cmake_minimum_required(VERSION 2.8.8) message(STATUS "Cmake version ${CMAKE_MAJOR_VERSION}.${CMAKE_MINOR_VERSION}.${CMAKE_PATCH_VERSION}") set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${CMAKE_HOME_DIRECTORY}/tools/cmake/Modules) project(SimGrid C CXX) #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Check for the compiler # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# ### Need to set rc ccompiler before enable language if(WIN32) SET(CMAKE_RC_COMPILER "windres") endif() ## ## Check the C/C++ standard that we need ## See also tools/cmake/GCCFlags.cmake that sets our paranoid warning flags INCLUDE(CheckCCompilerFlag) CHECK_C_COMPILER_FLAG(-fstack-cleaner HAVE_C_STACK_CLEANER) ## Request full debugging flags set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -g3") set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -g3") set(CMAKE_Fortran_FLAGS "${CMAKE_Fortran_FLAGS} -g") if (CMAKE_COMPILER_IS_GNUCC) if (CMAKE_CXX_COMPILER_VERSION VERSION_LESS "4.7") message(FATAL_ERROR "SimGrid needs at least g++ version 4.7 to compile but you have ${CMAKE_CXX_COMPILER_VERSION}." "You need a sufficient support of c++11 to compile SimGrid.") endif() endif() ## We need a decent support of the c++11 standard include(CheckCXXCompilerFlag) CHECK_CXX_COMPILER_FLAG("-std=gnu++11" COMPILER_SUPPORTS_CXX11) if(COMPILER_SUPPORTS_CXX11) set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=gnu++11") else() message(FATAL_ERROR "The compiler ${CMAKE_CXX_COMPILER} (v${CMAKE_CXX_COMPILER_VERSION}) has no C++11 support. " "Please use a decent C++ compiler.") endif() ### And we need C11 standard, too include(CheckCCompilerFlag) CHECK_C_COMPILER_FLAG("-std=gnu11" COMPILER_SUPPORTS_C11) if(COMPILER_SUPPORTS_C11) set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -std=gnu11") else() message(FATAL_ERROR "The compiler ${CMAKE_C_COMPILER} (v${CMAKE_C_COMPILER_VERSION}) has no C11 support. " "Please use a decent C compiler " "(note that c++11 support of ${CMAKE_CXX_COMPILER} seems ok).") endif() if(APPLE AND (CMAKE_C_COMPILER_VERSION VERSION_LESS "4.6")) ### gcc 4.[1-5] cannot compile ucontext on OSX message(STATUS "Ucontext can't be used with this version of gcc (must be greater than 4.5)") set(HAVE_UCONTEXT_H 0) endif() ### SMPI vs. Fortran if ((NOT DEFINED enable_smpi OR enable_smpi) AND NOT APPLE) # smpi is enabled by default # Call enable_language(Fortran) in order to load the build rules for this language, needed by # teshsuite/smpi/mpich-test/. Use CMAKE_FORCE_Fortran_COMPILER to bypass checks for a working compiler (smpiff # doesn't exist at configure time). include(CMakeForceCompiler) if(NOT COMMAND CMAKE_FORCE_Fortran_COMPILER) MACRO(CMAKE_FORCE_Fortran_COMPILER compiler id) SET(CMAKE_Fortran_COMPILER "${compiler}") SET(CMAKE_Fortran_COMPILER_ID_RUN TRUE) SET(CMAKE_Fortran_COMPILER_ID ${id}) SET(CMAKE_Fortran_COMPILER_WORKS TRUE) SET(CMAKE_Fortran_COMPILER_FORCED TRUE) # Set old compiler id variables. IF("${CMAKE_Fortran_COMPILER_ID}" MATCHES "GNU") SET(CMAKE_COMPILER_IS_GNUG77 1) ENDIF("${CMAKE_Fortran_COMPILER_ID}" MATCHES "GNU") ENDMACRO(CMAKE_FORCE_Fortran_COMPILER) endif() CMAKE_FORCE_Fortran_COMPILER(smpiff smpiff) enable_language(Fortran OPTIONAL) endif() #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Build the version number # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# set(SIMGRID_VERSION_MAJOR "3") set(SIMGRID_VERSION_MINOR "13") set(SIMGRID_VERSION_PATCH "90") set(SIMGRID_VERSION_EXTRA "-prealpha") # Extra words to add to version string (e.g. -rc1) set(SIMGRID_VERSION_DATE "2016") # Year for copyright information if(${SIMGRID_VERSION_PATCH} EQUAL "0") set(release_version "${SIMGRID_VERSION_MAJOR}.${SIMGRID_VERSION_MINOR}") else() set(release_version "${SIMGRID_VERSION_MAJOR}.${SIMGRID_VERSION_MINOR}.${SIMGRID_VERSION_PATCH}") endif() set(SIMGRID_VERSION_STRING "SimGrid version ${release_version}${SIMGRID_VERSION_EXTRA}") set(libsimgrid_version "${release_version}") set(libsimgrid-java_version "${release_version}") ### SET THE LIBRARY EXTENSION if(APPLE) #MAC set(LIB_EXE "dylib") else() if(WIN32) #WINDOWS set(LIB_EXE "a") set(BIN_EXE ".exe") else() #UNIX set(LIB_EXE "so") endif() endif() execute_process(COMMAND ${CMAKE_LINKER} --version OUTPUT_VARIABLE LINKER_VERSION) string(REGEX MATCH "[0-9].[0-9]*" LINKER_VERSION "${LINKER_VERSION}") ### Find programs and paths FIND_PROGRAM(GCOV_PATH gcov) include(FindPerl) if(NOT PERL_FOUND) message(FATAL_ERROR "Please install Perl to compile SimGrid.") endif() if (APPLE) set(CMAKE_INSTALL_RPATH "${CMAKE_INSTALL_PREFIX}/lib") set(CMAKE_INSTALL_RPATH_USE_LINK_PATH TRUE) endif() SET(LIBRARY_OUTPUT_PATH ${CMAKE_BINARY_DIR}/lib) ### Compute the include paths set(INCLUDES ${CMAKE_HOME_DIRECTORY} ${CMAKE_HOME_DIRECTORY}/include ${CMAKE_HOME_DIRECTORY}/src/include ${CMAKE_BINARY_DIR} ${CMAKE_BINARY_DIR}/include ) if(NOT CMAKE_CROSSCOMPILING AND EXISTS /usr/include/) set(INCLUDES ${INCLUDES} /usr/include/) endif() ### Check 32bits or 64bits IF(CMAKE_SIZEOF_VOID_P EQUAL 4) SET(ARCH_32_BITS 1) ELSE() SET(ARCH_32_BITS 0) ENDIF() if(WIN32) set(CMAKE_INCLUDE_WIN "${CMAKE_C_COMPILER}") set(CMAKE_LIB_WIN "${CMAKE_C_COMPILER}") string(REGEX REPLACE "/bin/gcc.*" "/include" CMAKE_INCLUDE_WIN "${CMAKE_INCLUDE_WIN}") string(REGEX REPLACE "/bin/gcc.*" "/lib" CMAKE_LIB_WIN "${CMAKE_LIB_WIN}") set(INCLUDES ${INCLUDES} ${CMAKE_INCLUDE_WIN}) unset(CMAKE_INCLUDE_WIN) endif() include_directories(${INCLUDES}) ### Setup Options include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Option.cmake) ### Determine the assembly flavor that we need today set(HAVE_RAW_CONTEXTS 0) include(CMakeDetermineSystem) IF(CMAKE_SYSTEM_PROCESSOR MATCHES ".86|AMD64|amd64") IF(${ARCH_32_BITS}) message(STATUS "System processor: i686 (${CMAKE_SYSTEM_PROCESSOR}, 32 bits)") set(PROCESSOR_i686 1) set(PROCESSOR_x86_64 0) ELSE() message(STATUS "System processor: x86_64 (${CMAKE_SYSTEM_PROCESSOR}, 64 bits)") set(PROCESSOR_i686 0) set(PROCESSOR_x86_64 1) ENDIF() if (WIN32) message(STATUS "Disable fast raw contexts on Windows.") else() set(HAVE_RAW_CONTEXTS 1) endif() ELSE() set(PROCESSOR_i686 0) set(PROCESSOR_x86_64 0) ENDIF() include(CheckFunctionExists) include(CheckTypeSize) include(CheckIncludeFile) include(CheckIncludeFiles) include(CheckLibraryExists) include(CheckSymbolExists) set(HAVE_GRAPHVIZ 0) include(FindGraphviz) set(HAVE_LUA 0) if(enable_lua) include(FindLuaSimgrid) endif() set(HAVE_NS3 0) if(enable_ns3) include(FindNS3) if (NOT HAVE_NS3) message(FATAL_ERROR "Cannot find NS3. Please install it (apt-get install ns3 libns3-dev) or disable that cmake option") endif() endif() if(WIN32) set(Boost_USE_STATIC_LIBS 1) endif() set(HAVE_PAPI 0) if(enable_smpi_papi) include(FindPAPI) if (NOT HAVE_PAPI) message(FATAL_ERROR "Cannot find PAPI. Please install it (apt-get install papi-tools libpapi-dev) or disable PAPI bindings.") endif() endif() find_package(Boost 1.48) if(Boost_FOUND) include_directories(${Boost_INCLUDE_DIRS}) else() if(APPLE) message(FATAL_ERROR "Failed to find Boost libraries (Try to install them with 'sudo fink install boost1.53.nopython')") else() message(FATAL_ERROR "Failed to find Boost libraries." "Did you install libboost-dev and libboost-context-dev?" "(libboost-context-dev is optional)" "SimGrid requires Boost >= 1.48.0") endif() endif() #Boost context 1.61 will break compatibility with our implementation. #Warn users about that find_package(Boost 1.61 COMPONENTS context) if(Boost_FOUND AND Boost_CONTEXT_FOUND) message("WARNING : our implementation of Boost context factory is not compatible with Boost >=1.61 yet.") set(Boost_FOUND 1) set(HAVE_BOOST_CONTEXTS 0) else() # Try again to see if we have libboost-context find_package(Boost 1.42 COMPONENTS context) set(Boost_FOUND 1) # We don't care of whether this component is missing if(Boost_FOUND AND Boost_CONTEXT_FOUND) # We should use feature detection for this instead: if (Boost_VERSION LESS 105600) message("Found Boost.Context API v1") set(HAVE_BOOST_CONTEXTS 1) else() message("Found Boost.Context API v2") set(HAVE_BOOST_CONTEXTS 2) endif() else() message (" boost : found.") message (" boost-context: missing. Install libboost-context-dev for this optional feature.") set(HAVE_BOOST_CONTEXTS 0) endif() endif() # Try again to see if we have libboost-graph #find_package(Boost 1.42 COMPONENTS graph) #set(Boost_FOUND 1) # We don't care of whether this component is missing # #if(Boost_FOUND AND Boost_GRAPH_FOUND) # set(HAVE_BOOST_GRAPH 1) #else() # message (" boost : found.") # message (" boost-graph : missing. Install libboost-graph-dev for this optional feature.") # set(HAVE_BOOST_GRAPH 0) #endif() # Checks for header libraries functions. CHECK_LIBRARY_EXISTS(rt clock_gettime "" HAVE_POSIX_GETTIME) CHECK_LIBRARY_EXISTS(pthread pthread_create "" HAVE_PTHREAD) CHECK_LIBRARY_EXISTS(pthread sem_init "" HAVE_SEM_INIT_LIB) CHECK_LIBRARY_EXISTS(pthread sem_open "" HAVE_SEM_OPEN_LIB) set(HAVE_PTHREAD_SETAFFINITY 0) CHECK_LIBRARY_EXISTS(pthread pthread_setaffinity_np "" HAVE_PTHREAD_SETAFFINITY) if(CMAKE_SYSTEM_NAME MATCHES "Darwin") set(CMAKE_REQUIRED_DEFINITIONS "-D_XOPEN_SOURCE=700 -D_DARWIN_C_SOURCE") elseif(MINGW) # Use the GNU version of unusual modifiers like PRIx64 add_definitions(-D__USE_MINGW_ANSI_STDIO=1) set(CMAKE_REQUIRED_DEFINITIONS "-D__USE_MINGW_ANSI_STDIO=1") else() set(CMAKE_REQUIRED_DEFINITIONS "-D_GNU_SOURCE") endif() CHECK_INCLUDE_FILE("valgrind/valgrind.h" HAVE_VALGRIND_H) CHECK_INCLUDE_FILE("unistd.h" HAVE_UNISTD_H) CHECK_INCLUDE_FILE("execinfo.h" HAVE_EXECINFO_H) CHECK_INCLUDE_FILE("signal.h" HAVE_SIGNAL_H) CHECK_INCLUDE_FILE("sys/param.h" HAVE_SYS_PARAM_H) CHECK_INCLUDE_FILE("sys/sysctl.h" HAVE_SYS_SYSCTL_H) CHECK_INCLUDE_FILE("ucontext.h" HAVE_UCONTEXT_H) CHECK_INCLUDE_FILE("linux/futex.h" HAVE_FUTEX_H) CHECK_FUNCTION_EXISTS(backtrace HAVE_BACKTRACE) CHECK_FUNCTION_EXISTS(gettimeofday HAVE_GETTIMEOFDAY) CHECK_FUNCTION_EXISTS(nanosleep HAVE_NANOSLEEP) CHECK_FUNCTION_EXISTS(getdtablesize HAVE_GETDTABLESIZE) CHECK_FUNCTION_EXISTS(sysconf HAVE_SYSCONF) CHECK_FUNCTION_EXISTS(popen HAVE_POPEN) CHECK_FUNCTION_EXISTS(process_vm_readv HAVE_PROCESS_VM_READV) CHECK_FUNCTION_EXISTS(mmap HAVE_MMAP) CHECK_SYMBOL_EXISTS(vasprintf stdio.h HAVE_VASPRINTF) if(MINGW) # The detection of vasprintf fails on MinGW, assumingly because it's # defined as an inline function in stdio.h instead of a regular # function. So force the result to be 1 despite of the test. set(HAVE_VASPRINTF 1) endif() #Check if __thread is defined execute_process( COMMAND "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_thread_storage.c -o testprog" WORKING_DIRECTORY ${CMAKE_BINARY_DIR} RESULT_VARIABLE HAVE_thread_storage_run) file(REMOVE testprog) if(HAVE_thread_storage_run) set(HAVE_THREAD_LOCAL_STORAGE 1) else() set(HAVE_THREAD_LOCAL_STORAGE 0) endif() # Our usage of mmap is Linux-specific (flag MAP_ANONYMOUS), but kFreeBSD uses a GNU libc IF(HAVE_MMAP AND NOT "${CMAKE_SYSTEM}" MATCHES "Linux" AND NOT "${CMAKE_SYSTEM}" MATCHES "kFreeBSD" AND NOT "${CMAKE_SYSTEM}" MATCHES "GNU" AND NOT "${CMAKE_SYSTEM}" MATCHES "Darwin") SET(HAVE_MMAP 0) message(STATUS "Warning: MMAP is thought as non functional on this architecture (${CMAKE_SYSTEM})") ENDIF() if(HAVE_MMAP AND HAVE_THREAD_LOCAL_STORAGE) SET(HAVE_MMALLOC 1) else() SET(HAVE_MMALLOC 0) endif() if(enable_jedule) set(HAVE_JEDULE 1) else() set(HAVE_JEDULE 0) endif() if(enable_mallocators) SET(HAVE_MALLOCATOR 1) else() SET(HAVE_MALLOCATOR 0) endif() if(enable_model-checking AND HAVE_MMALLOC) SET(HAVE_MC 1) include(FindLibunwind) include(FindLibdw) else() if(enable_model-checking) message(STATUS "Warning: support for model-checking has been disabled because you are missing either mmap or __thread.") endif() SET(HAVE_MC 0) SET(HAVE_MMALLOC 0) endif() if (enable_model-checking AND enable_ns3) message(FATAL_ERROR "Cannot activate both model-checking and NS3 bindings: NS3 pull too much dependencies for the MC to work") endif() if(enable_smpi) include(FindGFortran) SET(HAVE_SMPI 1) if("${CMAKE_SYSTEM}" MATCHES "Linux") SET(USE_LIBUTIL 0) SET(HAVE_PRIVATIZATION 1) elseif("${CMAKE_SYSTEM}" MATCHES "^FreeBSD") SET(USE_LIBUTIL 0) SET(HAVE_PRIVATIZATION 0) else() message (STATUS "Warning: no support for SMPI automatic privatization on this platform") SET(HAVE_PRIVATIZATION 0) endif() else() SET(HAVE_SMPI 0) endif() #-------------------------------------------------------------------------------------------------- ### Check for GNU dynamic linker CHECK_INCLUDE_FILE("dlfcn.h" HAVE_DLFCN_H) if (HAVE_DLFCN_H) execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_gnu_dynlinker.c -ldl -o test_gnu_ld WORKING_DIRECTORY ${CMAKE_BINARY_DIR} OUTPUT_VARIABLE HAVE_GNU_LD_compil ) if(HAVE_GNU_LD_compil) set(HAVE_GNU_LD 0) message(STATUS "Warning: test program toward GNU ld failed to compile:") message(STATUS "${HAVE_GNU_LD_comp_output}") else() execute_process(COMMAND ./test_gnu_ld WORKING_DIRECTORY ${CMAKE_BINARY_DIR} RESULT_VARIABLE HAVE_GNU_LD_run OUTPUT_VARIABLE var_exec ) if(NOT HAVE_GNU_LD_run) set(HAVE_GNU_LD 1) message(STATUS "We are using GNU dynamic linker") else() set(HAVE_GNU_LD 0) message(STATUS "Warning: error while checking for GNU ld:") message(STATUS "Test output: '${var_exec}'") message(STATUS "Exit status: ${HAVE_GNU_LD_run}") endif() file(REMOVE test_gnu_ld) endif() endif() #-------------------------------------------------------------------------------------------------- ### Initialize of CONTEXT THREADS set(HAVE_THREAD_CONTEXTS 0) if(HAVE_PTHREAD) ### Test that we have a way to create semaphores if(HAVE_SEM_OPEN_LIB) execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_open.c -lpthread -o sem_open WORKING_DIRECTORY ${CMAKE_BINARY_DIR} OUTPUT_VARIABLE HAVE_SEM_OPEN_compil ) # Test sem_open by compiling: if(HAVE_SEM_OPEN_compil) set(HAVE_SEM_OPEN 0) message(STATUS "Warning: sem_open not compilable") message(STATUS "HAVE_SEM_OPEN_comp_output: ${HAVE_SEM_OPEN_comp_output}") else() set(HAVE_SEM_OPEN 1) message(STATUS "sem_open is compilable") endif() # If we're not crosscompiling, we check by executing the program: if (HAVE_SEM_OPEN AND NOT CMAKE_CROSSCOMPILING) execute_process(COMMAND ./sem_open WORKING_DIRECTORY ${CMAKE_BINARY_DIR} RESULT_VARIABLE HAVE_SEM_OPEN_run OUTPUT_VARIABLE var_compil ) if (NOT HAVE_SEM_OPEN_run) set(HAVE_SEM_OPEN 1) message(STATUS "sem_open is executable") else() set(HAVE_SEM_OPEN 0) if(EXISTS "${CMAKE_BINARY_DIR}/sem_open") message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_open exists!") else() message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_open not exists!") endif() message(STATUS "Warning: sem_open not executable") message(STATUS "Compilation output: '${var_compil}'") message(STATUS "Exit result of sem_open: ${HAVE_SEM_OPEN_run}") endif() endif() file(REMOVE sem_open) else() set(HAVE_SEM_OPEN 0) endif() if(HAVE_SEM_INIT_LIB) execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_init.c -lpthread -o sem_init WORKING_DIRECTORY ${CMAKE_BINARY_DIR} RESULT_VARIABLE HAVE_SEM_INIT_run OUTPUT_VARIABLE HAVE_SEM_INIT_compil) # Test sem_init by compiling: if(HAVE_SEM_INIT_compil) set(HAVE_SEM_INIT 0) message(STATUS "Warning: sem_init not compilable") message(STATUS "HAVE_SEM_INIT_comp_output: ${HAVE_SEM_OPEN_comp_output}") else() set(HAVE_SEM_INIT 1) message(STATUS "sem_init is compilable") endif() # If we're not crosscompiling, we check by executing the program: if (HAVE_SEM_INIT AND NOT CMAKE_CROSSCOMPILING) execute_process(COMMAND ./sem_init WORKING_DIRECTORY ${CMAKE_BINARY_DIR} RESULT_VARIABLE HAVE_SEM_INIT_run OUTPUT_VARIABLE var_compil ) if (NOT HAVE_SEM_INIT_run) set(HAVE_SEM_INIT 1) message(STATUS "sem_init is executable") else() set(HAVE_SEM_INIT 0) if(EXISTS "${CMAKE_BINARY_DIR}/sem_init") message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_init exists!") else() message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_init not exists!") endif() message(STATUS "Warning: sem_init not executable") message(STATUS "Compilation output: '${var_compil}'") message(STATUS "Exit result of sem_init: ${HAVE_SEM_INIT_run}") endif() endif() file(REMOVE sem_init) endif() if(NOT HAVE_SEM_OPEN AND NOT HAVE_SEM_INIT) message(FATAL_ERROR "Semaphores are not usable (neither sem_open nor sem_init is both compilable and executable), but they are mandatory to threads (you may need to mount /dev).") endif() set(HAVE_THREAD_CONTEXTS 1) message("-- Support for thread context factory ok.") endif() set(HAVE_UCONTEXT_CONTEXTS 0) if(NOT HAVE_UCONTEXT_H) message("-- No ucontext factory: not found.") elseif(APPLE) message("-- No ucontext factory: Apple don't want us to use them.") set(HAVE_UCONTEXT_H 0) else() try_compile(compile_makecontext ${CMAKE_BINARY_DIR} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_makecontext.c OUTPUT_VARIABLE compile_makecontext_output) #If can have both context if(compile_makecontext) set(HAVE_UCONTEXT_CONTEXTS 1) message("-- Support for ucontext factory ok.") else() message("-- Error: exists, but makecontext is not compilable. Compilation output:\n ${compile_makecontext_output}") message("-- No ucontext factory: makecontext() is not compilable.") endif() # Stack setup (size and address) try_run(RUN_makecontext_VAR COMPILE_makecontext_VAR ${CMAKE_BINARY_DIR} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_stacksetup.c RUN_OUTPUT_VARIABLE stack_setup) LIST(LENGTH stack_setup stack_setup_len) if("${stack_setup_len}" STREQUAL "2") LIST(GET stack_setup 0 makecontext_addr) LIST(GET stack_setup 1 makecontext_size) set(sg_makecontext_stack_addr "#define sg_makecontext_stack_addr(skaddr) (${makecontext_addr})") set(sg_makecontext_stack_size "#define sg_makecontext_stack_size(sksize) (${makecontext_size})") else() message(FATAL_ERROR "Could not figure out the stack setup. Compil: ${RUN_makecontext_VAR}. Exec: ${COMPILE_makecontext_VAR}. Output: ${stack_setup}") endif() endif() # Stack growth direction (upward or downward). Used for the following contexts: SysV, raw, Boost try_run(RUN_stackgrowth_VAR COMPILE_stackgrowth_VAR ${CMAKE_BINARY_DIR} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_stackgrowth.c RUN_OUTPUT_VARIABLE stack COPY_FILE test_stackgrowth) if("${stack}" STREQUAL "down") set(PTH_STACKGROWTH "-1") elseif("${stack}" STREQUAL "up") set(PTH_STACKGROWTH "1") else() if("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "x86_64") set(PTH_STACKGROWTH "-1") elseif("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "i686") set(PTH_STACKGROWTH "-1") else() message(FATAL_ERROR "Could not figure out the stack direction. Test prog returned: ${stack}; CMAKE_SYSTEM_PROCESSOR: ${CMAKE_SYSTEM_PROCESSOR}.") endif() endif() # If the test ran well, remove the test binary file(REMOVE test_stackgrowth) #-------------------------------------------------------------------------------------------------- ### check for addr2line find_path(ADDR2LINE NAMES addr2line PATHS NO_DEFAULT_PATHS) if(ADDR2LINE) set(ADDR2LINE "${ADDR2LINE}/addr2line") endif() ############### ## GIT version check ## if(EXISTS ${CMAKE_HOME_DIRECTORY}/.git/) execute_process( COMMAND git remote COMMAND head -n 1 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/ OUTPUT_VARIABLE remote OUTPUT_STRIP_TRAILING_WHITESPACE) #message(STATUS "Git remote: ${remote}") execute_process(COMMAND git config --get remote.${remote}.url WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/ OUTPUT_VARIABLE url OUTPUT_STRIP_TRAILING_WHITESPACE) #message(STATUS "Git url: ${url}") if(url) execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log --pretty=oneline --abbrev-commit -1 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/ OUTPUT_VARIABLE GIT_VERSION OUTPUT_STRIP_TRAILING_WHITESPACE) message(STATUS "Git version: ${GIT_VERSION}") execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log -n 1 --pretty=format:%ai . WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/ OUTPUT_VARIABLE GIT_DATE OUTPUT_STRIP_TRAILING_WHITESPACE) message(STATUS "Git date: ${GIT_DATE}") string(REGEX REPLACE " .*" "" GIT_VERSION "${GIT_VERSION}") execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log --pretty=format:%H -1 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/ OUTPUT_VARIABLE SIMGRID_GITHASH OUTPUT_STRIP_TRAILING_WHITESPACE) endif() elseif(EXISTS ${CMAKE_HOME_DIRECTORY}/.gitversion) FILE(STRINGS ${CMAKE_HOME_DIRECTORY}/.gitversion GIT_VERSION) endif() ### Generate the required headers and scripts ############################################# # gcc makes no difference between "#define HAVE_FOOBAR" and "#define HAVE_FOOBAR 0" by default, # but this too error prone. If you forget to include the config.h, you get weird segfaults. # If you include it everywhere, everything gets recompiled everytime. # So we include only where needed, and compile with -Wundef to notice the missing includes. # But cmake sometimes defines to the empty definition (#define HAVE_VALGRIND_H). # So we have to make sure that everything got a decent value before generating the files. foreach(var HAVE_BACKTRACE HAVE_EXECINFO_H HAVE_FUTEX_H HAVE_GETDTABLESIZE HAVE_GETTIMEOFDAY HAVE_MMAP HAVE_NANOSLEEP HAVE_POPEN HAVE_POSIX_GETTIME HAVE_PROCESS_VM_READV HAVE_SIGNAL_H HAVE_SYS_PARAM_H HAVE_SYS_SYSCTL_H HAVE_SYSCONF HAVE_UCONTEXT_H HAVE_UNISTD_H HAVE_VALGRIND_H HAVE_VASPRINTF) if(${var}) set(${var} 1) else() set(${var} 0) endif() endforeach() # Avoid triggering a (full) rebuild by touching the files if they did not really change configure_file("${CMAKE_HOME_DIRECTORY}/tools/cmake/src/internal_config.h.in" "${CMAKE_BINARY_DIR}/src/internal_config.h.generated" @ONLY IMMEDIATE) configure_file("${CMAKE_HOME_DIRECTORY}/include/simgrid_config.h.in" "${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated" @ONLY IMMEDIATE) execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/src/internal_config.h.generated ${CMAKE_BINARY_DIR}/src/internal_config.h) execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated ${CMAKE_BINARY_DIR}/include/simgrid_config.h) file(REMOVE ${CMAKE_BINARY_DIR}/src/internal_config.h.generated) file(REMOVE ${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated) # We need two versions of the SMPI scripts because they contain the path to the library # so, it depends of whether SimGrid is installed, or run from the sources (during the build) file(READ ${CMAKE_HOME_DIRECTORY}/src/smpi/smpitools.sh SMPITOOLS_SH) # Definitions shared amongst all SMPI scripts, inlined in each of them ### SMPI script used when simgrid is installed set(exec_prefix ${CMAKE_INSTALL_PREFIX}) set(includeflag "-I${CMAKE_INSTALL_PREFIX}/include -I${CMAKE_INSTALL_PREFIX}/include/smpi") set(includedir "${CMAKE_INSTALL_PREFIX}/include") set(libdir ${exec_prefix}/lib) set(CMAKE_SMPI_COMMAND "export LD_LIBRARY_PATH=\"${CMAKE_INSTALL_PREFIX}/lib") if(NS3_LIBRARY_PATH) set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}") endif() set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"") configure_file(${CMAKE_HOME_DIRECTORY}/include/smpi/mpif.h.in ${CMAKE_BINARY_DIR}/include/smpi/mpif.h @ONLY) foreach(script cc cxx ff f90 run) configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpi${script}.in ${CMAKE_BINARY_DIR}/bin/smpi${script} @ONLY) endforeach() ### SMPI scripts used when compiling simgrid set(exec_prefix "${CMAKE_BINARY_DIR}/smpi_script/") set(includeflag "-I${CMAKE_HOME_DIRECTORY}/include -I${CMAKE_HOME_DIRECTORY}/include/smpi") set(includeflag "${includeflag} -I${CMAKE_BINARY_DIR}/include -I${CMAKE_BINARY_DIR}/include/smpi") set(includedir "${CMAKE_HOME_DIRECTORY}/include") set(libdir "${CMAKE_BINARY_DIR}/lib") set(CMAKE_SMPI_COMMAND "export LD_LIBRARY_PATH=\"${CMAKE_BINARY_DIR}/lib") if(NS3_LIBRARY_PATH) set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}") endif() set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"") foreach(script cc cxx ff f90 run) configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpi${script}.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpi${script} @ONLY) endforeach() if(NOT WIN32) foreach(script cc cxx ff f90 run) execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpi${script}) execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/smpi_script/bin/smpi${script}) endforeach() endif() set(generated_headers_to_install ${CMAKE_CURRENT_BINARY_DIR}/include/smpi/mpif.h ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid_config.h ) set(generated_headers ${CMAKE_CURRENT_BINARY_DIR}/src/internal_config.h ) set(generated_files_to_clean ${generated_headers} ${generated_headers_to_install} ${CMAKE_BINARY_DIR}/bin/smpicc ${CMAKE_BINARY_DIR}/bin/smpicxx ${CMAKE_BINARY_DIR}/bin/smpiff ${CMAKE_BINARY_DIR}/bin/smpif90 ${CMAKE_BINARY_DIR}/bin/smpirun ${CMAKE_BINARY_DIR}/bin/colorize ${CMAKE_BINARY_DIR}/bin/simgrid_update_xml ${CMAKE_BINARY_DIR}/examples/smpi/tracing/smpi_traced.trace ) if(NOT "${CMAKE_BINARY_DIR}" STREQUAL "${CMAKE_HOME_DIRECTORY}") configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allReduce.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_barrier.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_bcast.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_with_isend.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_alltoall.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoall.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_alltoallv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoallv.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_waitall.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_waitall.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_reducescatter.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_reducescatter.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_gather.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_gather.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allgatherv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allgatherv.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/teshsuite/smpi/hostfile ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/description_file ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/description_file COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/README ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/README COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/smpi_replay.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/smpi_replay.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt COPYONLY) set(generated_files_to_clean ${generated_files_to_clean} ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoall.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoallv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_waitall.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_gather.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allgatherv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_reducescatter.txt ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/description_file ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/README ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/smpi_replay.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt ) endif() SET_DIRECTORY_PROPERTIES(PROPERTIES ADDITIONAL_MAKE_CLEAN_FILES "${generated_files_to_clean}") ### Define source packages for Libs include(${CMAKE_HOME_DIRECTORY}/tools/cmake/DefinePackages.cmake) ### Build some Maintainer files include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MaintainerMode.cmake) include(${CMAKE_HOME_DIRECTORY}/tools/cmake/UnitTesting.cmake) ### Setup gcc & clang flags if (NOT MSVC) include(${CMAKE_HOME_DIRECTORY}/tools/cmake/GCCFlags.cmake) endif() ### Make Libs if(NOT WIN32) include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MakeLib.cmake) else() include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MakeLibWin.cmake) endif() if(enable_java) include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Java.cmake) endif() ### Make tests if(enable_memcheck_xml) set(enable_memcheck true) endif() INCLUDE(CTest) ENABLE_TESTING() include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Tests.cmake) include(${CMAKE_HOME_DIRECTORY}/tools/cmake/CTestConfig.cmake) ### Define subdirectories foreach(cmakefile ${CMAKEFILES_TXT}) string(REPLACE "/CMakeLists.txt" "" repository ${cmakefile}) add_subdirectory("${CMAKE_HOME_DIRECTORY}/${repository}") endforeach() ### Setup the distrib include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Distrib.cmake) ### Build the doc (Windows downloads the doc instead of regenerating) # if(NOT WIN32) include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Documentation.cmake) else() find_program(WGET_PROGRAM NAMES wget) message(STATUS "wget: ${WGET_PROGRAM}") if(WGET_PROGRAM) ADD_CUSTOM_TARGET(documentation COMMENT "Downloading the SimGrid documentation..." COMMAND ${WGET_PROGRAM} -r -np -nH -nd http://simgrid.gforge.inria.fr/simgrid/${release_version}/doc/ WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/doc/html ) endif() endif() ### Print the result of configuration message("") message("##########################################") message("#### Content of src/internal_config.h ####") message("##########################################") file(STRINGS ${CMAKE_CURRENT_BINARY_DIR}/src/internal_config.h config_output) LIST(REMOVE_AT config_output 0 1 2 3 4 5 6 7 8 9 10) # Pass the file header foreach(line ${config_output}) message(" ${line}") endforeach() message("##########################################") message("#### Content of simgrid_config.h ####") message("##########################################") file(STRINGS ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid_config.h config_output) LIST(REMOVE_AT config_output 0 1 2 3 4 5 6 7 8 9 -1) # Pass the file header foreach(line ${config_output}) message(" ${line}") endforeach() message("##########################################") message("#### End of configuration headers ####") message("##########################################") message("\nConfiguration of package `simgrid':") message(" Home directory ..............: ${CMAKE_HOME_DIRECTORY}") message(" Build Name ..................: ${BUILDNAME}") message(" Cmake Generator .............: ${CMAKE_GENERATOR}") message(" Site ........................: ${SITE}") message(" Install prefix ..............: ${CMAKE_INSTALL_PREFIX}") if(release) message(" Release .....................: simgrid-${release_version}${SIMGRID_VERSION_EXTRA} (release build)") else() message(" Release .....................: simgrid-${release_version}${SIMGRID_VERSION_EXTRA} (development build)") endif() message("") message(" Compiler: C .................: ${CMAKE_C_COMPILER} (id: ${CMAKE_C_COMPILER_ID})") message(" version .............: ${CMAKE_C_COMPILER_VERSION}") message(" is gnu ..............: ${CMAKE_COMPILER_IS_GNUCC}") message(" Compiler: C++ ...............: ${CMAKE_CXX_COMPILER} (id: ${CMAKE_CXX_COMPILER_ID})") message(" version .............: ${CMAKE_CXX_COMPILER_VERSION}") if(${Java_FOUND}) message(" Compiler: Javac .............: ${Java_JAVAC_EXECUTABLE}") message(" version .............: ${Java_VERSION_STRING}") if(${SWIG_FOUND}) message(" SWIG ................: Version ${SWIG_VERSION} found.") else() message(" SWIG ................: Missing.") endif() endif() if(CMAKE_Fortran_COMPILER) message(" Compiler: Fortran ...........: ${CMAKE_Fortran_COMPILER} (id: ${CMAKE_Fortran_COMPILER_ID})") message(" version .............: ${CMAKE_Fortran_COMPILER_VERSION}") endif() message(" Linker: .....................: ${CMAKE_LINKER}") message(" version .............: ${LINKER_VERSION}") message(" Make program: ...............: ${CMAKE_MAKE_PROGRAM}") message("") message(" CFlags ......................: ${CMAKE_C_FLAGS}") message(" CXXFlags ....................: ${CMAKE_CXX_FLAGS}") message(" LDFlags .....................: ${CMAKE_C_LINK_FLAGS}") message(" with LTO ....................: ${enable_lto}") message("") if (HAVE_NS3) message(" Compile NS-3 ................: yes (path: ${NS3_PATH})") else() message(" Compile NS-3 ................: NO (hint: ${NS3_HINT})") endif() if (${Java_FOUND}) message(" Compile Java ................: yes") message(" Native lib in jar .........: ${enable_lib_in_jar}") else() message(" Compile Java ................: NO") endif() message(" Compile Lua .................: ${HAVE_LUA}") message(" Compile Smpi ................: ${HAVE_SMPI}") message(" Smpi fortran ..............: ${SMPI_FORTRAN}") message(" MPICH3 testsuite ..........: ${enable_smpi_MPICH3_testsuite}") message(" Privatization .............: ${HAVE_PRIVATIZATION}") message(" PAPI support...............: ${HAVE_PAPI}") message(" Compile Boost.Context support: ${HAVE_BOOST_CONTEXTS}") message("") message(" Maintainer mode .............: ${enable_maintainer_mode}") message(" Documentation................: ${enable_documentation}") message(" Model checking ..............: ${HAVE_MC}") message(" Jedule mode ................: ${HAVE_JEDULE}") message(" Graphviz mode ...............: ${HAVE_GRAPHVIZ}") message(" Mallocators .................: ${enable_mallocators}") message("") message(" Simgrid dependencies ........: ${SIMGRID_DEP}") message("") execute_process(COMMAND ${CMAKE_COMMAND} -E make_directory ${PROJECT_BINARY_DIR}/Testing/Notes/) file(WRITE ${PROJECT_BINARY_DIR}/Testing/Notes/Build "GIT version : ${GIT_VERSION}\n") file(APPEND ${PROJECT_BINARY_DIR}/Testing/Notes/Build "Release : simgrid-${release_version}\n") INCLUDE(Dart)