+++ /dev/null
-/*! \page pls Packet level simulation
-
-It is possible to use a packet-level network simulator
-instead of the default flow-based simulation. You may want to use such
-an approach if you have doubts about the validity of the default model
-or if you want to perform some validation experiments. At the moment,
-we support the GTNetS simulator and since version 3.6.2, ns-3.
-
-
-\section pls_simgrid_configuration_gtnets Using GTNetS
-
-
-<i>
-To enable GTNetS model inside SimGrid it is needed to patch the GTNetS simulator source code
-and build/install it from scratch
-</i>
-
- - <b>Download and enter the recent downloaded GTNetS directory</b>
-
-\verbatim
-svn checkout svn://scm.gforge.inria.fr/svn/simgrid/contrib/trunk/GTNetS/
-cd GTNetS
-\endverbatim
-
-
- - <b>Use the following commands to unzip and patch GTNetS package to work within SimGrid.</b>
-
-\verbatim
-unzip gtnets-current.zip
-tar zxvf gtnets-current-patch.tgz
-cd gtnets-current
-cat ../00*.patch | patch -p1
-\endverbatim
-
- - <b>OPTIONALLY</b> you can use a patch for itanium 64bit processor family.
-
-\verbatim
-cat ../AMD64-FATAL-Removed-DUL_SIZE_DIFF-Added-fPIC-compillin.patch | patch -p1
-\endverbatim
-
- - <b>Compile GTNetS</b>
-
- Due to portability issues it is possible that GTNetS does not compile in your architecture. The patches furnished in SimGrid SVN repository are intended for use in Linux architecture only. Unfortunately, we do not have the time, the money, neither the manpower to guarantee GTNetS portability. We advice you to use one of GTNetS communication channel to get more help in compiling GTNetS.
-
-
-\verbatim
-ln -sf Makefile.linux Makefile
-sed -i 's/-fPIC/-fPIC -fpermissive/g' Makefile
-make depend
-make debug
-\endverbatim
-
-
- - <b>NOTE</b> A lot of warnings are expected but the application should compile
- just fine. If the makefile insists in compiling some QT libraries
- please try a make clean before asking for help.
-
-
- - <b>To compile optimized version</b>
-
-\verbatim
-make opt
-\endverbatim
-
-
- - <b>Installing GTNetS</b>
-
- It is important to put the full path of your libgtsim-xxxx.so file when creating the symbolic link. Replace < userhome > by some path you have write access to.
-
-\verbatim
-ln -sf /<absolute_path>/gtnets_current/libgtsim-debug.so /<userhome>/usr/lib/libgtnets.so
-export LD_LIBRARY_PATH=${LD_LIBRARY_PATH:+$LD_LIBRARY_PATH:}/<userhome>/usr/lib/
-mkdir /<userhome>/usr/include/gtnets
-cp -fr SRC/*.h /<userhome>/usr/include/gtnets
-\endverbatim
-
-
- - <b>Enable GTNetS support in SimGrid</b>
-
-In order to enable gtnets with simgrid you have to give where is gtnets. (path to \<gtnets_path\>/lib and \<gtnets_path\>/include)
-
-\verbatim
-cmake . -Denable_gtnets=ON -Dgtnets_path=/<userhome>/usr
-\endverbatim
-
- - <b>Once you have followed all the instructions for compiling and
- installing successfully you can activate this feature at
- runntime with the following options:</b>
-
-\verbatim
-cd simgrid
-make
-ctest -R gtnets
-\endverbatim
-
-
- - <b>Or try the GTNetS model dogbone example with</b>
-
-\verbatim
-gtnets/gtnets gtnets/onelink-p.xml gtnets/onelink-d.xml --cfg=network_model:GTNets
-\endverbatim
-
-
- A long version of this <a href="http://gforge.inria.fr/docman/view.php/12/6283/GTNetS HowTo.html">HowTo</a> it is available
-
-
- More about GTNetS simulator at <a href="http://www.ece.gatech.edu/research/labs/MANIACS/GTNetS/index.html">GTNetS Website</a>
-
-
- - <b>DISCLAIMER</b>
- The patches provided by us worked successfully with GTNetS found
- <a href="http://www.ece.gatech.edu/research/labs/MANIACS/GTNetS/software/gtnets-current.zip">here</a>,
- dated from 12th June 2008. Due to the discontinuing development of
- GTNetS it is impossible to precise a version number. We STRONGLY recommend you
- to download and install the GTNetS version found in SimGrid repository as explained above.
-
-\section pls_simgrid_configuration_ns3 Using NS3
-
-It is possible to use discrete-event network simulator <a href="http://www.nsnam.org/">(ns-3)</a> for Internet systems
-instead of the default one.
-
-A ns-3 platform is created according to the platform file you provide in SimGrid format. However from this configuration, we had to set up some extra parameters :
-
-<ul>
-<li>
-First, whenever possible, we let default ns3 values and we don't changed it ; in case you have doubts on values for those parameters (TCP parameters for example), blame ns-3...
-</li>
-
-<li>
-Second, routing used inside ns-3 is a global and static one, relying on a shortest path algorithm. We did so by using ns3::Ipv4GlobalRoutingHelper::PopulateRoutingTables.
-</li>
-
-<li>
-Third, we also choose to restrict the way your platform is built : end hosts cannot have more than one interface card (so, only one <link> in your SimGrid platform should link
-an end host to the platform ; if not, your end host will be considered as a router.
-</li>
-
-</ul>
-<i>
-To use ns3 model inside SimGrid you have to install at least the version 3.10 of ns3 simulator.
-</i>
-
-- <b>Download and enter the lateast release (here the 3.12.1)</b>
-
-\verbatim
-http://www.nsnam.org/release/ns-allinone-3.12.1.tar.bz2
-tar -xf ns-allinone-3.12.1.tar.bz2
-cd ns-allinone-3.12.1/ns-3.12.1/
-\endverbatim
-
-- <b>Configure, make and install ns3</b>
-
-\verbatim
-./waf configure --prefix="ns-3_install_directory"
-./waf
-./waf install
-\endverbatim
-
-After install ns-3 you should have directories into your "ns-3_install_directory":
- \li include/ns3/
- \li lib/
- \li bin/ (with 3.12)
-
-You also need to add to the LD_LIBRARY_PATH : "ns-3_install_directory/lib".
-
-- <b>Enable ns-3 support on SimGrid</b>
-
-In order to enable ns-3 with simgrid you have to give where is ns-3 to the simgrid configuration command. (path to \<ns3_path\>/lib and \<ns3_path\>/include)
-
-\verbatim
-cmake . -Denable_ns3=ON -Dns3_path=<ns3_path>
-\endverbatim
-
-With the output of the configuration you can see if ns-3 is detected by included the directory to flags.
-
-\verbatim
-Configuration of package `simgrid' on arch (=4):
- BUILDNAME : UNIX
- SITE : Linux_2.6.38-11-generic_x86_64
- Release : simgrid-3.6.1
-
- Compiler: c++ : /usr/bin/c++
- version: 4.6.1
- Compiler: c : /usr/bin/gcc
- version: 4.6.1
-
- CFlags : -O3 -finline-functions -funroll-loops -fno-strict-aliasing -L/usr/lib/x86_64-linux-gnu -I/usr/include
- -L/home/navarrop/Install/ns3-3.10/lib -I/home/navarrop/Install/ns3-3.10/include -g3 -D_NS3_3_10
- CPPFlags: -I/home/navarrop/Install/ns3-3.10/include -L/home/navarrop/Install/ns3-3.10/lib
-
- Compile Gtnets : 0
- Compile NS-3 : 1 ---------------------> Be sure this option is "1" otherwise ns-3 is not activated
- Gtnets path :
- NS-3 path : /home/navarrop/Install/ns3-3.10
- Compile Lua :
- Compile Smpi : OFF
- Compile Static : OFF
- Compile pcre : AUTO
-
- Maintainer mode: OFF
- Supernovae mode: OFF
- Model checking : OFF
- Tracing mode : OFF
- Jedule mode : OFF
- Latency bound : OFF
- Graphviz mode :
-
- Simgrid dependencies: -lm -lpcre -lpthread -lns3 -lrt
- Smpi dependencies :
-
- INSTALL_PREFIX: /usr/local
--- Configuring done
--- Generating done
--- Build files have been written to: /home/navarrop/workspace/simgrid/build
-\endverbatim
-
-Now you can compile SimGrid
-\verbatim
-make
-\endverbatim
-
-Then you can see if ns-3 is well activated by testing
-\verbatim
-ctest -R ns3
-\endverbatim
-
-You should see
-\verbatim
- Start 182: msg-ns3-thread
-1/3 Test #182: msg-ns3-thread ................... Passed 0.35 sec
- Start 183: msg-ns3-ucontext
-2/3 Test #183: msg-ns3-ucontext ................. Passed 0.22 sec
- Start 184: msg-ns3-raw
-3/3 Test #184: msg-ns3-raw ...................... Passed 0.23 sec
-\endverbatim
-
-More about ns-3 simulator <a href="http://www.nsnam.org/">(Official website)</a>
-
-*/
