tools/cmake/CompleteInFiles.cmake

   1 set(CMAKE_MODULE_PATH
   2   ${CMAKE_MODULE_PATH}
   3   ${CMAKE_HOME_DIRECTORY}/tools/cmake/Modules
   4   )
   5
   6 # x86_64
   7 # x86
   8 # i.86
   9
  10 ### Determine the assembly flavor that we need today
  11 include(CMakeDetermineSystem)
  12 IF(CMAKE_SYSTEM_PROCESSOR MATCHES ".86|AMD64|amd64")
  13   IF(${ARCH_32_BITS})
  14     message(STATUS "System processor: i686 (${CMAKE_SYSTEM_PROCESSOR}, 32 bits)")
  15     set(PROCESSOR_i686 1)
  16   ELSE()
  17     message(STATUS "System processor: x86_64 (${CMAKE_SYSTEM_PROCESSOR}, 64 bits)")
  18     set(PROCESSOR_x86_64 1)
  19   ENDIF()
  20   if (NOT MSVC)
  21     message(STATUS "Disable fast raw contextes on Microsoft Visual.")
  22   else()
  23     set(HAVE_RAWCTX 1)
  24   endif()
  25
  26 ELSEIF(CMAKE_SYSTEM_PROCESSOR MATCHES "^alpha")
  27   message(STATUS "System processor: alpha")
  28
  29 ELSEIF(CMAKE_SYSTEM_PROCESSOR MATCHES "^arm")
  30   # Subdir is "arm" for both big-endian (arm) and little-endian (armel).
  31   message(STATUS "System processor: arm")
  32
  33 ELSEIF(CMAKE_SYSTEM_PROCESSOR MATCHES "^mips")
  34   # mips* machines are bi-endian mostly so processor does not tell
  35   # endianess of the underlying system.
  36   message(STATUS "System processor: ${CMAKE_SYSTEM_PROCESSOR}" "mips" "mipsel" "mipseb")
  37
  38 ELSEIF(CMAKE_SYSTEM_PROCESSOR MATCHES "^(powerpc|ppc)64")
  39   message(STATUS "System processor: ppc64")
  40
  41 ELSEIF(CMAKE_SYSTEM_PROCESSOR MATCHES "^(powerpc|ppc)")
  42   message(STATUS "System processor: ppc")
  43
  44 ELSEIF(CMAKE_SYSTEM_PROCESSOR MATCHES "^sparc")
  45   # Both flavours can run on the same processor
  46   message(STATUS "System processor: ${CMAKE_SYSTEM_PROCESSOR}" "sparc" "sparcv9")
  47
  48 ELSEIF(CMAKE_SYSTEM_PROCESSOR MATCHES "^(parisc|hppa)")
  49   message(STATUS "System processor: parisc" "parisc64")
  50
  51 ELSEIF(CMAKE_SYSTEM_PROCESSOR MATCHES "^s390")
  52   # s390 binaries can run on s390x machines
  53   message(STATUS "System processor: ${CMAKE_SYSTEM_PROCESSOR}" "s390" "s390x")
  54
  55 ELSEIF(CMAKE_SYSTEM_PROCESSOR MATCHES "^sh")
  56   message(STATUS "System processor: sh")
  57
  58 ELSE() #PROCESSOR NOT FOUND
  59   message(STATUS "PROCESSOR NOT FOUND: ${CMAKE_SYSTEM_PROCESSOR}")
  60
  61 ENDIF()
  62
  63 if(ARCH_32_BITS)
  64   set(MPI_ADDRESS_SIZE 4)
  65 else()
  66   set(MPI_ADDRESS_SIZE 8)
  67 endif()
  68
  69 message(STATUS "Cmake version ${CMAKE_MAJOR_VERSION}.${CMAKE_MINOR_VERSION}")
  70
  71 include(CheckFunctionExists)
  72 include(CheckTypeSize)
  73 include(CheckIncludeFile)
  74 include(CheckIncludeFiles)
  75 include(CheckLibraryExists)
  76 include(CheckSymbolExists)
  77 include(TestBigEndian)
  78 TEST_BIG_ENDIAN(BIGENDIAN)
  79
  80 include(FindGraphviz)
  81 include(FindLibSigc++)
  82
  83 if(enable_java)
  84   find_package(Java REQUIRED COMPONENTS Runtime Development)
  85   find_package(JNI REQUIRED)
  86   message("-- [Java] JNI found: ${JNI_FOUND}")
  87   message("-- [Java] JNI include dirs: ${JNI_INCLUDE_DIRS}")
  88   if(enable_maintainer_mode)
  89     find_package(SWIG REQUIRED)
  90     include(UseSWIG)
  91     message("-- [Java] Swig found: ${SWIG_FOUND} (version ${SWIG_VERSION})")
  92   endif()
  93   set(HAVE_Java 1)
  94 endif()
  95 if(enable_scala)
  96   find_package(Scala REQUIRED)
  97   message("-- [Scala] scalac found: ${SCALA_COMPILE}")
  98   set(HAVE_Scala 1)
  99 endif()
 100 if(enable_lua)
 101   include(FindLua51Simgrid)
 102 endif()
 103
 104 set(HAVE_NS3 0)
 105 if(enable_ns3)
 106   include(FindNS3)
 107   if (NOT HAVE_NS3)
 108     message(FATAL_ERROR "Cannot find NS3. Please install it (apt-get install ns3 libns3-dev) or disable that cmake option")
 109   endif()
 110 endif()
 111
 112 find_package(Boost 1.48)
 113 if(Boost_FOUND)
 114   include_directories(${Boost_INCLUDE_DIRS})
 115 else()
 116   if(APPLE)
 117     message(FATAL_ERROR "Failed to find Boost libraries (Try to install them with 'sudo fink install boost1.53.nopython')")
 118   else()
 119     message(FATAL_ERROR "Failed to find Boost libraries."
 120                         "Did you install libboost-dev and libboost-context-dev?"
 121                         "(libboost-context-dev is optional)")
 122   endif()
 123 endif()
 124
 125 # Try again to see if we have libboost-context
 126 find_package(Boost 1.42 COMPONENTS context)
 127 set(Boost_FOUND 1) # We don't care of whether this component is missing
 128
 129 if(Boost_FOUND AND Boost_CONTEXT_FOUND)
 130   # We should use feature detection for this instead:
 131   if (Boost_VERSION LESS 105600)
 132     message("Found Boost.Context API v1")
 133     set(HAVE_BOOST_CONTEXT 1)
 134   else()
 135     message("Found Boost.Context API v2")
 136     set(HAVE_BOOST_CONTEXT 2)
 137   endif()
 138 else()
 139   message ("   boost        : found.")
 140   message ("   boost-context: missing. Install libboost-context-dev for this optional feature.")
 141   set(HAVE_BOOST_CONTEXT 0)
 142 endif()
 143
 144 # Checks for header libraries functions.
 145 CHECK_LIBRARY_EXISTS(dl      dlopen                  "" HAVE_DLOPEN_IN_LIBDL)
 146 CHECK_LIBRARY_EXISTS(execinfo backtrace              "" HAVE_BACKTRACE_IN_LIBEXECINFO)
 147 CHECK_LIBRARY_EXISTS(pthread pthread_create          "" HAVE_PTHREAD)
 148 CHECK_LIBRARY_EXISTS(pthread sem_init                "" HAVE_SEM_INIT_LIB)
 149 CHECK_LIBRARY_EXISTS(pthread sem_open                "" HAVE_SEM_OPEN_LIB)
 150 CHECK_LIBRARY_EXISTS(pthread sem_timedwait           "" HAVE_SEM_TIMEDWAIT_LIB)
 151 CHECK_LIBRARY_EXISTS(pthread pthread_mutex_timedlock "" HAVE_MUTEX_TIMEDLOCK_LIB)
 152 CHECK_LIBRARY_EXISTS(rt      clock_gettime           "" HAVE_POSIX_GETTIME)
 153
 154 if(CMAKE_SYSTEM_NAME MATCHES "Darwin")
 155   set(CMAKE_REQUIRED_DEFINITIONS "-D_XOPEN_SOURCE=700 -D_DARWIN_C_SOURCE")
 156 elseif(MINGW)
 157   add_definitions(-D__USE_MINGW_ANSI_STDIO=1)
 158   set(CMAKE_REQUIRED_DEFINITIONS "-D__USE_MINGW_ANSI_STDIO=1")
 159 else()
 160   set(CMAKE_REQUIRED_DEFINITIONS "-D_GNU_SOURCE")
 161 endif()
 162
 163 CHECK_INCLUDE_FILES("time.h;sys/time.h" TIME_WITH_SYS_TIME)
 164 CHECK_INCLUDE_FILES("stdlib.h;stdarg.h;string.h;float.h" STDC_HEADERS)
 165 CHECK_INCLUDE_FILE("pthread.h" HAVE_PTHREAD_H)
 166 CHECK_INCLUDE_FILE("valgrind/valgrind.h" HAVE_VALGRIND_VALGRIND_H)
 167 CHECK_INCLUDE_FILE("socket.h" HAVE_SOCKET_H)
 168 CHECK_INCLUDE_FILE("sys/socket.h" HAVE_SYS_SOCKET_H)
 169 CHECK_INCLUDE_FILE("stat.h" HAVE_STAT_H)
 170 CHECK_INCLUDE_FILE("sys/stat.h" HAVE_SYS_STAT_H)
 171 CHECK_INCLUDE_FILE("windows.h" HAVE_WINDOWS_H)
 172 CHECK_INCLUDE_FILE("errno.h" HAVE_ERRNO_H)
 173 CHECK_INCLUDE_FILE("unistd.h" HAVE_UNISTD_H)
 174 CHECK_INCLUDE_FILE("execinfo.h" HAVE_EXECINFO_H)
 175 CHECK_INCLUDE_FILE("signal.h" HAVE_SIGNAL_H)
 176 CHECK_INCLUDE_FILE("sys/time.h" HAVE_SYS_TIME_H)
 177 CHECK_INCLUDE_FILE("sys/param.h" HAVE_SYS_PARAM_H)
 178 CHECK_INCLUDE_FILE("sys/sysctl.h" HAVE_SYS_SYSCTL_H)
 179 CHECK_INCLUDE_FILE("time.h" HAVE_TIME_H)
 180 CHECK_INCLUDE_FILE("inttypes.h" HAVE_INTTYPES_H)
 181 CHECK_INCLUDE_FILE("memory.h" HAVE_MEMORY_H)
 182 CHECK_INCLUDE_FILE("stdlib.h" HAVE_STDLIB_H)
 183 CHECK_INCLUDE_FILE("strings.h" HAVE_STRINGS_H)
 184 CHECK_INCLUDE_FILE("string.h" HAVE_STRING_H)
 185 CHECK_INCLUDE_FILE("ucontext.h" HAVE_UCONTEXT_H)
 186 CHECK_INCLUDE_FILE("stdio.h" HAVE_STDIO_H)
 187 CHECK_INCLUDE_FILE("linux/futex.h" HAVE_FUTEX_H)
 188
 189 CHECK_FUNCTION_EXISTS(gettimeofday HAVE_GETTIMEOFDAY)
 190 CHECK_FUNCTION_EXISTS(nanosleep HAVE_NANOSLEEP)
 191 CHECK_FUNCTION_EXISTS(getdtablesize HAVE_GETDTABLESIZE)
 192 CHECK_FUNCTION_EXISTS(sysconf HAVE_SYSCONF)
 193 CHECK_FUNCTION_EXISTS(readv HAVE_READV)
 194 CHECK_FUNCTION_EXISTS(popen HAVE_POPEN)
 195 CHECK_FUNCTION_EXISTS(signal HAVE_SIGNAL)
 196
 197 CHECK_SYMBOL_EXISTS(snprintf stdio.h HAVE_SNPRINTF)
 198 CHECK_SYMBOL_EXISTS(vsnprintf stdio.h HAVE_VSNPRINTF)
 199 CHECK_SYMBOL_EXISTS(asprintf stdio.h HAVE_ASPRINTF)
 200 CHECK_SYMBOL_EXISTS(vasprintf stdio.h HAVE_VASPRINTF)
 201
 202 if(MINGW)
 203   # The detection of asprintf fails on MinGW, assumingly because it's
 204   # defined as an inline function in stdio.h instead of a regular
 205   # function. So force the result to be 1 despite of the test.
 206   set(HAVE_ASPRINTF 1)
 207   set(HAVE_VASPRINTF 1)
 208 endif()
 209
 210 CHECK_FUNCTION_EXISTS(makecontext HAVE_MAKECONTEXT)
 211 CHECK_FUNCTION_EXISTS(mmap HAVE_MMAP)
 212 CHECK_FUNCTION_EXISTS(process_vm_readv HAVE_PROCESS_VM_READV)
 213 CHECK_FUNCTION_EXISTS(strdup SIMGRID_HAVE_STRDUP)
 214 CHECK_FUNCTION_EXISTS(_strdup SIMGRID_HAVE__STRDUP)
 215
 216 #Check if __thread is defined
 217 execute_process(
 218   COMMAND "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_thread_storage.c"
 219   WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
 220   RESULT_VARIABLE HAVE_thread_storage_run
 221   )
 222
 223 if(HAVE_thread_storage_run)
 224   set(HAVE_THREAD_LOCAL_STORAGE 1)
 225 else()
 226   set(HAVE_THREAD_LOCAL_STORAGE 0)
 227 endif()
 228
 229 # Our usage of mmap is Linux-specific (flag MAP_ANONYMOUS), but kFreeBSD uses a GNU libc
 230 IF(NOT "${CMAKE_SYSTEM}" MATCHES "Linux" AND NOT "${CMAKE_SYSTEM}" MATCHES "kFreeBSD" AND NOT "${CMAKE_SYSTEM}" MATCHES "GNU" AND NOT  "${CMAKE_SYSTEM}" MATCHES "Darwin")
 231   SET(HAVE_MMAP 0)
 232   message(STATUS "Warning: MMAP is thought as non functional on this architecture (${CMAKE_SYSTEM})")
 233 ENDIF()
 234
 235 if(HAVE_MMAP AND HAVE_THREAD_LOCAL_STORAGE)
 236   SET(HAVE_MMALLOC 1)
 237 else()
 238   SET(HAVE_MMALLOC 0)
 239 endif()
 240
 241
 242 if(WIN32) #THOSE FILES ARE FUNCTIONS ARE NOT DETECTED BUT THEY SHOULD...
 243   set(HAVE_UCONTEXT_H 1)
 244   set(HAVE_MAKECONTEXT 1)
 245   set(HAVE_SNPRINTF 1)
 246   set(HAVE_VSNPRINTF 1)
 247 endif()
 248
 249 set(CONTEXT_UCONTEXT 0)
 250 SET(CONTEXT_THREADS 0)
 251
 252 if(enable_jedule)
 253   SET(HAVE_JEDULE 1)
 254 endif()
 255
 256 if(enable_latency_bound_tracking)
 257   SET(HAVE_LATENCY_BOUND_TRACKING 1)
 258 else()
 259   SET(HAVE_LATENCY_BOUND_TRACKING 0)
 260 endif()
 261
 262 if(enable_mallocators)
 263   SET(MALLOCATOR_IS_WANTED 1)
 264 else()
 265   SET(MALLOCATOR_IS_WANTED 0)
 266 endif()
 267
 268 if(enable_model-checking AND HAVE_MMALLOC)
 269   SET(HAVE_MC 1)
 270   SET(MMALLOC_WANT_OVERRIDE_LEGACY 1)
 271   include(FindLibunwind)
 272   include(FindLibdw)
 273 else()
 274   if(enable_model-checking)
 275     message(STATUS "Warning: support for model-checking has been disabled because HAVE_MMALLOC is false")
 276   endif()
 277   SET(HAVE_MC 0)
 278   SET(HAVE_MMALLOC 0)
 279   SET(MMALLOC_WANT_OVERRIDE_LEGACY 0)
 280 endif()
 281
 282 if(enable_smpi)
 283   include(FindGFortran)
 284   #really checks for objdump for privatization
 285   find_package(BinUtils QUIET)
 286   SET(HAVE_SMPI 1)
 287
 288   if( NOT "${CMAKE_OBJDUMP}" MATCHES "CMAKE_OBJDUMP-NOTFOUND" AND HAVE_MMAP)
 289     SET(HAVE_PRIVATIZATION 1)
 290   else()
 291     SET(HAVE_PRIVATIZATION 0)
 292   endif()
 293 endif()
 294
 295 #--------------------------------------------------------------------------------------------------
 296 ### Check for some architecture dependent values
 297 CHECK_TYPE_SIZE(int SIZEOF_INT)
 298 CHECK_TYPE_SIZE(void* SIZEOF_VOIDP)
 299
 300 #--------------------------------------------------------------------------------------------------
 301 ### Check for GNU dynamic linker
 302 CHECK_INCLUDE_FILE("dlfcn.h" HAVE_DLFCN_H)
 303 if (HAVE_DLFCN_H)
 304     if(HAVE_DLOPEN_IN_LIBDL)
 305       set(DL_LIBRARY "-ldl")
 306     endif(HAVE_DLOPEN_IN_LIBDL)
 307     execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_gnu_dynlinker.c ${DL_LIBRARY} -o test_gnu_ld
 308       WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
 309       OUTPUT_VARIABLE HAVE_GNU_LD_compil
 310     )
 311     if(HAVE_GNU_LD_compil)
 312       set(HAVE_GNU_LD 0)
 313       message(STATUS "Warning: test program toward GNU ld failed to compile:")
 314       message(STATUS "${HAVE_GNU_LD_comp_output}")
 315     else()
 316
 317       execute_process(COMMAND ./test_gnu_ld
 318           WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
 319           RESULT_VARIABLE HAVE_GNU_LD_run
 320           OUTPUT_VARIABLE var_exec
 321       )
 322
 323       if(NOT HAVE_GNU_LD_run)
 324         set(HAVE_GNU_LD 1)
 325         message(STATUS "We are using GNU dynamic linker")
 326       else()
 327         set(HAVE_GNU_LD 0)
 328         message(STATUS "Warning: error while checking for GNU ld:")
 329         message(STATUS "Test output: '${var_exec}'")
 330         message(STATUS "Exit status: ${HAVE_GNU_LD_run}")
 331       endif()
 332       file(REMOVE test_gnu_ld)
 333     endif()
 334 endif()
 335
 336
 337 #--------------------------------------------------------------------------------------------------
 338 ### Initialize of CONTEXT THREADS
 339
 340 if(HAVE_PTHREAD)
 341   set(pthread 1)
 342 elseif(pthread)
 343   set(pthread 0)
 344 endif()
 345
 346 if(HAVE_PTHREAD)
 347   ### Test that we have a way to create semaphores
 348
 349   if(HAVE_SEM_OPEN_LIB)
 350     execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_open.c -lpthread -o sem_open
 351     WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
 352     OUTPUT_VARIABLE HAVE_SEM_OPEN_compil
 353     )
 354
 355     # Test sem_open by compiling:
 356     if(HAVE_SEM_OPEN_compil)
 357       set(HAVE_SEM_OPEN 0)
 358       message(STATUS "Warning: sem_open not compilable")
 359       message(STATUS "HAVE_SEM_OPEN_comp_output: ${HAVE_SEM_OPEN_comp_output}")
 360     else()
 361       set(HAVE_SEM_OPEN 1)
 362       message(STATUS "sem_open is compilable")
 363     endif()
 364
 365     # If we're not crosscompiling, we check by executing the program:
 366     if (HAVE_SEM_OPEN AND NOT CMAKE_CROSSCOMPILING)
 367       execute_process(COMMAND ./sem_open
 368       WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
 369       RESULT_VARIABLE HAVE_SEM_OPEN_run
 370       OUTPUT_VARIABLE var_compil
 371       )
 372       if (NOT HAVE_SEM_OPEN_run)
 373         set(HAVE_SEM_OPEN 1)
 374         message(STATUS "sem_open is executable")
 375       else()
 376         set(HAVE_SEM_OPEN 0)
 377         if(EXISTS "${CMAKE_BINARY_DIR}/sem_open")
 378           message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_open exists!")
 379         else()
 380           message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_open not exists!")
 381         endif()
 382         message(STATUS "Warning: sem_open not executable")
 383         message(STATUS "Compilation output: '${var_compil}'")
 384         message(STATUS "Exit result of sem_open: ${HAVE_SEM_OPEN_run}")
 385       endif()
 386     endif()
 387     file(REMOVE sem_open)
 388
 389   else()
 390     set(HAVE_SEM_OPEN 0)
 391   endif()
 392
 393   if(HAVE_SEM_INIT_LIB)
 394     execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_init.c -lpthread -o sem_init
 395     WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
 396     RESULT_VARIABLE HAVE_SEM_INIT_run OUTPUT_VARIABLE HAVE_SEM_INIT_compil)
 397
 398     # Test sem_init by compiling:
 399     if(HAVE_SEM_INIT_compil)
 400       set(HAVE_SEM_INIT 0)
 401       message(STATUS "Warning: sem_init not compilable")
 402       message(STATUS "HAVE_SEM_INIT_comp_output: ${HAVE_SEM_OPEN_comp_output}")
 403     else()
 404       set(HAVE_SEM_INIT 1)
 405       message(STATUS "sem_init is compilable")
 406     endif()
 407
 408     # If we're not crosscompiling, we check by executing the program:
 409     if (HAVE_SEM_INIT AND NOT CMAKE_CROSSCOMPILING)
 410       execute_process(COMMAND ./sem_init
 411       WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
 412       RESULT_VARIABLE HAVE_SEM_INIT_run
 413       OUTPUT_VARIABLE var_compil
 414       )
 415       if (NOT HAVE_SEM_INIT_run)
 416         set(HAVE_SEM_INIT 1)
 417         message(STATUS "sem_init is executable")
 418       else()
 419         set(HAVE_SEM_INIT 0)
 420         if(EXISTS "${CMAKE_BINARY_DIR}/sem_init")
 421           message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_init exists!")
 422         else()
 423           message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_init not exists!")
 424         endif()
 425         message(STATUS "Warning: sem_init not executable")
 426         message(STATUS "Compilation output: '${var_compil}'")
 427         message(STATUS "Exit result of sem_init: ${HAVE_SEM_INIT_run}")
 428       endif()
 429     endif()
 430     file(REMOVE sem_init)
 431   endif()
 432
 433   if(NOT HAVE_SEM_OPEN AND NOT HAVE_SEM_INIT)
 434     message(FATAL_ERROR "Semaphores are not usable (neither sem_open nor sem_init is both compilable and executable), but they are mandatory to threads (you may need to mount /dev).")
 435   endif()
 436
 437   ### Test that we have a way to timewait for semaphores
 438
 439   if(HAVE_SEM_TIMEDWAIT_LIB)
 440
 441     execute_process(
 442       COMMAND "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_timedwait.c -lpthread"
 443       WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
 444       OUTPUT_VARIABLE HAVE_SEM_TIMEDWAIT_run
 445       )
 446
 447     if(HAVE_SEM_TIMEDWAIT_run)
 448       set(HAVE_SEM_TIMEDWAIT 0)
 449       message(STATUS "timedwait not compilable")
 450     else()
 451       set(HAVE_SEM_TIMEDWAIT 1)
 452       message(STATUS "timedwait is compilable")
 453     endif()
 454   endif()
 455
 456   ### HAVE_MUTEX_TIMEDLOCK
 457
 458   if(HAVE_MUTEX_TIMEDLOCK_LIB)
 459
 460     execute_process(
 461       COMMAND "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_mutex_timedlock.c -lpthread"
 462       WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
 463       OUTPUT_VARIABLE HAVE_MUTEX_TIMEDLOCK_run
 464       )
 465
 466     if(HAVE_MUTEX_TIMEDLOCK_run)
 467       set(HAVE_MUTEX_TIMEDLOCK 0)
 468       message(STATUS "timedlock not compilable")
 469     else()
 470       message(STATUS "timedlock is compilable")
 471       set(HAVE_MUTEX_TIMEDLOCK 1)
 472     endif()
 473   endif()
 474 endif()
 475
 476 # This is needed for ucontext on MacOS X:
 477 if(CMAKE_SYSTEM_NAME MATCHES "Darwin")
 478   add_definitions(-D_XOPEN_SOURCE=700 -D_DARWIN_C_SOURCE)
 479 endif()
 480
 481 if(WIN32)
 482   # We always provide our own implementation of ucontext on Windows.
 483   try_compile(HAVE_UCONTEXT
 484     ${CMAKE_BINARY_DIR}
 485     ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_AC_CHECK_MCSC.c
 486     COMPILE_DEFINITIONS _XBT_WIN32
 487     INCLUDE_DIRECTORIES
 488       ${CMAKE_HOME_DIRECTORY}/src/include
 489       ${CMAKE_HOME_DIRECTORY}/src/xbt
 490   )
 491 else()
 492   # We always provide our own implementation of ucontext on Windows.
 493   try_compile(HAVE_UCONTEXT
 494     ${CMAKE_BINARY_DIR}
 495     ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_AC_CHECK_MCSC.c)
 496 endif()
 497
 498 #If can have both context
 499
 500 if(HAVE_UCONTEXT)
 501   set(CONTEXT_UCONTEXT 1)
 502   message("-- Support for ucontext factory")
 503 endif()
 504
 505 if(HAVE_PTHREAD)
 506   set(CONTEXT_THREADS 1)
 507   message("-- Support for thread context factory")
 508 endif()
 509
 510 ###############
 511 ## GIT version check
 512 ##
 513 if(EXISTS ${CMAKE_HOME_DIRECTORY}/.git/)
 514   execute_process(COMMAND git remote
 515   COMMAND head -n 1
 516   WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
 517   OUTPUT_VARIABLE remote
 518   RESULT_VARIABLE ret
 519   )
 520   string(REPLACE "\n" "" remote "${remote}")
 521   #message(STATUS "Git remote: ${remote}")
 522   execute_process(COMMAND git config --get remote.${remote}.url
 523   WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
 524   OUTPUT_VARIABLE url
 525   RESULT_VARIABLE ret
 526   )
 527   string(REPLACE "\n" "" url "${url}")
 528   #message(STATUS "Git url: ${url}")
 529   if(url)
 530     execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log --pretty=oneline --abbrev-commit -1
 531     WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
 532     OUTPUT_VARIABLE GIT_VERSION
 533     RESULT_VARIABLE ret
 534     )
 535     string(REPLACE "\n" "" GIT_VERSION "${GIT_VERSION}")
 536     message(STATUS "Git version: ${GIT_VERSION}")
 537     execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log -n 1 --pretty=format:%ai .
 538     WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
 539     OUTPUT_VARIABLE GIT_DATE
 540     RESULT_VARIABLE ret
 541     )
 542     string(REPLACE "\n" "" GIT_DATE "${GIT_DATE}")
 543     message(STATUS "Git date: ${GIT_DATE}")
 544     string(REGEX REPLACE " .*" "" GIT_VERSION "${GIT_VERSION}")
 545
 546     execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log --pretty=format:%H -1
 547                     WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
 548                     OUTPUT_VARIABLE SIMGRID_GITHASH
 549                     RESULT_VARIABLE ret
 550                     )
 551     string(REPLACE "\n" "" SIMGRID_GITHASH "${SIMGRID_GITHASH}")
 552
 553   endif()
 554 elseif(EXISTS ${CMAKE_HOME_DIRECTORY}/.gitversion)
 555   FILE(STRINGS ${CMAKE_HOME_DIRECTORY}/.gitversion GIT_VERSION)
 556 endif()
 557
 558 if(release)
 559   set(SIMGRID_VERSION_BANNER "${SIMGRID_VERSION_BANNER}\\nRelease build")
 560 else()
 561   set(SIMGRID_VERSION_BANNER "${SIMGRID_VERSION_BANNER}\\nDevelopment build")
 562 endif()
 563 if(GIT_VERSION)
 564   set(SIMGRID_VERSION_BANNER "${SIMGRID_VERSION_BANNER} at commit ${GIT_VERSION}")
 565 endif()
 566 if(GIT_DATE)
 567   set(SIMGRID_VERSION_BANNER "${SIMGRID_VERSION_BANNER} (${GIT_DATE})")
 568 endif()
 569 #--------------------------------------------------------------------------------------------------
 570
 571 set(makecontext_CPPFLAGS_2 "")
 572 if(HAVE_MAKECONTEXT OR WIN32)
 573   set(makecontext_CPPFLAGS "-DTEST_makecontext")
 574   if(CMAKE_SYSTEM_NAME MATCHES "Darwin")
 575     set(makecontext_CPPFLAGS_2 "-D_XOPEN_SOURCE=700")
 576   endif()
 577
 578   if(WIN32)
 579     if(ARCH_32_BITS)
 580       set(makecontext_CPPFLAGS "-DTEST_makecontext -D_I_X86_")
 581     else()
 582       set(makecontext_CPPFLAGS "-DTEST_makecontext -D_AMD64_")
 583     endif()
 584     set(makecontext_CPPFLAGS_2 "-D_XBT_WIN32 -I${CMAKE_HOME_DIRECTORY}/src/include -I${CMAKE_HOME_DIRECTORY}/src/xbt")
 585   endif()
 586
 587   file(REMOVE ${CMAKE_BINARY_DIR}/conftestval)
 588
 589   if(CMAKE_CROSSCOMPILING)
 590     set(RUN_makecontext_VAR "cross")
 591     set(COMPILE_makecontext_VAR "cross")
 592   else()
 593     try_run(RUN_makecontext_VAR COMPILE_makecontext_VAR
 594       ${CMAKE_BINARY_DIR}
 595       ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_stacksetup.c
 596       COMPILE_DEFINITIONS "${makecontext_CPPFLAGS} ${makecontext_CPPFLAGS_2}"
 597       )
 598   endif()
 599
 600   if(EXISTS ${CMAKE_BINARY_DIR}/conftestval)
 601     file(READ ${CMAKE_BINARY_DIR}/conftestval MAKECONTEXT_ADDR_SIZE)
 602     string(REPLACE "\n" "" MAKECONTEXT_ADDR_SIZE "${MAKECONTEXT_ADDR_SIZE}")
 603     string(REGEX MATCH ;^.*,;MAKECONTEXT_ADDR "${MAKECONTEXT_ADDR_SIZE}")
 604     string(REGEX MATCH ;,.*$; MAKECONTEXT_SIZE "${MAKECONTEXT_ADDR_SIZE}")
 605     string(REPLACE "," "" makecontext_addr "${MAKECONTEXT_ADDR}")
 606     string(REPLACE "," "" makecontext_size "${MAKECONTEXT_SIZE}")
 607     set(pth_skaddr_makecontext "#define pth_skaddr_makecontext(skaddr,sksize) (${makecontext_addr})")
 608     set(pth_sksize_makecontext "#define pth_sksize_makecontext(skaddr,sksize) (${makecontext_size})")
 609     message(STATUS "${pth_skaddr_makecontext}")
 610     message(STATUS "${pth_sksize_makecontext}")
 611   else()
 612     # message(FATAL_ERROR "makecontext is not compilable")
 613   endif()
 614 endif()
 615
 616 #--------------------------------------------------------------------------------------------------
 617
 618 ### check for stackgrowth
 619 if (NOT CMAKE_CROSSCOMPILING)
 620   try_run(RUN_makecontext_VAR COMPILE_makecontext_VAR
 621     ${CMAKE_BINARY_DIR}
 622     ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_stackgrowth.c
 623     RUN_OUTPUT_VARIABLE stack
 624     )
 625 endif()
 626 if("${stack}" STREQUAL "down")
 627   set(PTH_STACKGROWTH "-1")
 628 elseif("${stack}" STREQUAL "up")
 629   set(PTH_STACKGROWTH "1")
 630 else()
 631   if("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "x86_64")
 632     set(PTH_STACKGROWTH "-1")
 633   elseif("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "i686")
 634     set(PTH_STACKGROWTH "-1")
 635   else()
 636     message(ERROR "Could not figure the stack direction.")
 637   endif()
 638 endif()
 639
 640 ###############
 641 ## System checks
 642 ##
 643
 644 #SG_CONFIGURE_PART([System checks...])
 645 #AC_PROG_CC(xlC gcc cc) -auto
 646 #AM_SANITY_CHECK -auto
 647
 648 #AC_PROG_MAKE_SET
 649
 650 #AC_CHECK_VA_COPY
 651
 652 set(diff_va "va_copy((d),(s))"
 653   "VA_COPY((d),(s))"
 654   "__va_copy((d),(s))"
 655   "__builtin_va_copy((d),(s))"
 656   "do { (d) = (s)\; } while (0)"
 657   "do { *(d) = *(s)\; } while (0)"
 658   "memcpy((void *)&(d), (void *)&(s), sizeof(s))"
 659   "memcpy((void *)(d), (void *)(s), sizeof(*(s)))"
 660   )
 661
 662 foreach(fct ${diff_va})
 663   write_file("${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_va_copy.c" "#include <stdlib.h>
 664 #include <stdarg.h>
 665 #include <string.h>
 666 #define DO_VA_COPY(d,s) ${fct}
 667 void test(char *str, ...)
 668 {
 669   va_list ap, ap2;
 670   int i;
 671   va_start(ap, str);
 672   DO_VA_COPY(ap2, ap);
 673   for (i = 1; i <= 9; i++) {
 674     int k = (int)va_arg(ap, int);
 675     if (k != i)
 676       abort();
 677   }
 678   DO_VA_COPY(ap, ap2);
 679   for (i = 1; i <= 9; i++) {
 680     int k = (int)va_arg(ap, int);
 681     if (k != i)
 682       abort();
 683   }
 684   va_end(ap);
 685 }
 686 int main(void)
 687 {
 688   test(\"test\", 1, 2, 3, 4, 5, 6, 7, 8, 9);
 689   exit(0);
 690 }"
 691     )
 692
 693   execute_process(
 694   COMMAND ${CMAKE_C_COMPILER} "${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_va_copy.c"
 695   WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
 696   RESULT_VARIABLE COMPILE_VA_NULL_VAR
 697   OUTPUT_QUIET
 698   ERROR_QUIET
 699   )
 700
 701   if(NOT COMPILE_VA_NULL_VAR)
 702     string(REGEX REPLACE "\;" "" fctbis ${fct})
 703     if(${fctbis} STREQUAL "va_copy((d),(s))")
 704       set(HAVE_VA_COPY 1)
 705       set(ac_cv_va_copy "C99")
 706       set(__VA_COPY_USE_C99 "va_copy((d),(s))")
 707     endif()
 708
 709     if(${fctbis} STREQUAL "VA_COPY((d),(s))")
 710       set(ac_cv_va_copy "GCM")
 711       set(__VA_COPY_USE_GCM "VA_COPY((d),(s))")
 712     endif()
 713
 714     if(${fctbis} STREQUAL "__va_copy((d),(s))")
 715       set(ac_cv_va_copy "GCH")
 716       set(__VA_COPY_USE_GCH "__va_copy((d),(s))")
 717     endif()
 718
 719     if(${fctbis} STREQUAL "__builtin_va_copy((d),(s))")
 720       set(ac_cv_va_copy "GCB")
 721       set(__VA_COPY_USE_GCB "__builtin_va_copy((d),(s))")
 722     endif()
 723
 724     if(${fctbis} STREQUAL "do { (d) = (s) } while (0)")
 725       set(ac_cv_va_copy "ASS")
 726       set(__VA_COPY_USE_ASS "do { (d) = (s); } while (0)")
 727     endif()
 728
 729     if(${fctbis} STREQUAL "do { *(d) = *(s) } while (0)")
 730       set(ac_cv_va_copy "ASP")
 731       set(__VA_COPY_USE_ASP "do { *(d) = *(s); } while (0)")
 732     endif()
 733
 734     if(${fctbis} STREQUAL "memcpy((void *)&(d), (void *)&(s), sizeof(s))")
 735       set(ac_cv_va_copy "CPS")
 736       set(__VA_COPY_USE_CPS "memcpy((void *)&(d), (void *)&(s), sizeof(s))")
 737     endif()
 738
 739     if(${fctbis} STREQUAL "memcpy((void *)(d), (void *)(s), sizeof(*(s)))")
 740       set(ac_cv_va_copy "CPP")
 741       set(__VA_COPY_USE_CPP "memcpy((void *)(d), (void *)(s), sizeof(*(s)))")
 742     endif()
 743
 744     if(NOT STATUS_OK)
 745       set(__VA_COPY_USE "__VA_COPY_USE_${ac_cv_va_copy}(d, s)")
 746     endif()
 747     set(STATUS_OK "1")
 748
 749   endif()
 750
 751 endforeach(fct ${diff_va})
 752
 753 #--------------------------------------------------------------------------------------------------
 754 ### check for a working snprintf
 755 if(HAVE_SNPRINTF AND HAVE_VSNPRINTF OR WIN32)
 756   if(WIN32)
 757     #set(HAVE_SNPRINTF 1)
 758     #set(HAVE_VSNPRINTF 1)
 759   endif()
 760
 761   if(CMAKE_CROSSCOMPILING)
 762     set(RUN_SNPRINTF_FUNC "cross")
 763     #set(PREFER_PORTABLE_SNPRINTF 1)
 764   else()
 765     try_run(RUN_SNPRINTF_FUNC_VAR COMPILE_SNPRINTF_FUNC_VAR
 766       ${CMAKE_BINARY_DIR}
 767       ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_snprintf.c
 768       )
 769   endif()
 770
 771   if(CMAKE_CROSSCOMPILING)
 772     set(RUN_VSNPRINTF_FUNC "cross")
 773     set(PREFER_PORTABLE_VSNPRINTF 1)
 774   else()
 775     try_run(RUN_VSNPRINTF_FUNC_VAR COMPILE_VSNPRINTF_FUNC_VAR
 776       ${CMAKE_BINARY_DIR}
 777       ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_vsnprintf.c
 778       )
 779   endif()
 780
 781   set(PREFER_PORTABLE_SNPRINTF 0)
 782   if(RUN_VSNPRINTF_FUNC_VAR MATCHES "FAILED_TO_RUN")
 783     set(PREFER_PORTABLE_SNPRINTF 1)
 784   endif()
 785   if(RUN_SNPRINTF_FUNC_VAR MATCHES "FAILED_TO_RUN")
 786     set(PREFER_PORTABLE_SNPRINTF 1)
 787   endif()
 788 endif()
 789
 790 ### check for asprintf function familly
 791 if(HAVE_ASPRINTF)
 792   SET(simgrid_need_asprintf "")
 793   SET(NEED_ASPRINTF 0)
 794 else()
 795   SET(simgrid_need_asprintf "#define SIMGRID_NEED_ASPRINTF 1")
 796   SET(NEED_ASPRINTF 1)
 797 endif()
 798
 799 if(HAVE_VASPRINTF)
 800   SET(simgrid_need_vasprintf "")
 801   SET(NEED_VASPRINTF 0)
 802 else()
 803   SET(simgrid_need_vasprintf "#define SIMGRID_NEED_VASPRINTF 1")
 804   SET(NEED_VASPRINTF 1)
 805 endif()
 806
 807 ### check for addr2line
 808
 809 find_path(ADDR2LINE NAMES addr2line     PATHS NO_DEFAULT_PATHS  )
 810 if(ADDR2LINE)
 811   set(ADDR2LINE "${ADDR2LINE}/addr2line")
 812 endif()
 813
 814 ### File to create
 815
 816 configure_file("${CMAKE_HOME_DIRECTORY}/src/context_sysv_config.h.in"
 817   "${CMAKE_BINARY_DIR}/src/context_sysv_config.h" @ONLY IMMEDIATE)
 818
 819 SET( CMAKEDEFINE "#cmakedefine" )
 820 configure_file("${CMAKE_HOME_DIRECTORY}/tools/cmake/src/internal_config.h.in" "${CMAKE_BINARY_DIR}/src/internal_config.h" @ONLY IMMEDIATE)
 821 configure_file("${CMAKE_BINARY_DIR}/src/internal_config.h" "${CMAKE_BINARY_DIR}/src/internal_config.h" @ONLY IMMEDIATE)
 822 configure_file("${CMAKE_HOME_DIRECTORY}/include/simgrid_config.h.in" "${CMAKE_BINARY_DIR}/include/simgrid_config.h" @ONLY IMMEDIATE)
 823
 824 set(top_srcdir "${CMAKE_HOME_DIRECTORY}")
 825 set(srcdir "${CMAKE_HOME_DIRECTORY}/src")
 826 set(bindir "${CMAKE_BINARY_DIR}")
 827
 828 ### Script used when simgrid is installed
 829 set(exec_prefix ${CMAKE_INSTALL_PREFIX})
 830 set(includeflag "-I${CMAKE_INSTALL_PREFIX}/include -I${CMAKE_INSTALL_PREFIX}/include/smpi")
 831 set(includedir "${CMAKE_INSTALL_PREFIX}/include")
 832 set(libdir ${exec_prefix}/lib)
 833 set(CMAKE_SMPI_COMMAND "export LD_LIBRARY_PATH=\"${CMAKE_INSTALL_PREFIX}/lib")
 834 if(NS3_LIBRARY_PATH)
 835   set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
 836 endif()
 837 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
 838
 839 file(READ ${CMAKE_HOME_DIRECTORY}/src/smpi/smpitools.sh SMPITOOLS_SH)
 840 configure_file(${CMAKE_HOME_DIRECTORY}/include/smpi/mpif.h.in ${CMAKE_BINARY_DIR}/include/smpi/mpif.h @ONLY)
 841 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpicc.in ${CMAKE_BINARY_DIR}/bin/smpicc @ONLY)
 842 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpicxx.in ${CMAKE_BINARY_DIR}/bin/smpicxx @ONLY)
 843 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpiff.in ${CMAKE_BINARY_DIR}/bin/smpiff @ONLY)
 844 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpif90.in ${CMAKE_BINARY_DIR}/bin/smpif90 @ONLY)
 845 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpirun.in ${CMAKE_BINARY_DIR}/bin/smpirun @ONLY)
 846
 847 ### Script used when simgrid is compiling
 848 set(includeflag "-I${CMAKE_HOME_DIRECTORY}/include -I${CMAKE_HOME_DIRECTORY}/include/smpi")
 849 set(includeflag "${includeflag} -I${CMAKE_BINARY_DIR}/include -I${CMAKE_BINARY_DIR}/include/smpi")
 850 set(includedir "${CMAKE_HOME_DIRECTORY}/include")
 851 set(exec_prefix "${CMAKE_BINARY_DIR}/smpi_script/")
 852 set(CMAKE_SMPI_COMMAND "export LD_LIBRARY_PATH=\"${CMAKE_BINARY_DIR}/lib")
 853 if(NS3_LIBRARY_PATH)
 854   set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
 855 endif()
 856 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
 857 set(libdir "${CMAKE_BINARY_DIR}/lib")
 858
 859 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpicc.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpicc @ONLY)
 860 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpicxx.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpicxx @ONLY)
 861 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpiff.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpiff @ONLY)
 862 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpif90.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpif90 @ONLY)
 863 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpirun.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpirun @ONLY)
 864
 865 set(top_builddir ${CMAKE_HOME_DIRECTORY})
 866
 867 if(NOT WIN32)
 868   execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpicc)
 869   execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpicxx)
 870   execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpiff)
 871   execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpif90)
 872   execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpirun)
 873   execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/smpi_script/bin/smpicc)
 874   execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/smpi_script/bin/smpicxx)
 875   execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/smpi_script/bin/smpiff)
 876   execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/smpi_script/bin/smpif90)
 877   execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/smpi_script/bin/smpirun)
 878 endif()
 879
 880 set(generated_headers_to_install
 881   ${CMAKE_CURRENT_BINARY_DIR}/include/smpi/mpif.h
 882   ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid_config.h
 883   )
 884
 885 set(generated_headers
 886   ${CMAKE_CURRENT_BINARY_DIR}/src/context_sysv_config.h
 887   ${CMAKE_CURRENT_BINARY_DIR}/src/internal_config.h
 888   )
 889
 890 set(generated_files_to_clean
 891   ${generated_headers}
 892   ${generated_headers_to_install}
 893   ${CMAKE_BINARY_DIR}/bin/smpicc
 894   ${CMAKE_BINARY_DIR}/bin/smpicxx
 895   ${CMAKE_BINARY_DIR}/bin/smpiff
 896   ${CMAKE_BINARY_DIR}/bin/smpif90
 897   ${CMAKE_BINARY_DIR}/bin/smpirun
 898   ${CMAKE_BINARY_DIR}/bin/colorize
 899   ${CMAKE_BINARY_DIR}/bin/simgrid_update_xml
 900   ${CMAKE_BINARY_DIR}/examples/smpi/tracing/smpi_traced.trace
 901   )
 902
 903 if(NOT "${CMAKE_BINARY_DIR}" STREQUAL "${CMAKE_HOME_DIRECTORY}")
 904   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt COPYONLY)
 905   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt COPYONLY)
 906   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allReduce.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt COPYONLY)
 907   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_barrier.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt COPYONLY)
 908   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_bcast.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt COPYONLY)
 909   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_with_isend.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt COPYONLY)
 910   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_alltoall.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoall.txt COPYONLY)
 911   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_alltoallv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoallv.txt COPYONLY)
 912   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_waitall.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_waitall.txt COPYONLY)
 913   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_reducescatter.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_reducescatter.txt COPYONLY)
 914   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_gather.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_gather.txt COPYONLY)
 915   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allgatherv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allgatherv.txt COPYONLY)
 916   configure_file(${CMAKE_HOME_DIRECTORY}/teshsuite/smpi/hostfile ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile COPYONLY)
 917
 918   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/description_file ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/description_file COPYONLY)
 919   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/README ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/README COPYONLY)
 920   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/smpi_replay.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/smpi_replay.txt COPYONLY)
 921   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt COPYONLY)
 922   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt COPYONLY)
 923   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt COPYONLY)
 924   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt COPYONLY)
 925   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt COPYONLY)
 926   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt COPYONLY)
 927   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt COPYONLY)
 928   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt COPYONLY)
 929   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt COPYONLY)
 930   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt COPYONLY)
 931   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt COPYONLY)
 932   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt COPYONLY)
 933   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt COPYONLY)
 934   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt COPYONLY)
 935   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt COPYONLY)
 936   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt COPYONLY)
 937   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt COPYONLY)
 938   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt COPYONLY)
 939   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt COPYONLY)
 940   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt COPYONLY)
 941   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt COPYONLY)
 942   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt COPYONLY)
 943   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt COPYONLY)
 944   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt COPYONLY)
 945   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt COPYONLY)
 946   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt COPYONLY)
 947   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt COPYONLY)
 948   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt COPYONLY)
 949   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt COPYONLY)
 950   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt COPYONLY)
 951   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt COPYONLY)
 952   configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt COPYONLY)
 953
 954   set(generated_files_to_clean
 955     ${generated_files_to_clean}
 956     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt
 957     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt
 958     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt
 959     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt
 960     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt
 961     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt
 962     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoall.txt
 963     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoallv.txt
 964     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_waitall.txt
 965     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_gather.txt
 966     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allgatherv.txt
 967     ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_reducescatter.txt
 968     ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile
 969     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/description_file
 970     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/README
 971     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/smpi_replay.txt
 972     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt
 973     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt
 974     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt
 975     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt
 976     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt
 977     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt
 978     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt
 979     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt
 980     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt
 981     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt
 982     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt
 983     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt
 984     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt
 985     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt
 986     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt
 987     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt
 988     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt
 989     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt
 990     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt
 991     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt
 992     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt
 993     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt
 994     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt
 995     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt
 996     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt
 997     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt
 998     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt
 999     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt
1000     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt
1001     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt
1002     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt
1003     ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt
1004     )
1005 endif()
1006
1007 SET_DIRECTORY_PROPERTIES(PROPERTIES ADDITIONAL_MAKE_CLEAN_FILES
1008   "${generated_files_to_clean}")
1009
1010 IF(${ARCH_32_BITS})
1011   set(WIN_ARCH "32")
1012 ELSE()
1013   set(WIN_ARCH "64")
1014 ENDIF()
1015 configure_file("${CMAKE_HOME_DIRECTORY}/tools/cmake/src/simgrid.nsi.in" "${CMAKE_BINARY_DIR}/simgrid.nsi" @ONLY IMMEDIATE)