cmake_minimum_required(VERSION 2.8.8) message(STATUS "Cmake version ${CMAKE_MAJOR_VERSION}.${CMAKE_MINOR_VERSION}.${CMAKE_PATCH_VERSION}") set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${CMAKE_HOME_DIRECTORY}/tools/cmake/Modules) project(SimGrid C CXX) #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Check for the compiler # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# ### Need to set rc ccompiler before enable language if(WIN32) SET(CMAKE_RC_COMPILER "windres") endif() ## ## Check the C/C++ standard that we need ## See also tools/cmake/GCCFlags.cmake that sets our paranoid warning flags if (MSVC) message("-- You are compiling SimGrid with MicroSoft Visual C. Good luck.") set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -D_SCL_SECURE_NO_WARNINGS") set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -D_SCL_SECURE_NO_WARNINGS") else() # gcc or clang INCLUDE(CheckCCompilerFlag) CHECK_C_COMPILER_FLAG(-fstack-cleaner HAVE_C_STACK_CLEANER) ## Request full debugging flags set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -g3") set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -g3") set(CMAKE_Fortran_FLAGS "${CMAKE_Fortran_FLAGS} -g") if (CMAKE_COMPILER_IS_GNUCC) if (CMAKE_CXX_COMPILER_VERSION VERSION_LESS "4.7") message(FATAL_ERROR "SimGrid needs at least g++ version 4.7 to compile but you have ${CMAKE_CXX_COMPILER_VERSION}." "You need a sufficient support of c++11 to compile SimGrid.") endif() endif() ## We need a decent support of the c++11 standard include(CheckCXXCompilerFlag) CHECK_CXX_COMPILER_FLAG("-std=gnu++11" COMPILER_SUPPORTS_CXX11) if(COMPILER_SUPPORTS_CXX11) set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=gnu++11") else() message(FATAL_ERROR "The compiler ${CMAKE_CXX_COMPILER} (v${CMAKE_CXX_COMPILER_VERSION}) has no C++11 support. " "Please use a decent C++ compiler.") endif() ### And we need C11 standard, too include(CheckCCompilerFlag) CHECK_C_COMPILER_FLAG("-std=gnu11" COMPILER_SUPPORTS_C11) if(COMPILER_SUPPORTS_C11) set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -std=gnu11") else() message(FATAL_ERROR "The compiler ${CMAKE_C_COMPILER} (v${CMAKE_C_COMPILER_VERSION}) has no C11 support. " "Please use a decent C compiler " "(note that c++11 support of ${CMAKE_CXX_COMPILER} seems ok).") endif() if(APPLE AND (CMAKE_C_COMPILER_VERSION VERSION_LESS "4.6")) ### gcc 4.[1-5] cannot compile ucontext on OSX message(STATUS "Ucontext can't be used with this version of gcc (must be greater than 4.5)") set(HAVE_UCONTEXT_H 0) endif() endif() # NOT MSVC ### SMPI vs. Fortran if ((NOT DEFINED enable_smpi OR enable_smpi) AND NOT APPLE) # smpi is enabled by default # Call enable_language(Fortran) in order to load the build rules for # this language, needed by teshsuite/smpi/mpich-test/. Use # CMAKE_FORCE_Fortran_COMPILER to bypass checks for a working # compiler (smpiff don't exist at configure time). include(CMakeForceCompiler) if(NOT COMMAND CMAKE_FORCE_Fortran_COMPILER) MACRO(CMAKE_FORCE_Fortran_COMPILER compiler id) SET(CMAKE_Fortran_COMPILER "${compiler}") SET(CMAKE_Fortran_COMPILER_ID_RUN TRUE) SET(CMAKE_Fortran_COMPILER_ID ${id}) SET(CMAKE_Fortran_COMPILER_WORKS TRUE) SET(CMAKE_Fortran_COMPILER_FORCED TRUE) # Set old compiler id variables. IF("${CMAKE_Fortran_COMPILER_ID}" MATCHES "GNU") SET(CMAKE_COMPILER_IS_GNUG77 1) ENDIF("${CMAKE_Fortran_COMPILER_ID}" MATCHES "GNU") ENDMACRO(CMAKE_FORCE_Fortran_COMPILER) endif() CMAKE_FORCE_Fortran_COMPILER(smpiff smpiff) enable_language(Fortran OPTIONAL) endif() #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Build the version number # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# set(SIMGRID_VERSION_MAJOR "3") set(SIMGRID_VERSION_MINOR "13") set(SIMGRID_VERSION_PATCH "0") set(SIMGRID_VERSION_EXTRA "-devel") # Extra words to add to version string (e.g. -rc1) set(SIMGRID_VERSION_DATE "2015") # Year for copyright information if(${SIMGRID_VERSION_PATCH} EQUAL "0") set(release_version "${SIMGRID_VERSION_MAJOR}.${SIMGRID_VERSION_MINOR}") else() set(release_version "${SIMGRID_VERSION_MAJOR}.${SIMGRID_VERSION_MINOR}.${SIMGRID_VERSION_PATCH}") endif() set(SIMGRID_VERSION_STRING "SimGrid version ${release_version}${SIMGRID_VERSION_EXTRA}") set(SIMGRID_VERSION_BANNER "SIMGRID_VERSION_STRING\\nCopyright (c) 2004-${SIMGRID_VERSION_DATE}. The Simgrid Team.") if(release) set(SIMGRID_VERSION_BANNER "${SIMGRID_VERSION_BANNER}\\nRelease build") else() set(SIMGRID_VERSION_BANNER "${SIMGRID_VERSION_BANNER}\\nDevelopment build") endif() set(libsimgrid_version "${release_version}") set(libsimgrid-java_version "${release_version}") ### SET THE LIBRARY EXTENSION if(APPLE) #MAC set(LIB_EXE "dylib") else() if(WIN32) #WINDOWS set(LIB_EXE "a") set(BIN_EXE ".exe") else() #UNIX set(LIB_EXE "so") endif() endif() exec_program("${CMAKE_LINKER} --version" OUTPUT_VARIABLE "LINKER_VERSION") string(REGEX MATCH "[0-9].[0-9]*" LINKER_VERSION "${LINKER_VERSION}") ### Find programs and paths FIND_PROGRAM(GCOV_PATH gcov) include(FindPerl) if(NOT PERL_FOUND) message(FATAL_ERROR "Please install Perl to compile SimGrid.") endif() if (APPLE) set(CMAKE_INSTALL_RPATH "${CMAKE_INSTALL_PREFIX}/lib") set(CMAKE_INSTALL_RPATH_USE_LINK_PATH TRUE) endif() SET(LIBRARY_OUTPUT_PATH ${CMAKE_BINARY_DIR}/lib) ### Compute the include paths set(INCLUDES ${CMAKE_HOME_DIRECTORY} ${CMAKE_HOME_DIRECTORY}/include ${CMAKE_HOME_DIRECTORY}/src/include ${CMAKE_BINARY_DIR} ${CMAKE_BINARY_DIR}/include ) if(WIN32) set(INCLUDES ${INCLUDES} ${CMAKE_HOME_DIRECTORY}/include/xbt ${CMAKE_HOME_DIRECTORY}/src/xbt) #for win32_ucontext.[ch] endif() if(NOT CMAKE_CROSSCOMPILING AND EXISTS /usr/include/) set(INCLUDES ${INCLUDES} /usr/include/) endif() ### Check 32bits or 64bits IF(CMAKE_SIZEOF_VOID_P EQUAL 4) SET(ARCH_32_BITS 1) ELSE() SET(ARCH_32_BITS 0) ENDIF() if(WIN32) #Need env INCLUDE set(CMAKE_INCLUDE_WIN "${CMAKE_C_COMPILER}") set(CMAKE_LIB_WIN "${CMAKE_C_COMPILER}") string(REGEX REPLACE "/bin/gcc.*" "/include" CMAKE_INCLUDE_WIN "${CMAKE_INCLUDE_WIN}") string(REGEX REPLACE "/bin/gcc.*" "/lib" CMAKE_LIB_WIN "${CMAKE_LIB_WIN}") set(INCLUDES ${INCLUDES} ${CMAKE_INCLUDE_WIN}) unset(CMAKE_INCLUDE_WIN) find_program(NSIS_PROGRAM NAMES makensi) set(NSIS_WIN_VERSION $ENV{PROCESSOR_ARCHITEW6432}) if(NSIS_WIN_VERSION MATCHES "") set(NSIS_WIN_VERSION $ENV{PROCESSOR_ARCHITECTURE}) endif() if(${NSIS_WIN_VERSION}) string(TOLOWER ${NSIS_WIN_VERSION} NSIS_WIN_VERSION) endif() set(_XBT_WIN32 1) message(STATUS "C_COMPILER ${CMAKE_C_COMPILER} ${CMAKE_C_COMPILER_VERSION}") message(STATUS "CXX_COMPILER ${CMAKE_CXX_COMPILER} ${CMAKE_CXX_COMPILER_VERSION}") message(STATUS "CMAKE_RC_COMPILER ${CMAKE_RC_COMPILER}") message(STATUS "LIB ${CMAKE_LIB_WIN}") message(STATUS "MAKE_PROGRAM ${CMAKE_MAKE_PROGRAM}") message(STATUS "CMAKE_BUILD_TOOL ${CMAKE_BUILD_TOOL}") message(STATUS "LINKER ${CMAKE_LINKER}") message(STATUS "CMAKE_GENERATOR ${CMAKE_GENERATOR}") message(STATUS "GNUC ${CMAKE_COMPILER_IS_GNUCC}") endif() include_directories(${INCLUDES}) ### Setup Options include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Option.cmake) ### Determine the assembly flavor that we need today include(CMakeDetermineSystem) IF(CMAKE_SYSTEM_PROCESSOR MATCHES ".86|AMD64|amd64") IF(${ARCH_32_BITS}) message(STATUS "System processor: i686 (${CMAKE_SYSTEM_PROCESSOR}, 32 bits)") set(PROCESSOR_i686 1) ELSE() message(STATUS "System processor: x86_64 (${CMAKE_SYSTEM_PROCESSOR}, 64 bits)") set(PROCESSOR_x86_64 1) ENDIF() if (MSVC) message(STATUS "Disable fast raw contextes on Microsoft Visual.") else() set(HAVE_RAWCTX 1) endif() ENDIF() include(CheckFunctionExists) include(CheckTypeSize) include(CheckIncludeFile) include(CheckIncludeFiles) include(CheckLibraryExists) include(CheckSymbolExists) include(FindGraphviz) include(FindLibSigc++) if(enable_scala) find_package(Scala REQUIRED) message("-- [Scala] scalac found: ${SCALA_COMPILE}") set(HAVE_Scala 1) endif() if(enable_lua) include(FindLuaSimgrid) endif() set(HAVE_NS3 0) if(enable_ns3) include(FindNS3) if (NOT HAVE_NS3) message(FATAL_ERROR "Cannot find NS3. Please install it (apt-get install ns3 libns3-dev) or disable that cmake option") endif() endif() find_package(Boost 1.48) if(Boost_FOUND) include_directories(${Boost_INCLUDE_DIRS}) else() if(APPLE) message(FATAL_ERROR "Failed to find Boost libraries (Try to install them with 'sudo fink install boost1.53.nopython')") else() message(FATAL_ERROR "Failed to find Boost libraries." "Did you install libboost-dev and libboost-context-dev?" "(libboost-context-dev is optional)") endif() endif() # Try again to see if we have libboost-context find_package(Boost 1.42 COMPONENTS context) set(Boost_FOUND 1) # We don't care of whether this component is missing if(Boost_FOUND AND Boost_CONTEXT_FOUND) # We should use feature detection for this instead: if (Boost_VERSION LESS 105600) message("Found Boost.Context API v1") set(HAVE_BOOST_CONTEXT 1) else() message("Found Boost.Context API v2") set(HAVE_BOOST_CONTEXT 2) endif() else() message (" boost : found.") message (" boost-context: missing. Install libboost-context-dev for this optional feature.") set(HAVE_BOOST_CONTEXT 0) endif() # Checks for header libraries functions. CHECK_LIBRARY_EXISTS(dl dlopen "" HAVE_DLOPEN_IN_LIBDL) CHECK_LIBRARY_EXISTS(execinfo backtrace "" HAVE_BACKTRACE_IN_LIBEXECINFO) CHECK_LIBRARY_EXISTS(pthread pthread_create "" HAVE_PTHREAD) CHECK_LIBRARY_EXISTS(pthread sem_init "" HAVE_SEM_INIT_LIB) CHECK_LIBRARY_EXISTS(pthread sem_open "" HAVE_SEM_OPEN_LIB) CHECK_LIBRARY_EXISTS(pthread sem_timedwait "" HAVE_SEM_TIMEDWAIT_LIB) CHECK_LIBRARY_EXISTS(pthread pthread_mutex_timedlock "" HAVE_MUTEX_TIMEDLOCK_LIB) CHECK_LIBRARY_EXISTS(rt clock_gettime "" HAVE_POSIX_GETTIME) if(CMAKE_SYSTEM_NAME MATCHES "Darwin") set(CMAKE_REQUIRED_DEFINITIONS "-D_XOPEN_SOURCE=700 -D_DARWIN_C_SOURCE") elseif(MINGW) add_definitions(-D__USE_MINGW_ANSI_STDIO=1) set(CMAKE_REQUIRED_DEFINITIONS "-D__USE_MINGW_ANSI_STDIO=1") else() set(CMAKE_REQUIRED_DEFINITIONS "-D_GNU_SOURCE") endif() CHECK_INCLUDE_FILES("stdlib.h;stdarg.h;string.h;float.h" STDC_HEADERS) CHECK_INCLUDE_FILE("valgrind/valgrind.h" HAVE_VALGRIND_VALGRIND_H) CHECK_INCLUDE_FILE("socket.h" HAVE_SOCKET_H) CHECK_INCLUDE_FILE("stat.h" HAVE_STAT_H) CHECK_INCLUDE_FILE("sys/stat.h" HAVE_SYS_STAT_H) CHECK_INCLUDE_FILE("sys/ptrace.h" HAVE_SYS_PTRACE_H) CHECK_INCLUDE_FILE("windows.h" HAVE_WINDOWS_H) CHECK_INCLUDE_FILE("errno.h" HAVE_ERRNO_H) CHECK_INCLUDE_FILE("unistd.h" HAVE_UNISTD_H) CHECK_INCLUDE_FILE("execinfo.h" HAVE_EXECINFO_H) CHECK_INCLUDE_FILE("signal.h" HAVE_SIGNAL_H) CHECK_INCLUDE_FILE("sys/time.h" HAVE_SYS_TIME_H) CHECK_INCLUDE_FILE("sys/param.h" HAVE_SYS_PARAM_H) CHECK_INCLUDE_FILE("sys/sysctl.h" HAVE_SYS_SYSCTL_H) CHECK_INCLUDE_FILE("time.h" HAVE_TIME_H) CHECK_INCLUDE_FILE("string.h" HAVE_STRING_H) CHECK_INCLUDE_FILE("ucontext.h" HAVE_UCONTEXT_H) CHECK_INCLUDE_FILE("stdio.h" HAVE_STDIO_H) CHECK_INCLUDE_FILE("linux/futex.h" HAVE_FUTEX_H) CHECK_FUNCTION_EXISTS(gettimeofday HAVE_GETTIMEOFDAY) CHECK_FUNCTION_EXISTS(nanosleep HAVE_NANOSLEEP) CHECK_FUNCTION_EXISTS(getdtablesize HAVE_GETDTABLESIZE) CHECK_FUNCTION_EXISTS(sysconf HAVE_SYSCONF) CHECK_FUNCTION_EXISTS(readv HAVE_READV) CHECK_FUNCTION_EXISTS(popen HAVE_POPEN) CHECK_FUNCTION_EXISTS(signal HAVE_SIGNAL) CHECK_SYMBOL_EXISTS(snprintf stdio.h HAVE_SNPRINTF) CHECK_SYMBOL_EXISTS(vsnprintf stdio.h HAVE_VSNPRINTF) CHECK_SYMBOL_EXISTS(asprintf stdio.h HAVE_ASPRINTF) CHECK_SYMBOL_EXISTS(vasprintf stdio.h HAVE_VASPRINTF) if(MINGW) # The detection of asprintf fails on MinGW, assumingly because it's # defined as an inline function in stdio.h instead of a regular # function. So force the result to be 1 despite of the test. set(HAVE_SNPRINTF 1) set(HAVE_VSNPRINTF 1) set(HAVE_ASPRINTF 1) set(HAVE_VASPRINTF 1) endif() CHECK_FUNCTION_EXISTS(makecontext HAVE_MAKECONTEXT) CHECK_FUNCTION_EXISTS(process_vm_readv HAVE_PROCESS_VM_READV) CHECK_FUNCTION_EXISTS(mmap HAVE_MMAP) #Check if __thread is defined execute_process( COMMAND "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_thread_storage.c" WORKING_DIRECTORY ${CMAKE_BINARY_DIR} RESULT_VARIABLE HAVE_thread_storage_run ) if(HAVE_thread_storage_run) set(HAVE_THREAD_LOCAL_STORAGE 1) else() set(HAVE_THREAD_LOCAL_STORAGE 0) endif() # Our usage of mmap is Linux-specific (flag MAP_ANONYMOUS), but kFreeBSD uses a GNU libc IF(HAVE_MMAP AND NOT "${CMAKE_SYSTEM}" MATCHES "Linux" AND NOT "${CMAKE_SYSTEM}" MATCHES "kFreeBSD" AND NOT "${CMAKE_SYSTEM}" MATCHES "GNU" AND NOT "${CMAKE_SYSTEM}" MATCHES "Darwin") SET(HAVE_MMAP 0) message(STATUS "Warning: MMAP is thought as non functional on this architecture (${CMAKE_SYSTEM})") ENDIF() if(HAVE_MMAP AND HAVE_THREAD_LOCAL_STORAGE) SET(HAVE_MMALLOC 1) else() SET(HAVE_MMALLOC 0) endif() if(WIN32) # Those files are not detected despite being present set(HAVE_UCONTEXT_H 1) set(HAVE_MAKECONTEXT 1) endif() set(CONTEXT_UCONTEXT 0) set(CONTEXT_THREADS 0) if(enable_jedule) set(HAVE_JEDULE 1) endif() if(enable_latency_bound_tracking) SET(HAVE_LATENCY_BOUND_TRACKING 1) else() SET(HAVE_LATENCY_BOUND_TRACKING 0) endif() if(enable_mallocators) SET(MALLOCATOR_IS_WANTED 1) else() SET(MALLOCATOR_IS_WANTED 0) endif() if(enable_model-checking AND HAVE_MMALLOC) SET(HAVE_MC 1) SET(MMALLOC_WANT_OVERRIDE_LEGACY 1) include(FindLibunwind) include(FindLibdw) else() if(enable_model-checking) message(STATUS "Warning: support for model-checking has been disabled because HAVE_MMALLOC is false") endif() SET(HAVE_MC 0) SET(HAVE_MMALLOC 0) SET(MMALLOC_WANT_OVERRIDE_LEGACY 0) endif() if(enable_smpi) include(FindGFortran) SET(HAVE_SMPI 1) if("${CMAKE_SYSTEM}" MATCHES "Linux") SET(USE_LIBUTIL 0) SET(HAVE_PRIVATIZATION 1) elseif("${CMAKE_SYSTEM}" MATCHES "^FreeBSD") SET(USE_LIBUTIL 0) SET(HAVE_PRIVATIZATION 0) else() message (STATUS "Warning: no support for SMPI automatic privatization on this platform") SET(HAVE_PRIVATIZATION 0) endif() endif() #-------------------------------------------------------------------------------------------------- ### Check for GNU dynamic linker CHECK_INCLUDE_FILE("dlfcn.h" HAVE_DLFCN_H) if (HAVE_DLFCN_H) if(HAVE_DLOPEN_IN_LIBDL) set(DL_LIBRARY "-ldl") endif(HAVE_DLOPEN_IN_LIBDL) execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_gnu_dynlinker.c ${DL_LIBRARY} -o test_gnu_ld WORKING_DIRECTORY ${CMAKE_BINARY_DIR} OUTPUT_VARIABLE HAVE_GNU_LD_compil ) if(HAVE_GNU_LD_compil) set(HAVE_GNU_LD 0) message(STATUS "Warning: test program toward GNU ld failed to compile:") message(STATUS "${HAVE_GNU_LD_comp_output}") else() execute_process(COMMAND ./test_gnu_ld WORKING_DIRECTORY ${CMAKE_BINARY_DIR} RESULT_VARIABLE HAVE_GNU_LD_run OUTPUT_VARIABLE var_exec ) if(NOT HAVE_GNU_LD_run) set(HAVE_GNU_LD 1) message(STATUS "We are using GNU dynamic linker") else() set(HAVE_GNU_LD 0) message(STATUS "Warning: error while checking for GNU ld:") message(STATUS "Test output: '${var_exec}'") message(STATUS "Exit status: ${HAVE_GNU_LD_run}") endif() file(REMOVE test_gnu_ld) endif() endif() #-------------------------------------------------------------------------------------------------- ### Initialize of CONTEXT THREADS if(HAVE_PTHREAD) ### Test that we have a way to create semaphores if(HAVE_SEM_OPEN_LIB) execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_open.c -lpthread -o sem_open WORKING_DIRECTORY ${CMAKE_BINARY_DIR} OUTPUT_VARIABLE HAVE_SEM_OPEN_compil ) # Test sem_open by compiling: if(HAVE_SEM_OPEN_compil) set(HAVE_SEM_OPEN 0) message(STATUS "Warning: sem_open not compilable") message(STATUS "HAVE_SEM_OPEN_comp_output: ${HAVE_SEM_OPEN_comp_output}") else() set(HAVE_SEM_OPEN 1) message(STATUS "sem_open is compilable") endif() # If we're not crosscompiling, we check by executing the program: if (HAVE_SEM_OPEN AND NOT CMAKE_CROSSCOMPILING) execute_process(COMMAND ./sem_open WORKING_DIRECTORY ${CMAKE_BINARY_DIR} RESULT_VARIABLE HAVE_SEM_OPEN_run OUTPUT_VARIABLE var_compil ) if (NOT HAVE_SEM_OPEN_run) set(HAVE_SEM_OPEN 1) message(STATUS "sem_open is executable") else() set(HAVE_SEM_OPEN 0) if(EXISTS "${CMAKE_BINARY_DIR}/sem_open") message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_open exists!") else() message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_open not exists!") endif() message(STATUS "Warning: sem_open not executable") message(STATUS "Compilation output: '${var_compil}'") message(STATUS "Exit result of sem_open: ${HAVE_SEM_OPEN_run}") endif() endif() file(REMOVE sem_open) else() set(HAVE_SEM_OPEN 0) endif() if(HAVE_SEM_INIT_LIB) execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_init.c -lpthread -o sem_init WORKING_DIRECTORY ${CMAKE_BINARY_DIR} RESULT_VARIABLE HAVE_SEM_INIT_run OUTPUT_VARIABLE HAVE_SEM_INIT_compil) # Test sem_init by compiling: if(HAVE_SEM_INIT_compil) set(HAVE_SEM_INIT 0) message(STATUS "Warning: sem_init not compilable") message(STATUS "HAVE_SEM_INIT_comp_output: ${HAVE_SEM_OPEN_comp_output}") else() set(HAVE_SEM_INIT 1) message(STATUS "sem_init is compilable") endif() # If we're not crosscompiling, we check by executing the program: if (HAVE_SEM_INIT AND NOT CMAKE_CROSSCOMPILING) execute_process(COMMAND ./sem_init WORKING_DIRECTORY ${CMAKE_BINARY_DIR} RESULT_VARIABLE HAVE_SEM_INIT_run OUTPUT_VARIABLE var_compil ) if (NOT HAVE_SEM_INIT_run) set(HAVE_SEM_INIT 1) message(STATUS "sem_init is executable") else() set(HAVE_SEM_INIT 0) if(EXISTS "${CMAKE_BINARY_DIR}/sem_init") message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_init exists!") else() message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_init not exists!") endif() message(STATUS "Warning: sem_init not executable") message(STATUS "Compilation output: '${var_compil}'") message(STATUS "Exit result of sem_init: ${HAVE_SEM_INIT_run}") endif() endif() file(REMOVE sem_init) endif() if(NOT HAVE_SEM_OPEN AND NOT HAVE_SEM_INIT) message(FATAL_ERROR "Semaphores are not usable (neither sem_open nor sem_init is both compilable and executable), but they are mandatory to threads (you may need to mount /dev).") endif() ### Test that we have a way to timewait for semaphores if(HAVE_SEM_TIMEDWAIT_LIB) execute_process( COMMAND "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_timedwait.c -lpthread" WORKING_DIRECTORY ${CMAKE_BINARY_DIR} OUTPUT_VARIABLE HAVE_SEM_TIMEDWAIT_run ) if(HAVE_SEM_TIMEDWAIT_run) set(HAVE_SEM_TIMEDWAIT 0) message(STATUS "timedwait not compilable") else() set(HAVE_SEM_TIMEDWAIT 1) message(STATUS "timedwait is compilable") endif() endif() ### HAVE_MUTEX_TIMEDLOCK if(HAVE_MUTEX_TIMEDLOCK_LIB) execute_process( COMMAND "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_mutex_timedlock.c -lpthread" WORKING_DIRECTORY ${CMAKE_BINARY_DIR} OUTPUT_VARIABLE HAVE_MUTEX_TIMEDLOCK_run ) if(HAVE_MUTEX_TIMEDLOCK_run) set(HAVE_MUTEX_TIMEDLOCK 0) message(STATUS "timedlock not compilable") else() message(STATUS "timedlock is compilable") set(HAVE_MUTEX_TIMEDLOCK 1) endif() endif() endif() # This is needed for ucontext on MacOS X: if(CMAKE_SYSTEM_NAME MATCHES "Darwin") add_definitions(-D_XOPEN_SOURCE=700 -D_DARWIN_C_SOURCE) endif() if(WIN32) # We always provide our own implementation of ucontext on Windows. try_compile(HAVE_UCONTEXT ${CMAKE_BINARY_DIR} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_AC_CHECK_MCSC.c COMPILE_DEFINITIONS _XBT_WIN32 INCLUDE_DIRECTORIES ${CMAKE_HOME_DIRECTORY}/src/include ${CMAKE_HOME_DIRECTORY}/src/xbt ) else() # We always provide our own implementation of ucontext on Windows. try_compile(HAVE_UCONTEXT ${CMAKE_BINARY_DIR} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_AC_CHECK_MCSC.c) endif() #If can have both context if(HAVE_UCONTEXT) set(CONTEXT_UCONTEXT 1) message("-- Support for ucontext factory") endif() if(HAVE_PTHREAD) set(CONTEXT_THREADS 1) message("-- Support for thread context factory") endif() ############### ## GIT version check ## if(EXISTS ${CMAKE_HOME_DIRECTORY}/.git/) execute_process(COMMAND git remote COMMAND head -n 1 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/ OUTPUT_VARIABLE remote RESULT_VARIABLE ret ) string(REPLACE "\n" "" remote "${remote}") #message(STATUS "Git remote: ${remote}") execute_process(COMMAND git config --get remote.${remote}.url WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/ OUTPUT_VARIABLE url RESULT_VARIABLE ret ) string(REPLACE "\n" "" url "${url}") #message(STATUS "Git url: ${url}") if(url) execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log --pretty=oneline --abbrev-commit -1 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/ OUTPUT_VARIABLE GIT_VERSION RESULT_VARIABLE ret ) string(REPLACE "\n" "" GIT_VERSION "${GIT_VERSION}") message(STATUS "Git version: ${GIT_VERSION}") execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log -n 1 --pretty=format:%ai . WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/ OUTPUT_VARIABLE GIT_DATE RESULT_VARIABLE ret ) string(REPLACE "\n" "" GIT_DATE "${GIT_DATE}") message(STATUS "Git date: ${GIT_DATE}") string(REGEX REPLACE " .*" "" GIT_VERSION "${GIT_VERSION}") execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log --pretty=format:%H -1 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/ OUTPUT_VARIABLE SIMGRID_GITHASH RESULT_VARIABLE ret ) string(REPLACE "\n" "" SIMGRID_GITHASH "${SIMGRID_GITHASH}") endif() elseif(EXISTS ${CMAKE_HOME_DIRECTORY}/.gitversion) FILE(STRINGS ${CMAKE_HOME_DIRECTORY}/.gitversion GIT_VERSION) endif() if(GIT_VERSION) set(SIMGRID_VERSION_BANNER "${SIMGRID_VERSION_BANNER} at commit ${GIT_VERSION}") endif() if(GIT_DATE) set(SIMGRID_VERSION_BANNER "${SIMGRID_VERSION_BANNER} (${GIT_DATE})") endif() #-------------------------------------------------------------------------------------------------- set(makecontext_CPPFLAGS_2 "") if(HAVE_MAKECONTEXT OR WIN32) set(makecontext_CPPFLAGS "-DTEST_makecontext") if(CMAKE_SYSTEM_NAME MATCHES "Darwin") set(makecontext_CPPFLAGS_2 "-D_XOPEN_SOURCE=700") endif() if(WIN32) if(ARCH_32_BITS) set(makecontext_CPPFLAGS "-DTEST_makecontext -D_I_X86_") else() set(makecontext_CPPFLAGS "-DTEST_makecontext -D_AMD64_") endif() set(makecontext_CPPFLAGS_2 "-D_XBT_WIN32 -I${CMAKE_HOME_DIRECTORY}/src/include -I${CMAKE_HOME_DIRECTORY}/src/xbt") endif() file(REMOVE ${CMAKE_BINARY_DIR}/conftestval) if(CMAKE_CROSSCOMPILING) set(RUN_makecontext_VAR "cross") set(COMPILE_makecontext_VAR "cross") else() try_run(RUN_makecontext_VAR COMPILE_makecontext_VAR ${CMAKE_BINARY_DIR} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_stacksetup.c COMPILE_DEFINITIONS "${makecontext_CPPFLAGS} ${makecontext_CPPFLAGS_2}" ) endif() if(EXISTS ${CMAKE_BINARY_DIR}/conftestval) file(READ ${CMAKE_BINARY_DIR}/conftestval MAKECONTEXT_ADDR_SIZE) string(REPLACE "\n" "" MAKECONTEXT_ADDR_SIZE "${MAKECONTEXT_ADDR_SIZE}") string(REGEX MATCH ;^.*,;MAKECONTEXT_ADDR "${MAKECONTEXT_ADDR_SIZE}") string(REGEX MATCH ;,.*$; MAKECONTEXT_SIZE "${MAKECONTEXT_ADDR_SIZE}") string(REPLACE "," "" makecontext_addr "${MAKECONTEXT_ADDR}") string(REPLACE "," "" makecontext_size "${MAKECONTEXT_SIZE}") set(pth_skaddr_makecontext "#define pth_skaddr_makecontext(skaddr,sksize) (${makecontext_addr})") set(pth_sksize_makecontext "#define pth_sksize_makecontext(skaddr,sksize) (${makecontext_size})") else() # message(FATAL_ERROR "makecontext is not compilable") endif() endif() #-------------------------------------------------------------------------------------------------- ### check for stackgrowth if (NOT CMAKE_CROSSCOMPILING) try_run(RUN_makecontext_VAR COMPILE_makecontext_VAR ${CMAKE_BINARY_DIR} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_stackgrowth.c RUN_OUTPUT_VARIABLE stack ) endif() if("${stack}" STREQUAL "down") set(PTH_STACKGROWTH "-1") elseif("${stack}" STREQUAL "up") set(PTH_STACKGROWTH "1") else() if("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "x86_64") set(PTH_STACKGROWTH "-1") elseif("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "i686") set(PTH_STACKGROWTH "-1") else() message(ERROR "Could not figure the stack direction.") endif() endif() ############### ## System checks ## #SG_CONFIGURE_PART([System checks...]) #AC_PROG_CC(xlC gcc cc) -auto #AM_SANITY_CHECK -auto #AC_PROG_MAKE_SET #AC_CHECK_VA_COPY set(diff_va "va_copy((d),(s))" "VA_COPY((d),(s))" "__va_copy((d),(s))" "__builtin_va_copy((d),(s))" "do { (d) = (s)\; } while (0)" "do { *(d) = *(s)\; } while (0)" "memcpy((void *)&(d), (void *)&(s), sizeof(s))" "memcpy((void *)(d), (void *)(s), sizeof(*(s)))" ) foreach(fct ${diff_va}) write_file("${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_va_copy.c" "#include #include #include #define DO_VA_COPY(d,s) ${fct} void test(char *str, ...) { va_list ap, ap2; int i; va_start(ap, str); DO_VA_COPY(ap2, ap); for (i = 1; i <= 9; i++) { int k = (int)va_arg(ap, int); if (k != i) abort(); } DO_VA_COPY(ap, ap2); for (i = 1; i <= 9; i++) { int k = (int)va_arg(ap, int); if (k != i) abort(); } va_end(ap); } int main(void) { test(\"test\", 1, 2, 3, 4, 5, 6, 7, 8, 9); exit(0); }" ) execute_process( COMMAND ${CMAKE_C_COMPILER} "${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_va_copy.c" WORKING_DIRECTORY ${CMAKE_BINARY_DIR} RESULT_VARIABLE COMPILE_VA_NULL_VAR OUTPUT_QUIET ERROR_QUIET ) if(NOT COMPILE_VA_NULL_VAR) string(REGEX REPLACE "\;" "" fctbis ${fct}) if(${fctbis} STREQUAL "va_copy((d),(s))") set(HAVE_VA_COPY 1) set(ac_cv_va_copy "C99") set(__VA_COPY_USE_C99 "va_copy((d),(s))") endif() if(${fctbis} STREQUAL "VA_COPY((d),(s))") set(ac_cv_va_copy "GCM") set(__VA_COPY_USE_GCM "VA_COPY((d),(s))") endif() if(${fctbis} STREQUAL "__va_copy((d),(s))") set(ac_cv_va_copy "GCH") set(__VA_COPY_USE_GCH "__va_copy((d),(s))") endif() if(${fctbis} STREQUAL "__builtin_va_copy((d),(s))") set(ac_cv_va_copy "GCB") set(__VA_COPY_USE_GCB "__builtin_va_copy((d),(s))") endif() if(${fctbis} STREQUAL "do { (d) = (s) } while (0)") set(ac_cv_va_copy "ASS") set(__VA_COPY_USE_ASS "do { (d) = (s); } while (0)") endif() if(${fctbis} STREQUAL "do { *(d) = *(s) } while (0)") set(ac_cv_va_copy "ASP") set(__VA_COPY_USE_ASP "do { *(d) = *(s); } while (0)") endif() if(${fctbis} STREQUAL "memcpy((void *)&(d), (void *)&(s), sizeof(s))") set(ac_cv_va_copy "CPS") set(__VA_COPY_USE_CPS "memcpy((void *)&(d), (void *)&(s), sizeof(s))") endif() if(${fctbis} STREQUAL "memcpy((void *)(d), (void *)(s), sizeof(*(s)))") set(ac_cv_va_copy "CPP") set(__VA_COPY_USE_CPP "memcpy((void *)(d), (void *)(s), sizeof(*(s)))") endif() if(NOT STATUS_OK) set(__VA_COPY_USE "__VA_COPY_USE_${ac_cv_va_copy}(d, s)") endif() set(STATUS_OK "1") endif() endforeach(fct ${diff_va}) #-------------------------------------------------------------------------------------------------- ### check for a working snprintf if(HAVE_SNPRINTF AND HAVE_VSNPRINTF OR WIN32) if(WIN32) #set(HAVE_SNPRINTF 1) #set(HAVE_VSNPRINTF 1) endif() if(CMAKE_CROSSCOMPILING) set(RUN_SNPRINTF_FUNC "cross") #set(PREFER_PORTABLE_SNPRINTF 1) else() try_run(RUN_SNPRINTF_FUNC_VAR COMPILE_SNPRINTF_FUNC_VAR ${CMAKE_BINARY_DIR} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_snprintf.c ) endif() if(CMAKE_CROSSCOMPILING) set(RUN_VSNPRINTF_FUNC "cross") set(PREFER_PORTABLE_VSNPRINTF 1) else() try_run(RUN_VSNPRINTF_FUNC_VAR COMPILE_VSNPRINTF_FUNC_VAR ${CMAKE_BINARY_DIR} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_vsnprintf.c ) endif() set(PREFER_PORTABLE_SNPRINTF 0) if(RUN_VSNPRINTF_FUNC_VAR MATCHES "FAILED_TO_RUN") set(PREFER_PORTABLE_SNPRINTF 1) endif() if(RUN_SNPRINTF_FUNC_VAR MATCHES "FAILED_TO_RUN") set(PREFER_PORTABLE_SNPRINTF 1) endif() endif() ### check for asprintf function familly if(HAVE_ASPRINTF) SET(simgrid_need_asprintf "") SET(NEED_ASPRINTF 0) else() SET(simgrid_need_asprintf "#define SIMGRID_NEED_ASPRINTF 1") SET(NEED_ASPRINTF 1) endif() if(HAVE_VASPRINTF) SET(simgrid_need_vasprintf "") SET(NEED_VASPRINTF 0) else() SET(simgrid_need_vasprintf "#define SIMGRID_NEED_VASPRINTF 1") SET(NEED_VASPRINTF 1) endif() ### check for addr2line find_path(ADDR2LINE NAMES addr2line PATHS NO_DEFAULT_PATHS ) if(ADDR2LINE) set(ADDR2LINE "${ADDR2LINE}/addr2line") endif() ### File to create configure_file("${CMAKE_HOME_DIRECTORY}/src/context_sysv_config.h.in" "${CMAKE_BINARY_DIR}/src/context_sysv_config.h" @ONLY IMMEDIATE) SET( CMAKEDEFINE "#cmakedefine" ) configure_file("${CMAKE_HOME_DIRECTORY}/tools/cmake/src/internal_config.h.in" "${CMAKE_BINARY_DIR}/src/internal_config.h" @ONLY IMMEDIATE) configure_file("${CMAKE_BINARY_DIR}/src/internal_config.h" "${CMAKE_BINARY_DIR}/src/internal_config.h" @ONLY IMMEDIATE) configure_file("${CMAKE_HOME_DIRECTORY}/include/simgrid_config.h.in" "${CMAKE_BINARY_DIR}/include/simgrid_config.h" @ONLY IMMEDIATE) set(top_srcdir "${CMAKE_HOME_DIRECTORY}") set(srcdir "${CMAKE_HOME_DIRECTORY}/src") set(bindir "${CMAKE_BINARY_DIR}") ### Script used when simgrid is installed set(exec_prefix ${CMAKE_INSTALL_PREFIX}) set(includeflag "-I${CMAKE_INSTALL_PREFIX}/include -I${CMAKE_INSTALL_PREFIX}/include/smpi") set(includedir "${CMAKE_INSTALL_PREFIX}/include") set(libdir ${exec_prefix}/lib) set(CMAKE_SMPI_COMMAND "export LD_LIBRARY_PATH=\"${CMAKE_INSTALL_PREFIX}/lib") if(NS3_LIBRARY_PATH) set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}") endif() set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"") file(READ ${CMAKE_HOME_DIRECTORY}/src/smpi/smpitools.sh SMPITOOLS_SH) configure_file(${CMAKE_HOME_DIRECTORY}/include/smpi/mpif.h.in ${CMAKE_BINARY_DIR}/include/smpi/mpif.h @ONLY) configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpicc.in ${CMAKE_BINARY_DIR}/bin/smpicc @ONLY) configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpicxx.in ${CMAKE_BINARY_DIR}/bin/smpicxx @ONLY) configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpiff.in ${CMAKE_BINARY_DIR}/bin/smpiff @ONLY) configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpif90.in ${CMAKE_BINARY_DIR}/bin/smpif90 @ONLY) configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpirun.in ${CMAKE_BINARY_DIR}/bin/smpirun @ONLY) ### Script used when simgrid is compiling set(includeflag "-I${CMAKE_HOME_DIRECTORY}/include -I${CMAKE_HOME_DIRECTORY}/include/smpi") set(includeflag "${includeflag} -I${CMAKE_BINARY_DIR}/include -I${CMAKE_BINARY_DIR}/include/smpi") set(includedir "${CMAKE_HOME_DIRECTORY}/include") set(exec_prefix "${CMAKE_BINARY_DIR}/smpi_script/") set(CMAKE_SMPI_COMMAND "export LD_LIBRARY_PATH=\"${CMAKE_BINARY_DIR}/lib") if(NS3_LIBRARY_PATH) set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}") endif() set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"") set(libdir "${CMAKE_BINARY_DIR}/lib") configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpicc.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpicc @ONLY) configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpicxx.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpicxx @ONLY) configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpiff.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpiff @ONLY) configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpif90.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpif90 @ONLY) configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpirun.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpirun @ONLY) set(top_builddir ${CMAKE_HOME_DIRECTORY}) if(NOT WIN32) execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpicc) execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpicxx) execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpiff) execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpif90) execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpirun) execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/smpi_script/bin/smpicc) execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/smpi_script/bin/smpicxx) execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/smpi_script/bin/smpiff) execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/smpi_script/bin/smpif90) execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/smpi_script/bin/smpirun) endif() set(generated_headers_to_install ${CMAKE_CURRENT_BINARY_DIR}/include/smpi/mpif.h ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid_config.h ) set(generated_headers ${CMAKE_CURRENT_BINARY_DIR}/src/context_sysv_config.h ${CMAKE_CURRENT_BINARY_DIR}/src/internal_config.h ) set(generated_files_to_clean ${generated_headers} ${generated_headers_to_install} ${CMAKE_BINARY_DIR}/bin/smpicc ${CMAKE_BINARY_DIR}/bin/smpicxx ${CMAKE_BINARY_DIR}/bin/smpiff ${CMAKE_BINARY_DIR}/bin/smpif90 ${CMAKE_BINARY_DIR}/bin/smpirun ${CMAKE_BINARY_DIR}/bin/colorize ${CMAKE_BINARY_DIR}/bin/simgrid_update_xml ${CMAKE_BINARY_DIR}/examples/smpi/tracing/smpi_traced.trace ) if(NOT "${CMAKE_BINARY_DIR}" STREQUAL "${CMAKE_HOME_DIRECTORY}") configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allReduce.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_barrier.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_bcast.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_with_isend.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_alltoall.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoall.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_alltoallv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoallv.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_waitall.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_waitall.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_reducescatter.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_reducescatter.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_gather.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_gather.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allgatherv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allgatherv.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/teshsuite/smpi/hostfile ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/description_file ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/description_file COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/README ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/README COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/smpi_replay.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/smpi_replay.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt COPYONLY) configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt COPYONLY) set(generated_files_to_clean ${generated_files_to_clean} ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoall.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoallv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_waitall.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_gather.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allgatherv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_reducescatter.txt ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/description_file ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/README ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/smpi_replay.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt ) endif() SET_DIRECTORY_PROPERTIES(PROPERTIES ADDITIONAL_MAKE_CLEAN_FILES "${generated_files_to_clean}") configure_file("${CMAKE_HOME_DIRECTORY}/tools/cmake/src/simgrid.nsi.in" "${CMAKE_BINARY_DIR}/simgrid.nsi" @ONLY IMMEDIATE) ### Define source packages for Libs include(${CMAKE_HOME_DIRECTORY}/tools/cmake/DefinePackages.cmake) ### Build some Maintainer files include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MaintainerMode.cmake) include(${CMAKE_HOME_DIRECTORY}/tools/cmake/UnitTesting.cmake) ### Setup gcc & clang flags if (NOT MSVC) include(${CMAKE_HOME_DIRECTORY}/tools/cmake/GCCFlags.cmake) endif() ### Make Libs if(NOT WIN32) include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MakeLib.cmake) else() include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MakeLibWin.cmake) endif() if(enable_java) include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Java.cmake) endif() ### Make tests if(enable_memcheck_xml) set(enable_memcheck true) endif() INCLUDE(CTest) ENABLE_TESTING() include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Tests.cmake) include(${CMAKE_HOME_DIRECTORY}/tools/cmake/CTestConfig.cmake) ### Define subdirectories include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MakeExe.cmake) ### Setup the distrib include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Distrib.cmake) ### Build the doc (Windows downloads the doc instead of regenerating) # if(NOT WIN32) include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Documentation.cmake) else() find_program(WGET_PROGRAM NAMES wget) message(STATUS "wget: ${WGET_PROGRAM}") if(WGET_PROGRAM) ADD_CUSTOM_TARGET(documentation COMMENT "Downloading the SimGrid documentation..." COMMAND ${WGET_PROGRAM} -r -np -nH -nd http://simgrid.gforge.inria.fr/simgrid/${release_version}/doc/ WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/doc/html ) endif() endif() ### Print ARGS include(${CMAKE_HOME_DIRECTORY}/tools/cmake/PrintArgs.cmake) INCLUDE(Dart)