy_find_action;
- }
- break;
- }
-
- default:
- YY_FATAL_ERROR(
- "fatal flex scanner internal error--no action found" );
- } /* end of action switch */
- } /* end of scanning one token */
+ yyterminate();
+
+ case YY_END_OF_BUFFER:
+ {
+ /* Amount of text matched not including the EOB char. */
+ int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1;
+
+ /* Undo the effects of YY_DO_BEFORE_ACTION. */
+ *yy_cp = (yy_hold_char);
+ YY_RESTORE_YY_MORE_OFFSET
+
+ if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW )
+ {
+ /* We're scanning a new file or input source. It's
+ * possible that this happened because the user
+ * just pointed dax_in at a new source and called
+ * dax_lex(). If so, then we have to assure
+ * consistency between YY_CURRENT_BUFFER and our
+ * globals. Here is the right place to do so, because
+ * this is the first action (other than possibly a
+ * back-up) that will match for the new input source.
+ */
+ (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
+ YY_CURRENT_BUFFER_LVALUE->yy_input_file = dax_in;
+ YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL;
+ }
+
+ /* Note that here we test for yy_c_buf_p "<=" to the position
+ * of the first EOB in the buffer, since yy_c_buf_p will
+ * already have been incremented past the NUL character
+ * (since all states make transitions on EOB to the
+ * end-of-buffer state). Contrast this with the test
+ * in input().
+ */
+ if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
+ { /* This was really a NUL. */
+ yy_state_type yy_next_state;
+
+ (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text;
+
+ yy_current_state = yy_get_previous_state( );
+
+ /* Okay, we're now positioned to make the NUL
+ * transition. We couldn't have
+ * yy_get_previous_state() go ahead and do it
+ * for us because it doesn't know how to deal
+ * with the possibility of jamming (and we don't
+ * want to build jamming into it because then it
+ * will run more slowly).
+ */
+
+ yy_next_state = yy_try_NUL_trans( yy_current_state );
+
+ yy_bp = (yytext_ptr) + YY_MORE_ADJ;
+
+ if ( yy_next_state )
+ {
+ /* Consume the NUL. */
+ yy_cp = ++(yy_c_buf_p);
+ yy_current_state = yy_next_state;
+ goto yy_match;
+ }
+
+ else
+ {
+ yy_cp = (yy_c_buf_p);
+ goto yy_find_action;
+ }
+ }
+
+ else switch ( yy_get_next_buffer( ) )
+ {
+ case EOB_ACT_END_OF_FILE:
+ {
+ (yy_did_buffer_switch_on_eof) = 0;
+
+ if ( dax_wrap( ) )
+ {
+ /* Note: because we've taken care in
+ * yy_get_next_buffer() to have set up
+ * dax_text, we can now set up
+ * yy_c_buf_p so that if some total
+ * hoser (like flex itself) wants to
+ * call the scanner after we return the
+ * YY_NULL, it'll still work - another
+ * YY_NULL will get returned.
+ */
+ (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ;
+
+ yy_act = YY_STATE_EOF(YY_START);
+ goto do_action;
+ }
+
+ else
+ {
+ if ( ! (yy_did_buffer_switch_on_eof) )
+ YY_NEW_FILE;
+ }
+ break;
+ }
+
+ case EOB_ACT_CONTINUE_SCAN:
+ (yy_c_buf_p) =
+ (yytext_ptr) + yy_amount_of_matched_text;
+
+ yy_current_state = yy_get_previous_state( );
+
+ yy_cp = (yy_c_buf_p);
+ yy_bp = (yytext_ptr) + YY_MORE_ADJ;
+ goto yy_match;
+
+ case EOB_ACT_LAST_MATCH:
+ (yy_c_buf_p) =
+ &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)];
+
+ yy_current_state = yy_get_previous_state( );
+
+ yy_cp = (yy_c_buf_p);
+ yy_bp = (yytext_ptr) + YY_MORE_ADJ;
+ goto yy_find_action;
+ }
+ break;
+ }
+
+ default:
+ YY_FATAL_ERROR(
+ "fatal flex scanner internal error--no action found" );
+ } /* end of action switch */
+ } /* end of scanning one token */
} /* end of dax_lex */
/* yy_get_next_buffer - try to read in a new buffer
*
* Returns a code representing an action:
- * EOB_ACT_LAST_MATCH -
- * EOB_ACT_CONTINUE_SCAN - continue scanning from current position
- * EOB_ACT_END_OF_FILE - end of file
+ * EOB_ACT_LAST_MATCH -
+ * EOB_ACT_CONTINUE_SCAN - continue scanning from current position
+ * EOB_ACT_END_OF_FILE - end of file
*/
static int yy_get_next_buffer (void)
{
- register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf;
- register char *source = (yytext_ptr);
- register int number_to_move, i;
- int ret_val;
-
- if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] )
- YY_FATAL_ERROR(
- "fatal flex scanner internal error--end of buffer missed" );
-
- if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 )
- { /* Don't try to fill the buffer, so this is an EOF. */
- if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 )
- {
- /* We matched a single character, the EOB, so
- * treat this as a final EOF.
- */
- return EOB_ACT_END_OF_FILE;
- }
-
- else
- {
- /* We matched some text prior to the EOB, first
- * process it.
- */
- return EOB_ACT_LAST_MATCH;
- }
- }
-
- /* Try to read more data. */
-
- /* First move last chars to start of buffer. */
- number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1;
-
- for ( i = 0; i < number_to_move; ++i )
- *(dest++) = *(source++);
-
- if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING )
- /* don't do the read, it's not guaranteed to return an EOF,
- * just force an EOF
- */
- YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0;
-
- else
- {
- int num_to_read =
- YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1;
-
- while ( num_to_read <= 0 )
- { /* Not enough room in the buffer - grow it. */
-
- /* just a shorter name for the current buffer */
- YY_BUFFER_STATE b = YY_CURRENT_BUFFER;
-
- int yy_c_buf_p_offset =
- (int) ((yy_c_buf_p) - b->yy_ch_buf);
-
- if ( b->yy_is_our_buffer )
- {
- int new_size = b->yy_buf_size * 2;
-
- if ( new_size <= 0 )
- b->yy_buf_size += b->yy_buf_size / 8;
- else
- b->yy_buf_size *= 2;
-
- b->yy_ch_buf = (char *)
- /* Include room in for 2 EOB chars. */
- dax_realloc((void *) b->yy_ch_buf,b->yy_buf_size + 2 );
- }
- else
- /* Can't grow it, we don't own it. */
- b->yy_ch_buf = 0;
-
- if ( ! b->yy_ch_buf )
- YY_FATAL_ERROR(
- "fatal error - scanner input buffer overflow" );
-
- (yy_c_buf_p) = &b->yy_ch_buf[yy_c_buf_p_offset];
-
- num_to_read = YY_CURRENT_BUFFER_LVALUE->yy_buf_size -
- number_to_move - 1;
-
- }
-
- if ( num_to_read > YY_READ_BUF_SIZE )
- num_to_read = YY_READ_BUF_SIZE;
-
- /* Read in more data. */
- YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]),
- (yy_n_chars), (size_t) num_to_read );
+ register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf;
+ register char *source = (yytext_ptr);
+ register int number_to_move, i;
+ int ret_val;
+
+ if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] )
+ YY_FATAL_ERROR(
+ "fatal flex scanner internal error--end of buffer missed" );
+
+ if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 )
+ { /* Don't try to fill the buffer, so this is an EOF. */
+ if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 )
+ {
+ /* We matched a single character, the EOB, so
+ * treat this as a final EOF.
+ */
+ return EOB_ACT_END_OF_FILE;
+ }
+
+ else
+ {
+ /* We matched some text prior to the EOB, first
+ * process it.
+ */
+ return EOB_ACT_LAST_MATCH;
+ }
+ }
+
+ /* Try to read more data. */
+
+ /* First move last chars to start of buffer. */
+ number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1;
+
+ for ( i = 0; i < number_to_move; ++i )
+ *(dest++) = *(source++);
+
+ if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING )
+ /* don't do the read, it's not guaranteed to return an EOF,
+ * just force an EOF
+ */
+ YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0;
+
+ else
+ {
+ int num_to_read =
+ YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1;
+
+ while ( num_to_read <= 0 )
+ { /* Not enough room in the buffer - grow it. */
+
+ /* just a shorter name for the current buffer */
+ YY_BUFFER_STATE b = YY_CURRENT_BUFFER;
+
+ int yy_c_buf_p_offset =
+ (int) ((yy_c_buf_p) - b->yy_ch_buf);
+
+ if ( b->yy_is_our_buffer )
+ {
+ int new_size = b->yy_buf_size * 2;
+
+ if ( new_size <= 0 )
+ b->yy_buf_size += b->yy_buf_size / 8;
+ else
+ b->yy_buf_size *= 2;
+
+ b->yy_ch_buf = (char *)
+ /* Include room in for 2 EOB chars. */
+ dax_realloc((void *) b->yy_ch_buf,b->yy_buf_size + 2 );
+ }
+ else
+ /* Can't grow it, we don't own it. */
+ b->yy_ch_buf = 0;
+
+ if ( ! b->yy_ch_buf )
+ YY_FATAL_ERROR(
+ "fatal error - scanner input buffer overflow" );
+
+ (yy_c_buf_p) = &b->yy_ch_buf[yy_c_buf_p_offset];
+
+ num_to_read = YY_CURRENT_BUFFER_LVALUE->yy_buf_size -
+ number_to_move - 1;
+
+ }
+
+ if ( num_to_read > YY_READ_BUF_SIZE )
+ num_to_read = YY_READ_BUF_SIZE;
+
+ /* Read in more data. */
+ YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]),
+ (yy_n_chars), (size_t) num_to_read );
+
+ YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
+ }
+
+ if ( (yy_n_chars) == 0 )
+ {
+ if ( number_to_move == YY_MORE_ADJ )
+ {
+ ret_val = EOB_ACT_END_OF_FILE;
+ dax_restart(dax_in );
+ }
+
+ else
+ {
+ ret_val = EOB_ACT_LAST_MATCH;
+ YY_CURRENT_BUFFER_LVALUE->yy_buffer_status =
+ YY_BUFFER_EOF_PENDING;
+ }
+ }
+
+ else
+ ret_val = EOB_ACT_CONTINUE_SCAN;
+
+ if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) {
+ /* Extend the array by 50%, plus the number we really need. */
+ yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1);
+ YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) dax_realloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size );
+ if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
+ YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" );
+ }
+
+ (yy_n_chars) += number_to_move;
+ YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
+ YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;
+
+ (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0];
- YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
- }
-
- if ( (yy_n_chars) == 0 )
- {
- if ( number_to_move == YY_MORE_ADJ )
- {
- ret_val = EOB_ACT_END_OF_FILE;
- dax_restart(dax_in );
- }
-
- else
- {
- ret_val = EOB_ACT_LAST_MATCH;
- YY_CURRENT_BUFFER_LVALUE->yy_buffer_status =
- YY_BUFFER_EOF_PENDING;
- }
- }
-
- else
- ret_val = EOB_ACT_CONTINUE_SCAN;
-
- if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) {
- /* Extend the array by 50%, plus the number we really need. */
- yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1);
- YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) dax_realloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size );
- if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
- YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" );
- }
-
- (yy_n_chars) += number_to_move;
- YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
- YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;
-
- (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0];
-
- return ret_val;
+ return ret_val;
}
/* yy_get_previous_state - get the state just before the EOB char was reached */
static yy_state_type yy_get_previous_state (void)
{
- register yy_state_type yy_current_state;
- register char *yy_cp;
+ register yy_state_type yy_current_state;
+ register char *yy_cp;
- yy_current_state = (yy_start);
-
- for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp )
- {
- register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1);
- if ( yy_accept[yy_current_state] )
- {
- (yy_last_accepting_state) = yy_current_state;
- (yy_last_accepting_cpos) = yy_cp;
- }
- while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
- {
- yy_current_state = (int) yy_def[yy_current_state];
- if ( yy_current_state >= 775 )
- yy_c = yy_meta[(unsigned int) yy_c];
- }
- yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
- }
-
- return yy_current_state;
+ yy_current_state = (yy_start);
+
+ for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp )
+ {
+ register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1);
+ if ( yy_accept[yy_current_state] )
+ {
+ (yy_last_accepting_state) = yy_current_state;
+ (yy_last_accepting_cpos) = yy_cp;
+ }
+ while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
+ {
+ yy_current_state = (int) yy_def[yy_current_state];
+ if ( yy_current_state >= 775 )
+ yy_c = yy_meta[(unsigned int) yy_c];
+ }
+ yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
+ }
+
+ return yy_current_state;
}
/* yy_try_NUL_trans - try to make a transition on the NUL character
*
* synopsis
- * next_state = yy_try_NUL_trans( current_state );
+ * next_state = yy_try_NUL_trans( current_state );
*/
static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state )
{
- register int yy_is_jam;
- register char *yy_cp = (yy_c_buf_p);
-
- register YY_CHAR yy_c = 1;
- if ( yy_accept[yy_current_state] )
- {
- (yy_last_accepting_state) = yy_current_state;
- (yy_last_accepting_cpos) = yy_cp;
- }
- while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
- {
- yy_current_state = (int) yy_def[yy_current_state];
- if ( yy_current_state >= 775 )
- yy_c = yy_meta[(unsigned int) yy_c];
- }
- yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
- yy_is_jam = (yy_current_state == 774);
-
- return yy_is_jam ? 0 : yy_current_state;
+ register int yy_is_jam;
+ register char *yy_cp = (yy_c_buf_p);
+
+ register YY_CHAR yy_c = 1;
+ if ( yy_accept[yy_current_state] )
+ {
+ (yy_last_accepting_state) = yy_current_state;
+ (yy_last_accepting_cpos) = yy_cp;
+ }
+ while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
+ {
+ yy_current_state = (int) yy_def[yy_current_state];
+ if ( yy_current_state >= 775 )
+ yy_c = yy_meta[(unsigned int) yy_c];
+ }
+ yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
+ yy_is_jam = (yy_current_state == 774);
+
+ return yy_is_jam ? 0 : yy_current_state;
}
#ifndef YY_NO_INPUT
#endif
{
- int c;
+ int c;
- *(yy_c_buf_p) = (yy_hold_char);
-
- if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR )
- {
- /* yy_c_buf_p now points to the character we want to return.
- * If this occurs *before* the EOB characters, then it's a
- * valid NUL; if not, then we've hit the end of the buffer.
- */
- if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
- /* This was really a NUL. */
- *(yy_c_buf_p) = '\0';
-
- else
- { /* need more input */
- int offset = (yy_c_buf_p) - (yytext_ptr);
- ++(yy_c_buf_p);
-
- switch ( yy_get_next_buffer( ) )
- {
- case EOB_ACT_LAST_MATCH:
- /* This happens because yy_g_n_b()
- * sees that we've accumulated a
- * token and flags that we need to
- * try matching the token before
- * proceeding. But for input(),
- * there's no matching to consider.
- * So convert the EOB_ACT_LAST_MATCH
- * to EOB_ACT_END_OF_FILE.
- */
-
- /* Reset buffer status. */
- dax_restart(dax_in );
-
- /*FALLTHROUGH*/
-
- case EOB_ACT_END_OF_FILE:
- {
- if ( dax_wrap( ) )
- return EOF;
-
- if ( ! (yy_did_buffer_switch_on_eof) )
- YY_NEW_FILE;
+ *(yy_c_buf_p) = (yy_hold_char);
+
+ if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR )
+ {
+ /* yy_c_buf_p now points to the character we want to return.
+ * If this occurs *before* the EOB characters, then it's a
+ * valid NUL; if not, then we've hit the end of the buffer.
+ */
+ if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
+ /* This was really a NUL. */
+ *(yy_c_buf_p) = '\0';
+
+ else
+ { /* need more input */
+ int offset = (yy_c_buf_p) - (yytext_ptr);
+ ++(yy_c_buf_p);
+
+ switch ( yy_get_next_buffer( ) )
+ {
+ case EOB_ACT_LAST_MATCH:
+ /* This happens because yy_g_n_b()
+ * sees that we've accumulated a
+ * token and flags that we need to
+ * try matching the token before
+ * proceeding. But for input(),
+ * there's no matching to consider.
+ * So convert the EOB_ACT_LAST_MATCH
+ * to EOB_ACT_END_OF_FILE.
+ */
+
+ /* Reset buffer status. */
+ dax_restart(dax_in );
+
+ /*FALLTHROUGH*/
+
+ case EOB_ACT_END_OF_FILE:
+ {
+ if ( dax_wrap( ) )
+ return EOF;
+
+ if ( ! (yy_did_buffer_switch_on_eof) )
+ YY_NEW_FILE;
#ifdef __cplusplus
- return yyinput();
+ return yyinput();
#else
- return input();
+ return input();
#endif
- }
+ }
- case EOB_ACT_CONTINUE_SCAN:
- (yy_c_buf_p) = (yytext_ptr) + offset;
- break;
- }
- }
- }
+ case EOB_ACT_CONTINUE_SCAN:
+ (yy_c_buf_p) = (yytext_ptr) + offset;
+ break;
+ }
+ }
+ }
- c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */
- *(yy_c_buf_p) = '\0'; /* preserve dax_text */
- (yy_hold_char) = *++(yy_c_buf_p);
+ c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */
+ *(yy_c_buf_p) = '\0'; /* preserve dax_text */
+ (yy_hold_char) = *++(yy_c_buf_p);
- if ( c == '\n' )
-
+ if ( c == '\n' )
+
dax_lineno++;
;
- return c;
+ return c;
}
-#endif /* ifndef YY_NO_INPUT */
+#endif /* ifndef YY_NO_INPUT */
/** Immediately switch to a different input stream.
* @param input_file A readable stream.
void dax_restart (FILE * input_file )
{
- if ( ! YY_CURRENT_BUFFER ){
+ if ( ! YY_CURRENT_BUFFER ){
dax_ensure_buffer_stack ();
- YY_CURRENT_BUFFER_LVALUE =
+ YY_CURRENT_BUFFER_LVALUE =
dax__create_buffer(dax_in,YY_BUF_SIZE );
- }
+ }
- dax__init_buffer(YY_CURRENT_BUFFER,input_file );
- dax__load_buffer_state( );
+ dax__init_buffer(YY_CURRENT_BUFFER,input_file );
+ dax__load_buffer_state( );
}
/** Switch to a different input buffer.
void dax__switch_to_buffer (YY_BUFFER_STATE new_buffer )
{
- /* TODO. We should be able to replace this entire function body
- * with
- * dax_pop_buffer_state();
- * dax_push_buffer_state(new_buffer);
+ /* TODO. We should be able to replace this entire function body
+ * with
+ * dax_pop_buffer_state();
+ * dax_push_buffer_state(new_buffer);
*/
- dax_ensure_buffer_stack ();
- if ( YY_CURRENT_BUFFER == new_buffer )
- return;
-
- if ( YY_CURRENT_BUFFER )
- {
- /* Flush out information for old buffer. */
- *(yy_c_buf_p) = (yy_hold_char);
- YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
- YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
- }
-
- YY_CURRENT_BUFFER_LVALUE = new_buffer;
- dax__load_buffer_state( );
-
- /* We don't actually know whether we did this switch during
- * EOF (dax_wrap()) processing, but the only time this flag
- * is looked at is after dax_wrap() is called, so it's safe
- * to go ahead and always set it.
- */
- (yy_did_buffer_switch_on_eof) = 1;
+ dax_ensure_buffer_stack ();
+ if ( YY_CURRENT_BUFFER == new_buffer )
+ return;
+
+ if ( YY_CURRENT_BUFFER )
+ {
+ /* Flush out information for old buffer. */
+ *(yy_c_buf_p) = (yy_hold_char);
+ YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
+ YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
+ }
+
+ YY_CURRENT_BUFFER_LVALUE = new_buffer;
+ dax__load_buffer_state( );
+
+ /* We don't actually know whether we did this switch during
+ * EOF (dax_wrap()) processing, but the only time this flag
+ * is looked at is after dax_wrap() is called, so it's safe
+ * to go ahead and always set it.
+ */
+ (yy_did_buffer_switch_on_eof) = 1;
}
static void dax__load_buffer_state (void)
{
- (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
- (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos;
- dax_in = YY_CURRENT_BUFFER_LVALUE->yy_input_file;
- (yy_hold_char) = *(yy_c_buf_p);
+ (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
+ (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos;
+ dax_in = YY_CURRENT_BUFFER_LVALUE->yy_input_file;
+ (yy_hold_char) = *(yy_c_buf_p);
}
/** Allocate and initialize an input buffer state.
*/
YY_BUFFER_STATE dax__create_buffer (FILE * file, int size )
{
- YY_BUFFER_STATE b;
+ YY_BUFFER_STATE b;
- b = (YY_BUFFER_STATE) dax_alloc(sizeof( struct yy_buffer_state ) );
- if ( ! b )
- YY_FATAL_ERROR( "out of dynamic memory in dax__create_buffer()" );
+ b = (YY_BUFFER_STATE) dax_alloc(sizeof( struct yy_buffer_state ) );
+ if ( ! b )
+ YY_FATAL_ERROR( "out of dynamic memory in dax__create_buffer()" );
- b->yy_buf_size = size;
+ b->yy_buf_size = size;
- /* yy_ch_buf has to be 2 characters longer than the size given because
- * we need to put in 2 end-of-buffer characters.
- */
- b->yy_ch_buf = (char *) dax_alloc(b->yy_buf_size + 2 );
- if ( ! b->yy_ch_buf )
- YY_FATAL_ERROR( "out of dynamic memory in dax__create_buffer()" );
+ /* yy_ch_buf has to be 2 characters longer than the size given because
+ * we need to put in 2 end-of-buffer characters.
+ */
+ b->yy_ch_buf = (char *) dax_alloc(b->yy_buf_size + 2 );
+ if ( ! b->yy_ch_buf )
+ YY_FATAL_ERROR( "out of dynamic memory in dax__create_buffer()" );
- b->yy_is_our_buffer = 1;
+ b->yy_is_our_buffer = 1;
- dax__init_buffer(b,file );
+ dax__init_buffer(b,file );
- return b;
+ return b;
}
/** Destroy the buffer.
void dax__delete_buffer (YY_BUFFER_STATE b )
{
- if ( ! b )
- return;
+ if ( ! b )
+ return;
- if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */
- YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0;
+ if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */
+ YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0;
- if ( b->yy_is_our_buffer )
- dax_free((void *) b->yy_ch_buf );
+ if ( b->yy_is_our_buffer )
+ dax_free((void *) b->yy_ch_buf );
- dax_free((void *) b );
+ dax_free((void *) b );
}
#ifndef __cplusplus
static void dax__init_buffer (YY_BUFFER_STATE b, FILE * file )
{
- int oerrno = errno;
+ int oerrno = errno;
- dax__flush_buffer(b );
+ dax__flush_buffer(b );
- b->yy_input_file = file;
- b->yy_fill_buffer = 1;
+ b->yy_input_file = file;
+ b->yy_fill_buffer = 1;
/* If b is the current buffer, then dax__init_buffer was _probably_
* called from dax_restart() or through yy_get_next_buffer.
b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0;
- errno = oerrno;
+ errno = oerrno;
}
/** Discard all buffered characters. On the next scan, YY_INPUT will be called.
*/
void dax__flush_buffer (YY_BUFFER_STATE b )
{
- if ( ! b )
- return;
+ if ( ! b )
+ return;
- b->yy_n_chars = 0;
+ b->yy_n_chars = 0;
- /* We always need two end-of-buffer characters. The first causes
- * a transition to the end-of-buffer state. The second causes
- * a jam in that state.
- */
- b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR;
- b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR;
+ /* We always need two end-of-buffer characters. The first causes
+ * a transition to the end-of-buffer state. The second causes
+ * a jam in that state.
+ */
+ b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR;
+ b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR;
- b->yy_buf_pos = &b->yy_ch_buf[0];
+ b->yy_buf_pos = &b->yy_ch_buf[0];
- b->yy_at_bol = 1;
- b->yy_buffer_status = YY_BUFFER_NEW;
+ b->yy_at_bol = 1;
+ b->yy_buffer_status = YY_BUFFER_NEW;
- if ( b == YY_CURRENT_BUFFER )
- dax__load_buffer_state( );
+ if ( b == YY_CURRENT_BUFFER )
+ dax__load_buffer_state( );
}
/** Pushes the new state onto the stack. The new state becomes
*/
void dax_push_buffer_state (YY_BUFFER_STATE new_buffer )
{
- if (new_buffer == NULL)
- return;
+ if (new_buffer == NULL)
+ return;
- dax_ensure_buffer_stack();
+ dax_ensure_buffer_stack();
- /* This block is copied from dax__switch_to_buffer. */
- if ( YY_CURRENT_BUFFER )
- {
- /* Flush out information for old buffer. */
- *(yy_c_buf_p) = (yy_hold_char);
- YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
- YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
- }
+ /* This block is copied from dax__switch_to_buffer. */
+ if ( YY_CURRENT_BUFFER )
+ {
+ /* Flush out information for old buffer. */
+ *(yy_c_buf_p) = (yy_hold_char);
+ YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
+ YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
+ }
- /* Only push if top exists. Otherwise, replace top. */
- if (YY_CURRENT_BUFFER)
- (yy_buffer_stack_top)++;
- YY_CURRENT_BUFFER_LVALUE = new_buffer;
+ /* Only push if top exists. Otherwise, replace top. */
+ if (YY_CURRENT_BUFFER)
+ (yy_buffer_stack_top)++;
+ YY_CURRENT_BUFFER_LVALUE = new_buffer;
- /* copied from dax__switch_to_buffer. */
- dax__load_buffer_state( );
- (yy_did_buffer_switch_on_eof) = 1;
+ /* copied from dax__switch_to_buffer. */
+ dax__load_buffer_state( );
+ (yy_did_buffer_switch_on_eof) = 1;
}
/** Removes and deletes the top of the stack, if present.
*/
void dax_pop_buffer_state (void)
{
- if (!YY_CURRENT_BUFFER)
- return;
+ if (!YY_CURRENT_BUFFER)
+ return;
- dax__delete_buffer(YY_CURRENT_BUFFER );
- YY_CURRENT_BUFFER_LVALUE = NULL;
- if ((yy_buffer_stack_top) > 0)
- --(yy_buffer_stack_top);
+ dax__delete_buffer(YY_CURRENT_BUFFER );
+ YY_CURRENT_BUFFER_LVALUE = NULL;
+ if ((yy_buffer_stack_top) > 0)
+ --(yy_buffer_stack_top);
- if (YY_CURRENT_BUFFER) {
- dax__load_buffer_state( );
- (yy_did_buffer_switch_on_eof) = 1;
- }
+ if (YY_CURRENT_BUFFER) {
+ dax__load_buffer_state( );
+ (yy_did_buffer_switch_on_eof) = 1;
+ }
}
/* Allocates the stack if it does not exist.
*/
static void dax_ensure_buffer_stack (void)
{
- int num_to_alloc;
+ int num_to_alloc;
- if (!(yy_buffer_stack)) {
+ if (!(yy_buffer_stack)) {
- /* First allocation is just for 2 elements, since we don't know if this
- * scanner will even need a stack. We use 2 instead of 1 to avoid an
- * immediate realloc on the next call.
+ /* First allocation is just for 2 elements, since we don't know if this
+ * scanner will even need a stack. We use 2 instead of 1 to avoid an
+ * immediate realloc on the next call.
*/
- num_to_alloc = 1;
- (yy_buffer_stack) = (struct yy_buffer_state**)dax_alloc
- (num_to_alloc * sizeof(struct yy_buffer_state*)
- );
- if ( ! (yy_buffer_stack) )
- YY_FATAL_ERROR( "out of dynamic memory in dax_ensure_buffer_stack()" );
-
- memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
-
- (yy_buffer_stack_max) = num_to_alloc;
- (yy_buffer_stack_top) = 0;
- return;
- }
-
- if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){
-
- /* Increase the buffer to prepare for a possible push. */
- int grow_size = 8 /* arbitrary grow size */;
-
- num_to_alloc = (yy_buffer_stack_max) + grow_size;
- (yy_buffer_stack) = (struct yy_buffer_state**)dax_realloc
- ((yy_buffer_stack),
- num_to_alloc * sizeof(struct yy_buffer_state*)
- );
- if ( ! (yy_buffer_stack) )
- YY_FATAL_ERROR( "out of dynamic memory in dax_ensure_buffer_stack()" );
-
- /* zero only the new slots.*/
- memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*));
- (yy_buffer_stack_max) = num_to_alloc;
- }
+ num_to_alloc = 1;
+ (yy_buffer_stack) = (struct yy_buffer_state**)dax_alloc
+ (num_to_alloc * sizeof(struct yy_buffer_state*)
+ );
+ if ( ! (yy_buffer_stack) )
+ YY_FATAL_ERROR( "out of dynamic memory in dax_ensure_buffer_stack()" );
+
+ memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
+
+ (yy_buffer_stack_max) = num_to_alloc;
+ (yy_buffer_stack_top) = 0;
+ return;
+ }
+
+ if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){
+
+ /* Increase the buffer to prepare for a possible push. */
+ int grow_size = 8 /* arbitrary grow size */;
+
+ num_to_alloc = (yy_buffer_stack_max) + grow_size;
+ (yy_buffer_stack) = (struct yy_buffer_state**)dax_realloc
+ ((yy_buffer_stack),
+ num_to_alloc * sizeof(struct yy_buffer_state*)
+ );
+ if ( ! (yy_buffer_stack) )
+ YY_FATAL_ERROR( "out of dynamic memory in dax_ensure_buffer_stack()" );
+
+ /* zero only the new slots.*/
+ memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*));
+ (yy_buffer_stack_max) = num_to_alloc;
+ }
}
/** Setup the input buffer state to scan directly from a user-specified character buffer.
*/
YY_BUFFER_STATE dax__scan_buffer (char * base, yy_size_t size )
{
- YY_BUFFER_STATE b;
+ YY_BUFFER_STATE b;
- if ( size < 2 ||
- base[size-2] != YY_END_OF_BUFFER_CHAR ||
- base[size-1] != YY_END_OF_BUFFER_CHAR )
- /* They forgot to leave room for the EOB's. */
- return 0;
-
- b = (YY_BUFFER_STATE) dax_alloc(sizeof( struct yy_buffer_state ) );
- if ( ! b )
- YY_FATAL_ERROR( "out of dynamic memory in dax__scan_buffer()" );
-
- b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */
- b->yy_buf_pos = b->yy_ch_buf = base;
- b->yy_is_our_buffer = 0;
- b->yy_input_file = 0;
- b->yy_n_chars = b->yy_buf_size;
- b->yy_is_interactive = 0;
- b->yy_at_bol = 1;
- b->yy_fill_buffer = 0;
- b->yy_buffer_status = YY_BUFFER_NEW;
-
- dax__switch_to_buffer(b );
-
- return b;
+ if ( size < 2 ||
+ base[size-2] != YY_END_OF_BUFFER_CHAR ||
+ base[size-1] != YY_END_OF_BUFFER_CHAR )
+ /* They forgot to leave room for the EOB's. */
+ return 0;
+
+ b = (YY_BUFFER_STATE) dax_alloc(sizeof( struct yy_buffer_state ) );
+ if ( ! b )
+ YY_FATAL_ERROR( "out of dynamic memory in dax__scan_buffer()" );
+
+ b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */
+ b->yy_buf_pos = b->yy_ch_buf = base;
+ b->yy_is_our_buffer = 0;
+ b->yy_input_file = 0;
+ b->yy_n_chars = b->yy_buf_size;
+ b->yy_is_interactive = 0;
+ b->yy_at_bol = 1;
+ b->yy_fill_buffer = 0;
+ b->yy_buffer_status = YY_BUFFER_NEW;
+
+ dax__switch_to_buffer(b );
+
+ return b;
}
/** Setup the input buffer state to scan a string. The next call to dax_lex() will
YY_BUFFER_STATE dax__scan_string (yyconst char * yystr )
{
- return dax__scan_bytes(yystr,strlen(yystr) );
+ return dax__scan_bytes(yystr,strlen(yystr) );
}
/** Setup the input buffer state to scan the given bytes. The next call to dax_lex() will
*/
YY_BUFFER_STATE dax__scan_bytes (yyconst char * yybytes, int _yybytes_len )
{
- YY_BUFFER_STATE b;
- char *buf;
- yy_size_t n;
- int i;
+ YY_BUFFER_STATE b;
+ char *buf;
+ yy_size_t n;
+ int i;
- /* Get memory for full buffer, including space for trailing EOB's. */
- n = _yybytes_len + 2;
- buf = (char *) dax_alloc(n );
- if ( ! buf )
- YY_FATAL_ERROR( "out of dynamic memory in dax__scan_bytes()" );
+ /* Get memory for full buffer, including space for trailing EOB's. */
+ n = _yybytes_len + 2;
+ buf = (char *) dax_alloc(n );
+ if ( ! buf )
+ YY_FATAL_ERROR( "out of dynamic memory in dax__scan_bytes()" );
- for ( i = 0; i < _yybytes_len; ++i )
- buf[i] = yybytes[i];
+ for ( i = 0; i < _yybytes_len; ++i )
+ buf[i] = yybytes[i];
- buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR;
+ buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR;
- b = dax__scan_buffer(buf,n );
- if ( ! b )
- YY_FATAL_ERROR( "bad buffer in dax__scan_bytes()" );
+ b = dax__scan_buffer(buf,n );
+ if ( ! b )
+ YY_FATAL_ERROR( "bad buffer in dax__scan_bytes()" );
- /* It's okay to grow etc. this buffer, and we should throw it
- * away when we're done.
- */
- b->yy_is_our_buffer = 1;
+ /* It's okay to grow etc. this buffer, and we should throw it
+ * away when we're done.
+ */
+ b->yy_is_our_buffer = 1;
- return b;
+ return b;
}
static void yy_push_state (int new_state )
{
- if ( (yy_start_stack_ptr) >= (yy_start_stack_depth) )
- {
- yy_size_t new_size;
+ if ( (yy_start_stack_ptr) >= (yy_start_stack_depth) )
+ {
+ yy_size_t new_size;
- (yy_start_stack_depth) += YY_START_STACK_INCR;
- new_size = (yy_start_stack_depth) * sizeof( int );
+ (yy_start_stack_depth) += YY_START_STACK_INCR;
+ new_size = (yy_start_stack_depth) * sizeof( int );
- if ( ! (yy_start_stack) )
- (yy_start_stack) = (int *) dax_alloc(new_size );
+ if ( ! (yy_start_stack) )
+ (yy_start_stack) = (int *) dax_alloc(new_size );
- else
- (yy_start_stack) = (int *) dax_realloc((void *) (yy_start_stack),new_size );
+ else
+ (yy_start_stack) = (int *) dax_realloc((void *) (yy_start_stack),new_size );
- if ( ! (yy_start_stack) )
- YY_FATAL_ERROR( "out of memory expanding start-condition stack" );
- }
+ if ( ! (yy_start_stack) )
+ YY_FATAL_ERROR( "out of memory expanding start-condition stack" );
+ }
- (yy_start_stack)[(yy_start_stack_ptr)++] = YY_START;
+ (yy_start_stack)[(yy_start_stack_ptr)++] = YY_START;
- BEGIN(new_state);
+ BEGIN(new_state);
}
static void yy_pop_state (void)
{
- if ( --(yy_start_stack_ptr) < 0 )
- YY_FATAL_ERROR( "start-condition stack underflow" );
+ if ( --(yy_start_stack_ptr) < 0 )
+ YY_FATAL_ERROR( "start-condition stack underflow" );
- BEGIN((yy_start_stack)[(yy_start_stack_ptr)]);
+ BEGIN((yy_start_stack)[(yy_start_stack_ptr)]);
}
#ifndef YY_EXIT_FAILURE
static void yy_fatal_error (yyconst char* msg )
{
- (void) fprintf( stderr, "%s\n", msg );
- exit( YY_EXIT_FAILURE );
+ (void) fprintf( stderr, "%s\n", msg );
+ exit( YY_EXIT_FAILURE );
}
/* Redefine yyless() so it works in section 3 code. */
#undef yyless
#define yyless(n) \
- do \
- { \
- /* Undo effects of setting up dax_text. */ \
+ do \
+ { \
+ /* Undo effects of setting up dax_text. */ \
int yyless_macro_arg = (n); \
YY_LESS_LINENO(yyless_macro_arg);\
- dax_text[dax_leng] = (yy_hold_char); \
- (yy_c_buf_p) = dax_text + yyless_macro_arg; \
- (yy_hold_char) = *(yy_c_buf_p); \
- *(yy_c_buf_p) = '\0'; \
- dax_leng = yyless_macro_arg; \
- } \
- while ( 0 )
+ dax_text[dax_leng] = (yy_hold_char); \
+ (yy_c_buf_p) = dax_text + yyless_macro_arg; \
+ (yy_hold_char) = *(yy_c_buf_p); \
+ *(yy_c_buf_p) = '\0'; \
+ dax_leng = yyless_macro_arg; \
+ } \
+ while ( 0 )
/* Accessor methods (get/set functions) to struct members. */
{
/* Pop the buffer stack, destroying each element. */
- while(YY_CURRENT_BUFFER){
- dax__delete_buffer(YY_CURRENT_BUFFER );
- YY_CURRENT_BUFFER_LVALUE = NULL;
- dax_pop_buffer_state();
- }
+ while(YY_CURRENT_BUFFER){
+ dax__delete_buffer(YY_CURRENT_BUFFER );
+ YY_CURRENT_BUFFER_LVALUE = NULL;
+ dax_pop_buffer_state();
+ }
- /* Destroy the stack itself. */
- dax_free((yy_buffer_stack) );
- (yy_buffer_stack) = NULL;
+ /* Destroy the stack itself. */
+ dax_free((yy_buffer_stack) );
+ (yy_buffer_stack) = NULL;
/* Destroy the start condition stack. */
dax_free((yy_start_stack) );
#ifndef yytext_ptr
static void yy_flex_strncpy (char* s1, yyconst char * s2, int n )
{
- register int i;
- for ( i = 0; i < n; ++i )
- s1[i] = s2[i];
+ register int i;
+ for ( i = 0; i < n; ++i )
+ s1[i] = s2[i];
}
#endif
#ifdef YY_NEED_STRLEN
static int yy_flex_strlen (yyconst char * s )
{
- register int n;
- for ( n = 0; s[n]; ++n )
- ;
+ register int n;
+ for ( n = 0; s[n]; ++n )
+ ;
- return n;
+ return n;
}
#endif
void *dax_alloc (yy_size_t size )
{
- return (void *) malloc( size );
+ return (void *) malloc( size );
}
void *dax_realloc (void * ptr, yy_size_t size )
{
- /* The cast to (char *) in the following accommodates both
- * implementations that use char* generic pointers, and those
- * that use void* generic pointers. It works with the latter
- * because both ANSI C and C++ allow castless assignment from
- * any pointer type to void*, and deal with argument conversions
- * as though doing an assignment.
- */
- return (void *) realloc( (char *) ptr, size );
+ /* The cast to (char *) in the following accommodates both
+ * implementations that use char* generic pointers, and those
+ * that use void* generic pointers. It works with the latter
+ * because both ANSI C and C++ allow castless assignment from
+ * any pointer type to void*, and deal with argument conversions
+ * as though doing an assignment.
+ */
+ return (void *) realloc( (char *) ptr, size );
}
void dax_free (void * ptr )
{
- free( (char *) ptr ); /* see dax_realloc() for (char *) cast */
+ free( (char *) ptr ); /* see dax_realloc() for (char *) cast */
}
#define YYTABLES_NAME "yytables"
int dax__element_context(int i)
{
return (0<i && i<yy_start_stack_depth
- ? yy_start_stack[yy_start_stack_ptr - i]
- : 0);
+ ? yy_start_stack[yy_start_stack_ptr - i]
+ : 0);
}
#ifdef FLEX_DEBUG
static void debug_leave(void) {
if (dax__flex_debug) {
print_yy_stack("--LEAVE : ");
- print_dax__bufferstack();
+ print_dax__bufferstack();
}
yy_pop_state();
}
{
if (dax__statenames) {
free(dax__statenames);
- dax__statenames = NULL;
+ dax__statenames = NULL;
}
free(dax__bufferstack);
dax__bufferstack = NULL;
va_list ap; va_start(ap, fmt);
#ifdef FLEXML_yylineno
used = sprintf(flexml_err_msg,
- "Invalid XML (XML input line %d, state %d): ",
- dax_lineno, YY_START);
+ "Invalid XML (XML input line %d, state %d): ",
+ dax_lineno, YY_START);
#else
used = sprintf(flexml_err_msg,
- "Invalid XML (state %d): ",
- YY_START);
+ "Invalid XML (state %d): ",
+ YY_START);
#endif
chars_left = flexml_max_err_msg_size - used - 1;
vsnprintf(flexml_err_msg + used, chars_left, fmt, ap);
