1 cmake_minimum_required(VERSION 2.8.8)
2 message(STATUS "Cmake version ${CMAKE_MAJOR_VERSION}.${CMAKE_MINOR_VERSION}.${CMAKE_PATCH_VERSION}")
3 set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${CMAKE_HOME_DIRECTORY}/tools/cmake/Modules)
7 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
8 # Check for the compiler #
9 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
11 ### Need to set rc ccompiler before enable language
13 SET(CMAKE_RC_COMPILER "windres")
17 ## Check the C/C++ standard that we need
18 ## See also tools/cmake/GCCFlags.cmake that sets our paranoid warning flags
19 INCLUDE(CheckCCompilerFlag)
20 CHECK_C_COMPILER_FLAG(-fstack-cleaner HAVE_C_STACK_CLEANER)
22 ## Request full debugging flags
23 set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -g3")
24 set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -g3")
25 set(CMAKE_Fortran_FLAGS "${CMAKE_Fortran_FLAGS} -g")
27 if (CMAKE_COMPILER_IS_GNUCC)
28 if (CMAKE_CXX_COMPILER_VERSION VERSION_LESS "4.7")
30 "SimGrid needs at least g++ version 4.7 to compile but you have ${CMAKE_CXX_COMPILER_VERSION}."
31 "You need a sufficient support of c++11 to compile SimGrid.")
35 ## We need a decent support of the c++11 standard
36 include(CheckCXXCompilerFlag)
37 CHECK_CXX_COMPILER_FLAG("-std=gnu++11" COMPILER_SUPPORTS_CXX11)
38 if(COMPILER_SUPPORTS_CXX11)
39 set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=gnu++11")
42 "The compiler ${CMAKE_CXX_COMPILER} (v${CMAKE_CXX_COMPILER_VERSION}) has no C++11 support. "
43 "Please use a decent C++ compiler.")
46 ### And we need C11 standard, too
47 include(CheckCCompilerFlag)
48 CHECK_C_COMPILER_FLAG("-std=gnu11" COMPILER_SUPPORTS_C11)
49 if(COMPILER_SUPPORTS_C11)
50 set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -std=gnu11")
53 "The compiler ${CMAKE_C_COMPILER} (v${CMAKE_C_COMPILER_VERSION}) has no C11 support. "
54 "Please use a decent C compiler "
55 "(note that c++11 support of ${CMAKE_CXX_COMPILER} seems ok).")
57 if(APPLE AND (CMAKE_C_COMPILER_VERSION VERSION_LESS "4.6"))
58 ### gcc 4.[1-5] cannot compile ucontext on OSX
59 message(STATUS "Ucontext can't be used with this version of gcc (must be greater than 4.5)")
60 set(HAVE_UCONTEXT_H 0)
65 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Option.cmake)
68 if ((NOT DEFINED enable_smpi) OR enable_smpi)
69 # First unset the compiler in case we're re-running cmake over a previous
70 # configuration where it was saved as smpiff
71 unset(CMAKE_Fortran_COMPILER)
75 enable_language(Fortran OPTIONAL)
78 if(CMAKE_Fortran_COMPILER)
79 # Fortran compiler detected: save it, then replace by smpiff
80 set(SAVED_Fortran_COMPILER "${CMAKE_Fortran_COMPILER}" CACHE FILEPATH "The real Fortran compiler")
81 set(CMAKE_Fortran_COMPILER smpiff)
83 endif(CMAKE_Fortran_COMPILER)
87 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
88 # Build the version number #
89 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
91 set(SIMGRID_VERSION_MAJOR "3")
92 set(SIMGRID_VERSION_MINOR "13")
93 set(SIMGRID_VERSION_PATCH "90")
94 set(SIMGRID_VERSION_EXTRA "-prealpha") # Extra words to add to version string (e.g. -rc1)
96 set(SIMGRID_VERSION_DATE "2016") # Year for copyright information
98 if(${SIMGRID_VERSION_PATCH} EQUAL "0")
99 set(release_version "${SIMGRID_VERSION_MAJOR}.${SIMGRID_VERSION_MINOR}")
101 set(release_version "${SIMGRID_VERSION_MAJOR}.${SIMGRID_VERSION_MINOR}.${SIMGRID_VERSION_PATCH}")
104 set(SIMGRID_VERSION_STRING "SimGrid version ${release_version}${SIMGRID_VERSION_EXTRA}")
106 set(libsimgrid_version "${release_version}")
107 set(libsimgrid-java_version "${release_version}")
109 ### SET THE LIBRARY EXTENSION
119 execute_process(COMMAND ${CMAKE_LINKER} -version OUTPUT_VARIABLE LINKER_VERSION)
120 string(REGEX MATCH "[0-9].[0-9]*" LINKER_VERSION "${LINKER_VERSION}")
122 ### Set the library providing dlopen
123 if("${CMAKE_SYSTEM}" MATCHES "Linux")
124 find_library(dl DL_LIBRARY)
125 endif("${CMAKE_SYSTEM}" MATCHES "Linux")
127 ### Find programs and paths
128 FIND_PROGRAM(GCOV_PATH gcov)
131 message(FATAL_ERROR "Please install Perl to compile SimGrid.")
134 # tesh.py needs python 3 (or the module python-subprocess32 on python2.8+)
135 set(PythonInterp_FIND_VERSION 3)
136 set(PythonInterp_FIND_VERSION_COUNT 1)
137 set(PythonInterp_FIND_VERSION_MAJOR 3)
138 include(FindPythonInterp)
139 if(NOT PYTHONINTERP_FOUND)
140 message(FATAL_ERROR "Please install Python (version 3 or higher).")
144 set(CMAKE_INSTALL_RPATH "${CMAKE_INSTALL_PREFIX}/lib")
145 set(CMAKE_INSTALL_RPATH_USE_LINK_PATH TRUE)
147 SET(LIBRARY_OUTPUT_PATH ${CMAKE_BINARY_DIR}/lib)
149 ### Compute the include paths
151 ${CMAKE_HOME_DIRECTORY}
152 ${CMAKE_HOME_DIRECTORY}/include
153 ${CMAKE_HOME_DIRECTORY}/src/include
155 ${CMAKE_BINARY_DIR}/include
158 if(NOT CMAKE_CROSSCOMPILING AND EXISTS /usr/include/)
159 set(INCLUDES ${INCLUDES} /usr/include/)
163 set(CMAKE_INCLUDE_WIN "${CMAKE_C_COMPILER}")
164 set(CMAKE_LIB_WIN "${CMAKE_C_COMPILER}")
165 string(REGEX REPLACE "/bin/gcc.*" "/include" CMAKE_INCLUDE_WIN "${CMAKE_INCLUDE_WIN}")
166 string(REGEX REPLACE "/bin/gcc.*" "/lib" CMAKE_LIB_WIN "${CMAKE_LIB_WIN}")
167 set(INCLUDES ${INCLUDES} ${CMAKE_INCLUDE_WIN})
168 unset(CMAKE_INCLUDE_WIN)
171 include_directories(${INCLUDES})
173 # library dependency cannot start with a space (CMP0004), so initialize it with something that is never desactivated.
174 set(SIMGRID_DEP "-lm")
176 ### Determine the assembly flavor that we need today
177 set(HAVE_RAW_CONTEXTS 0)
178 include(CMakeDetermineSystem)
179 IF(CMAKE_SYSTEM_PROCESSOR MATCHES ".86|AMD64|amd64")
181 message(STATUS "System processor: i686 (${CMAKE_SYSTEM_PROCESSOR}, 32 bits)")
182 set(PROCESSOR_i686 1)
183 set(PROCESSOR_x86_64 0)
185 message(STATUS "System processor: x86_64 (${CMAKE_SYSTEM_PROCESSOR}, 64 bits)")
186 set(PROCESSOR_i686 0)
187 set(PROCESSOR_x86_64 1)
190 message(STATUS "Disable fast raw contexts on Windows.")
192 set(HAVE_RAW_CONTEXTS 1)
195 set(PROCESSOR_i686 0)
196 set(PROCESSOR_x86_64 0)
199 include(CheckFunctionExists)
200 include(CheckTypeSize)
201 include(CheckIncludeFile)
202 include(CheckIncludeFiles)
203 include(CheckLibraryExists)
204 include(CheckSymbolExists)
207 include(FindGraphviz)
211 include(FindLuaSimgrid)
218 message(FATAL_ERROR "Cannot find NS3. Please install it (apt-get install ns3 libns3-dev) or disable that cmake option")
223 set(Boost_USE_STATIC_LIBS 1)
229 message(FATAL_ERROR "Cannot find PAPI. Please install it (apt-get install papi-tools libpapi-dev) or disable PAPI bindings.")
233 find_package(Boost 1.48)
235 include_directories(${Boost_INCLUDE_DIRS})
238 message(FATAL_ERROR "Failed to find Boost libraries (Try to install them with 'sudo fink install boost1.53.nopython')")
240 message(FATAL_ERROR "Failed to find Boost libraries."
241 "Did you install libboost-dev and libboost-context-dev?"
242 "(libboost-context-dev is optional)"
243 "SimGrid requires Boost >= 1.48.0")
247 #Boost context 1.61 will break compatibility with our implementation.
248 #Warn users about that
249 find_package(Boost 1.61 COMPONENTS context)
251 if(Boost_FOUND AND Boost_CONTEXT_FOUND)
252 message("WARNING : our implementation of Boost context factory is not compatible with Boost >=1.61 yet.")
255 set(HAVE_BOOST_CONTEXTS 0)
257 # Try again to see if we have libboost-context
258 find_package(Boost 1.42 COMPONENTS context)
259 set(Boost_FOUND 1) # We don't care of whether this component is missing
261 if(Boost_FOUND AND Boost_CONTEXT_FOUND)
262 # We should use feature detection for this instead:
263 if (Boost_VERSION LESS 105600)
264 message("Found Boost.Context API v1")
265 set(HAVE_BOOST_CONTEXTS 1)
267 message("Found Boost.Context API v2")
268 set(HAVE_BOOST_CONTEXTS 2)
271 message (" boost : found.")
272 message (" boost-context: missing. Install libboost-context-dev for this optional feature.")
273 set(HAVE_BOOST_CONTEXTS 0)
277 # Checks for header libraries functions.
278 CHECK_LIBRARY_EXISTS(rt clock_gettime "" HAVE_POSIX_GETTIME)
280 CHECK_LIBRARY_EXISTS(pthread pthread_create "" HAVE_PTHREAD)
281 if(NOT APPLE) # OS X El Capitan deprecates this function
282 CHECK_LIBRARY_EXISTS(pthread sem_init "" HAVE_SEM_INIT_LIB)
284 CHECK_LIBRARY_EXISTS(pthread sem_open "" HAVE_SEM_OPEN_LIB)
285 set(HAVE_PTHREAD_SETAFFINITY 0)
286 CHECK_LIBRARY_EXISTS(pthread pthread_setaffinity_np "" HAVE_PTHREAD_SETAFFINITY)
288 if(CMAKE_SYSTEM_NAME MATCHES "Darwin")
289 set(CMAKE_REQUIRED_DEFINITIONS "-D_XOPEN_SOURCE=700 -D_DARWIN_C_SOURCE")
291 # Use the GNU version of unusual modifiers like PRIx64
292 add_definitions(-D__USE_MINGW_ANSI_STDIO=1)
293 set(CMAKE_REQUIRED_DEFINITIONS "-D__USE_MINGW_ANSI_STDIO=1")
295 set(CMAKE_REQUIRED_DEFINITIONS "-D_GNU_SOURCE")
298 CHECK_INCLUDE_FILE("valgrind/valgrind.h" HAVE_VALGRIND_H)
299 CHECK_INCLUDE_FILE("unistd.h" HAVE_UNISTD_H)
300 CHECK_INCLUDE_FILE("execinfo.h" HAVE_EXECINFO_H)
301 CHECK_INCLUDE_FILE("signal.h" HAVE_SIGNAL_H)
302 CHECK_INCLUDE_FILE("sys/param.h" HAVE_SYS_PARAM_H)
303 CHECK_INCLUDE_FILE("sys/sysctl.h" HAVE_SYS_SYSCTL_H)
304 CHECK_INCLUDE_FILE("ucontext.h" HAVE_UCONTEXT_H)
305 CHECK_INCLUDE_FILE("linux/futex.h" HAVE_FUTEX_H)
307 CHECK_FUNCTION_EXISTS(backtrace HAVE_BACKTRACE)
308 CHECK_FUNCTION_EXISTS(gettimeofday HAVE_GETTIMEOFDAY)
309 CHECK_FUNCTION_EXISTS(nanosleep HAVE_NANOSLEEP)
310 CHECK_FUNCTION_EXISTS(getdtablesize HAVE_GETDTABLESIZE)
311 CHECK_FUNCTION_EXISTS(sysconf HAVE_SYSCONF)
312 CHECK_FUNCTION_EXISTS(popen HAVE_POPEN)
313 CHECK_FUNCTION_EXISTS(process_vm_readv HAVE_PROCESS_VM_READV)
314 CHECK_FUNCTION_EXISTS(mmap HAVE_MMAP)
315 CHECK_FUNCTION_EXISTS(mremap HAVE_MREMAP)
317 CHECK_SYMBOL_EXISTS(vasprintf stdio.h HAVE_VASPRINTF)
319 # The detection of vasprintf fails on MinGW, assumingly because it's
320 # defined as an inline function in stdio.h instead of a regular
321 # function. So force the result to be 1 despite of the test.
322 set(HAVE_VASPRINTF 1)
325 #Check if __thread is defined
327 COMMAND "${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_thread_storage.c -o testprog"
328 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
329 RESULT_VARIABLE HAVE_thread_storage_run)
330 file(REMOVE testprog)
331 if(HAVE_thread_storage_run)
332 set(HAVE_THREAD_LOCAL_STORAGE 1)
334 set(HAVE_THREAD_LOCAL_STORAGE 0)
337 if(HAVE_MMAP AND HAVE_THREAD_LOCAL_STORAGE)
341 if(enable_model-checking)
342 message(STATUS "Warning: support for model-checking has been disabled because you are missing either mmap or __thread.")
344 SET(enable_model-checking 0)
353 if(enable_mallocators)
354 SET(HAVE_MALLOCATOR 1)
356 SET(HAVE_MALLOCATOR 0)
359 include(FindLibunwind)
361 SET(SIMGRID_DEP "${SIMGRID_DEP} -lunwind -lunwind-ptrace")
362 # This supposes that the host machine is either an AMD or a X86.
363 # This is deeply wrong, and should be fixed by manually loading -lunwind-PLAT (FIXME)
365 SET(SIMGRID_DEP "${SIMGRID_DEP} -lunwind-x86_64")
367 SET(SIMGRID_DEP "${SIMGRID_DEP} -lunwind-x86")
370 if(enable_model-checking)
371 message(FATAL_ERROR "Please either install the libunwind7-dev package (or equivalent) or turn off the model-checking option of SimGrid.")
375 if(enable_model-checking AND NOT "${CMAKE_SYSTEM}" MATCHES "Linux")
376 message(WARNING "Support for model-checking has not been enabled on ${CMAKE_SYSTEM}: disabling it")
377 set(enable_model-checking FALSE)
380 if(enable_model-checking)
384 SET(SIMGRID_DEP "${SIMGRID_DEP} -ldw")
390 if (enable_model-checking AND enable_ns3)
391 message(FATAL_ERROR "Cannot activate both model-checking and NS3 bindings: NS3 pull too much dependencies for the MC to work")
396 if("${CMAKE_SYSTEM}" MATCHES "Linux|FreeBSD")
398 SET(HAVE_PRIVATIZATION 1)
400 message (STATUS "Warning: no support for SMPI automatic privatization on this platform")
401 SET(HAVE_PRIVATIZATION 0)
407 #--------------------------------------------------------------------------------------------------
408 ### Check for GNU dynamic linker
409 CHECK_INCLUDE_FILE("dlfcn.h" HAVE_DLFCN_H)
411 execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_gnu_dynlinker.c ${DL_LIBRARY} -o test_gnu_ld
412 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
413 OUTPUT_VARIABLE HAVE_GNU_LD_compil
415 if(HAVE_GNU_LD_compil)
417 message(STATUS "Warning: test program toward GNU ld failed to compile:")
418 message(STATUS "${HAVE_GNU_LD_comp_output}")
420 execute_process(COMMAND ./test_gnu_ld
421 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
422 RESULT_VARIABLE HAVE_GNU_LD_run
423 OUTPUT_VARIABLE var_exec
426 if(NOT HAVE_GNU_LD_run)
428 message(STATUS "We are using GNU dynamic linker")
431 message(STATUS "Warning: error while checking for GNU ld:")
432 message(STATUS "Test output: '${var_exec}'")
433 message(STATUS "Exit status: ${HAVE_GNU_LD_run}")
435 file(REMOVE test_gnu_ld)
439 #--------------------------------------------------------------------------------------------------
440 ### Initialize of CONTEXT THREADS
442 set(HAVE_THREAD_CONTEXTS 0)
444 ### Test that we have a way to create semaphores
446 if(HAVE_SEM_OPEN_LIB)
447 execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_open.c -lpthread -o sem_open
448 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
449 OUTPUT_VARIABLE HAVE_SEM_OPEN_compil
452 # Test sem_open by compiling:
453 if(HAVE_SEM_OPEN_compil)
455 message(STATUS "Warning: sem_open not compilable")
456 message(STATUS "HAVE_SEM_OPEN_comp_output: ${HAVE_SEM_OPEN_comp_output}")
459 message(STATUS "sem_open is compilable")
462 # If we're not crosscompiling, we check by executing the program:
463 if (HAVE_SEM_OPEN AND NOT CMAKE_CROSSCOMPILING)
464 execute_process(COMMAND ./sem_open
465 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
466 RESULT_VARIABLE HAVE_SEM_OPEN_run
467 OUTPUT_VARIABLE var_compil
469 if (NOT HAVE_SEM_OPEN_run)
471 message(STATUS "sem_open is executable")
474 if(EXISTS "${CMAKE_BINARY_DIR}/sem_open")
475 message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_open exists!")
477 message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_open not exists!")
479 message(STATUS "Warning: sem_open not executable")
480 message(STATUS "Compilation output: '${var_compil}'")
481 message(STATUS "Exit result of sem_open: ${HAVE_SEM_OPEN_run}")
484 file(REMOVE sem_open)
489 if(HAVE_SEM_INIT_LIB)
490 execute_process(COMMAND ${CMAKE_C_COMPILER} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_sem_init.c -lpthread -o sem_init
491 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
492 RESULT_VARIABLE HAVE_SEM_INIT_run
493 OUTPUT_VARIABLE HAVE_SEM_INIT_compil)
495 # Test sem_init by compiling:
496 if(HAVE_SEM_INIT_compil)
498 message(STATUS "Warning: sem_init not compilable")
499 message(STATUS "HAVE_SEM_INIT_comp_output: ${HAVE_SEM_OPEN_comp_output}")
502 message(STATUS "sem_init is compilable")
505 # If we're not crosscompiling, we check by executing the program:
506 if (HAVE_SEM_INIT AND NOT CMAKE_CROSSCOMPILING)
507 execute_process(COMMAND ./sem_init
508 WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
509 RESULT_VARIABLE HAVE_SEM_INIT_run
510 OUTPUT_VARIABLE var_compil
512 if (NOT HAVE_SEM_INIT_run)
514 message(STATUS "sem_init is executable")
517 if(EXISTS "${CMAKE_BINARY_DIR}/sem_init")
518 message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_init exists!")
520 message(STATUS "Bin ${CMAKE_BINARY_DIR}/sem_init not exists!")
522 message(STATUS "Warning: sem_init not executable")
523 message(STATUS "Compilation output: '${var_compil}'")
524 message(STATUS "Exit result of sem_init: ${HAVE_SEM_INIT_run}")
527 file(REMOVE sem_init)
532 if(NOT HAVE_SEM_OPEN AND NOT HAVE_SEM_INIT)
533 message(FATAL_ERROR "Semaphores are not usable (neither sem_open nor sem_init is both compilable and executable), but they are mandatory to threads (you may need to mount /dev).")
536 set(HAVE_THREAD_CONTEXTS 1)
537 message("-- Support for thread context factory ok.")
540 set(HAVE_UCONTEXT_CONTEXTS 0)
541 if(NOT HAVE_UCONTEXT_H)
542 message("-- No ucontext factory: <ucontext.h> not found.")
544 message("-- No ucontext factory: Apple don't want us to use them.")
545 set(HAVE_UCONTEXT_H 0)
547 try_compile(compile_makecontext ${CMAKE_BINARY_DIR} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_makecontext.c
548 OUTPUT_VARIABLE compile_makecontext_output)
550 #If can have both context
551 if(compile_makecontext)
552 set(HAVE_UCONTEXT_CONTEXTS 1)
553 message("-- Support for ucontext factory ok.")
555 message("-- Error: <ucontext.h> exists, but makecontext is not compilable. Compilation output:\n ${compile_makecontext_output}")
556 message("-- No ucontext factory: makecontext() is not compilable.")
559 # Stack setup (size and address)
560 try_run(RUN_makecontext_VAR COMPILE_makecontext_VAR
561 ${CMAKE_BINARY_DIR} ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_stacksetup.c
562 RUN_OUTPUT_VARIABLE stack_setup)
564 LIST(LENGTH stack_setup stack_setup_len)
565 if("${stack_setup_len}" STREQUAL "2")
566 LIST(GET stack_setup 0 makecontext_addr)
567 LIST(GET stack_setup 1 makecontext_size)
568 set(sg_makecontext_stack_addr "#define sg_makecontext_stack_addr(skaddr) (${makecontext_addr})")
569 set(sg_makecontext_stack_size "#define sg_makecontext_stack_size(sksize) (${makecontext_size})")
571 message(FATAL_ERROR "Could not figure out the stack setup. Compil: ${RUN_makecontext_VAR}. Exec: ${COMPILE_makecontext_VAR}. Output: ${stack_setup}")
575 # Stack growth direction (upward or downward). Used for the following contexts: SysV, raw, Boost
576 try_run(RUN_stackgrowth_VAR COMPILE_stackgrowth_VAR
578 ${CMAKE_HOME_DIRECTORY}/tools/cmake/test_prog/prog_stackgrowth.c
579 RUN_OUTPUT_VARIABLE stack
580 COPY_FILE test_stackgrowth)
582 if("${stack}" STREQUAL "down")
583 set(PTH_STACKGROWTH "-1")
584 elseif("${stack}" STREQUAL "up")
585 set(PTH_STACKGROWTH "1")
587 if("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "x86_64")
588 set(PTH_STACKGROWTH "-1")
589 elseif("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "i686")
590 set(PTH_STACKGROWTH "-1")
592 message(FATAL_ERROR "Could not figure out the stack direction. Test prog returned: ${stack}; CMAKE_SYSTEM_PROCESSOR: ${CMAKE_SYSTEM_PROCESSOR}.")
595 # If the test ran well, remove the test binary
596 file(REMOVE test_stackgrowth)
597 #--------------------------------------------------------------------------------------------------
599 ### check for addr2line
600 find_path(ADDR2LINE NAMES addr2line PATHS NO_DEFAULT_PATHS)
602 set(ADDR2LINE "${ADDR2LINE}/addr2line")
608 if(EXISTS ${CMAKE_HOME_DIRECTORY}/.git/)
612 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
613 OUTPUT_VARIABLE remote
614 OUTPUT_STRIP_TRAILING_WHITESPACE)
615 #message(STATUS "Git remote: ${remote}")
616 execute_process(COMMAND git config --get remote.${remote}.url
617 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
619 OUTPUT_STRIP_TRAILING_WHITESPACE)
620 #message(STATUS "Git url: ${url}")
622 execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log --pretty=oneline --abbrev-commit -1
623 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
624 OUTPUT_VARIABLE GIT_VERSION
625 OUTPUT_STRIP_TRAILING_WHITESPACE)
626 message(STATUS "Git version: ${GIT_VERSION}")
628 execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log -n 1 --pretty=format:%ai .
629 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
630 OUTPUT_VARIABLE GIT_DATE
631 OUTPUT_STRIP_TRAILING_WHITESPACE)
632 message(STATUS "Git date: ${GIT_DATE}")
633 string(REGEX REPLACE " .*" "" GIT_VERSION "${GIT_VERSION}")
635 execute_process(COMMAND git --git-dir=${CMAKE_HOME_DIRECTORY}/.git log --pretty=format:%H -1
636 WORKING_DIRECTORY ${CMAKE_HOME_DIRECTORY}/.git/
637 OUTPUT_VARIABLE SIMGRID_GITHASH
638 OUTPUT_STRIP_TRAILING_WHITESPACE)
640 elseif(EXISTS ${CMAKE_HOME_DIRECTORY}/.gitversion)
641 FILE(STRINGS ${CMAKE_HOME_DIRECTORY}/.gitversion GIT_VERSION)
644 ### Generate the required headers and scripts
645 #############################################
647 # gcc makes no difference between "#define HAVE_FOOBAR" and "#define HAVE_FOOBAR 0" by default,
648 # but this too error prone. If you forget to include the config.h, you get weird segfaults.
649 # If you include it everywhere, everything gets recompiled everytime.
650 # So we include only where needed, and compile with -Wundef to notice the missing includes.
651 # But cmake sometimes defines to the empty definition (#define HAVE_VALGRIND_H).
652 # So we have to make sure that everything got a decent value before generating the files.
653 foreach(var HAVE_BACKTRACE HAVE_EXECINFO_H HAVE_FUTEX_H HAVE_GETDTABLESIZE HAVE_GETTIMEOFDAY HAVE_MMAP HAVE_NANOSLEEP HAVE_POPEN
654 HAVE_POSIX_GETTIME HAVE_PROCESS_VM_READV HAVE_SIGNAL_H HAVE_SYS_PARAM_H HAVE_SYS_SYSCTL_H HAVE_SYSCONF
655 HAVE_UCONTEXT_H HAVE_UNISTD_H HAVE_VALGRIND_H HAVE_VASPRINTF)
663 # Avoid triggering a (full) rebuild by touching the files if they did not really change
664 configure_file("${CMAKE_HOME_DIRECTORY}/tools/cmake/src/internal_config.h.in" "${CMAKE_BINARY_DIR}/src/internal_config.h.generated" @ONLY IMMEDIATE)
665 configure_file("${CMAKE_HOME_DIRECTORY}/include/simgrid_config.h.in" "${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated" @ONLY IMMEDIATE)
666 execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/src/internal_config.h.generated ${CMAKE_BINARY_DIR}/src/internal_config.h)
667 execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated ${CMAKE_BINARY_DIR}/include/simgrid_config.h)
668 file(REMOVE ${CMAKE_BINARY_DIR}/src/internal_config.h.generated)
669 file(REMOVE ${CMAKE_BINARY_DIR}/include/simgrid_config.h.generated)
671 # We need two versions of the SMPI scripts because they contain the path to the library
672 # so, it depends of whether SimGrid is installed, or run from the sources (during the build)
674 file(READ ${CMAKE_HOME_DIRECTORY}/src/smpi/smpitools.sh SMPITOOLS_SH) # Definitions shared amongst all SMPI scripts, inlined in each of them
676 ### SMPI script used when simgrid is installed
677 set(exec_prefix ${CMAKE_INSTALL_PREFIX})
678 set(includeflag "-I${CMAKE_INSTALL_PREFIX}/include -I${CMAKE_INSTALL_PREFIX}/include/smpi")
679 set(includedir "${CMAKE_INSTALL_PREFIX}/include")
680 set(libdir ${exec_prefix}/lib)
681 set(CMAKE_SMPI_COMMAND "export LD_LIBRARY_PATH=\"${CMAKE_INSTALL_PREFIX}/lib")
683 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
685 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
687 configure_file(${CMAKE_HOME_DIRECTORY}/include/smpi/mpif.h.in ${CMAKE_BINARY_DIR}/include/smpi/mpif.h @ONLY)
688 foreach(script cc cxx ff f90 run)
689 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpi${script}.in ${CMAKE_BINARY_DIR}/bin/smpi${script} @ONLY)
692 ### SMPI scripts used when compiling simgrid
693 set(exec_prefix "${CMAKE_BINARY_DIR}/smpi_script/")
694 set(includeflag "-I${CMAKE_HOME_DIRECTORY}/include -I${CMAKE_HOME_DIRECTORY}/include/smpi")
695 set(includeflag "${includeflag} -I${CMAKE_BINARY_DIR}/include -I${CMAKE_BINARY_DIR}/include/smpi")
696 set(includedir "${CMAKE_HOME_DIRECTORY}/include")
697 set(libdir "${CMAKE_BINARY_DIR}/lib")
698 set(CMAKE_SMPI_COMMAND "export LD_LIBRARY_PATH=\"${CMAKE_BINARY_DIR}/lib")
700 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:${NS3_LIBRARY_PATH}")
702 set(CMAKE_SMPI_COMMAND "${CMAKE_SMPI_COMMAND}:\${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}\"")
704 foreach(script cc cxx ff f90 run)
705 configure_file(${CMAKE_HOME_DIRECTORY}/src/smpi/smpi${script}.in ${CMAKE_BINARY_DIR}/smpi_script/bin/smpi${script} @ONLY)
709 foreach(script cc cxx ff f90 run)
710 execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/bin/smpi${script})
711 execute_process(COMMAND chmod a=rwx ${CMAKE_BINARY_DIR}/smpi_script/bin/smpi${script})
715 set(generated_headers_to_install
716 ${CMAKE_CURRENT_BINARY_DIR}/include/smpi/mpif.h
717 ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid_config.h
720 set(generated_headers ${CMAKE_CURRENT_BINARY_DIR}/src/internal_config.h )
722 set(generated_files_to_clean
724 ${generated_headers_to_install}
725 ${CMAKE_BINARY_DIR}/bin/smpicc
726 ${CMAKE_BINARY_DIR}/bin/smpicxx
727 ${CMAKE_BINARY_DIR}/bin/smpiff
728 ${CMAKE_BINARY_DIR}/bin/smpif90
729 ${CMAKE_BINARY_DIR}/bin/smpirun
730 ${CMAKE_BINARY_DIR}/bin/colorize
731 ${CMAKE_BINARY_DIR}/bin/simgrid_update_xml
732 ${CMAKE_BINARY_DIR}/examples/smpi/tracing/smpi_traced.trace
735 if(NOT "${CMAKE_BINARY_DIR}" STREQUAL "${CMAKE_HOME_DIRECTORY}")
736 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt COPYONLY)
737 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt COPYONLY)
738 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allReduce.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt COPYONLY)
739 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_barrier.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt COPYONLY)
740 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_bcast.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt COPYONLY)
741 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_with_isend.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt COPYONLY)
742 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_alltoall.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoall.txt COPYONLY)
743 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_alltoallv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoallv.txt COPYONLY)
744 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_waitall.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_waitall.txt COPYONLY)
745 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_reducescatter.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_reducescatter.txt COPYONLY)
746 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_gather.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_gather.txt COPYONLY)
747 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay/actions_allgatherv.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allgatherv.txt COPYONLY)
748 configure_file(${CMAKE_HOME_DIRECTORY}/teshsuite/smpi/hostfile ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile COPYONLY)
750 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/description_file ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/description_file COPYONLY)
751 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/README ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/README COPYONLY)
752 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/smpi_replay.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/smpi_replay.txt COPYONLY)
753 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt COPYONLY)
754 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt COPYONLY)
755 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt COPYONLY)
756 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt COPYONLY)
757 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt COPYONLY)
758 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt COPYONLY)
759 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt COPYONLY)
760 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt COPYONLY)
761 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt COPYONLY)
762 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt COPYONLY)
763 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt COPYONLY)
764 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt COPYONLY)
765 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt COPYONLY)
766 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt COPYONLY)
767 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt COPYONLY)
768 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt COPYONLY)
769 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt COPYONLY)
770 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt COPYONLY)
771 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt COPYONLY)
772 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt COPYONLY)
773 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt COPYONLY)
774 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt COPYONLY)
775 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt COPYONLY)
776 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt COPYONLY)
777 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt COPYONLY)
778 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt COPYONLY)
779 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt COPYONLY)
780 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt COPYONLY)
781 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt COPYONLY)
782 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt COPYONLY)
783 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt COPYONLY)
784 configure_file(${CMAKE_HOME_DIRECTORY}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt COPYONLY)
786 set(generated_files_to_clean
787 ${generated_files_to_clean}
788 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions0.txt
789 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions1.txt
790 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allReduce.txt
791 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_barrier.txt
792 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_bcast.txt
793 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_with_isend.txt
794 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoall.txt
795 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_alltoallv.txt
796 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_waitall.txt
797 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_gather.txt
798 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_allgatherv.txt
799 ${CMAKE_BINARY_DIR}/examples/smpi/replay/actions_reducescatter.txt
800 ${CMAKE_BINARY_DIR}/teshsuite/smpi/hostfile
801 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/description_file
802 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/README
803 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/smpi_replay.txt
804 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace0.txt
805 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace1.txt
806 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace2.txt
807 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace3.txt
808 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace4.txt
809 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace5.txt
810 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace6.txt
811 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace7.txt
812 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace8.txt
813 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace9.txt
814 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace10.txt
815 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace11.txt
816 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace12.txt
817 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace13.txt
818 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace14.txt
819 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace15.txt
820 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace16.txt
821 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace17.txt
822 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace18.txt
823 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace19.txt
824 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace20.txt
825 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace21.txt
826 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace22.txt
827 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace23.txt
828 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace24.txt
829 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace25.txt
830 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace26.txt
831 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace27.txt
832 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace28.txt
833 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace29.txt
834 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace30.txt
835 ${CMAKE_BINARY_DIR}/examples/smpi/replay_multiple/ti_traces_32_1/ti_trace31.txt
839 SET_DIRECTORY_PROPERTIES(PROPERTIES ADDITIONAL_MAKE_CLEAN_FILES
840 "${generated_files_to_clean}")
842 ### Define source packages for Libs
843 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/DefinePackages.cmake)
845 ### Build some Maintainer files
846 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MaintainerMode.cmake)
847 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/UnitTesting.cmake)
849 ### Setup gcc & clang flags
851 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/GCCFlags.cmake)
856 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MakeLib.cmake)
858 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/MakeLibWin.cmake)
862 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Java.cmake)
866 if(enable_memcheck_xml)
867 set(enable_memcheck true)
872 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Tests.cmake)
873 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/CTestConfig.cmake)
875 ### Define subdirectories
876 foreach(cmakefile ${CMAKEFILES_TXT})
877 string(REPLACE "/CMakeLists.txt" "" repository ${cmakefile})
878 add_subdirectory("${CMAKE_HOME_DIRECTORY}/${repository}")
881 ### Setup the distrib
882 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Distrib.cmake)
884 ### Build the docs if asked to
885 include(${CMAKE_HOME_DIRECTORY}/tools/cmake/Documentation.cmake)
887 ### Print the result of configuration
889 message("##########################################")
890 message("#### Content of src/internal_config.h ####")
891 message("##########################################")
892 file(STRINGS ${CMAKE_CURRENT_BINARY_DIR}/src/internal_config.h config_output)
893 LIST(REMOVE_AT config_output 0 1 2 3 4 5 6 7 8 9 10) # Pass the file header
894 foreach(line ${config_output})
897 message("##########################################")
898 message("#### Content of simgrid_config.h ####")
899 message("##########################################")
900 file(STRINGS ${CMAKE_CURRENT_BINARY_DIR}/include/simgrid_config.h config_output)
901 LIST(REMOVE_AT config_output 0 1 2 3 4 5 6 7 8 9 -1) # Pass the file header
902 foreach(line ${config_output})
905 message("##########################################")
906 message("#### End of configuration headers ####")
907 message("##########################################")
909 message("\nConfiguration of package `simgrid':")
910 message(" Home directory ..............: ${CMAKE_HOME_DIRECTORY}")
911 message(" Build Name ..................: ${BUILDNAME}")
912 message(" Cmake Generator .............: ${CMAKE_GENERATOR}")
913 message(" Site ........................: ${SITE}")
914 message(" Install prefix ..............: ${CMAKE_INSTALL_PREFIX}")
916 message(" Release .....................: simgrid-${release_version}${SIMGRID_VERSION_EXTRA} (release build)")
918 message(" Release .....................: simgrid-${release_version}${SIMGRID_VERSION_EXTRA} (development build)")
921 message(" Compiler: C .................: ${CMAKE_C_COMPILER} (id: ${CMAKE_C_COMPILER_ID})")
922 message(" version .............: ${CMAKE_C_COMPILER_VERSION}")
923 message(" is gnu ..............: ${CMAKE_COMPILER_IS_GNUCC}")
924 message(" Compiler: C++ ...............: ${CMAKE_CXX_COMPILER} (id: ${CMAKE_CXX_COMPILER_ID})")
925 message(" version .............: ${CMAKE_CXX_COMPILER_VERSION}")
927 message(" Compiler: Javac .............: ${Java_JAVAC_EXECUTABLE}")
928 message(" version .............: ${Java_VERSION_STRING}")
930 message(" SWIG ................: Version ${SWIG_VERSION} found.")
932 message(" SWIG ................: Missing.")
935 if(CMAKE_Fortran_COMPILER)
936 message(" Compiler: Fortran ...........: ${SAVED_Fortran_COMPILER} (id: ${CMAKE_Fortran_COMPILER_ID})")
937 message(" version .............: ${CMAKE_Fortran_COMPILER_VERSION}")
939 message(" Linker: .....................: ${CMAKE_LINKER}")
940 message(" version .............: ${LINKER_VERSION}")
941 message(" Make program: ...............: ${CMAKE_MAKE_PROGRAM}")
943 message(" CFlags ......................: ${CMAKE_C_FLAGS}")
944 message(" CXXFlags ....................: ${CMAKE_CXX_FLAGS}")
945 message(" LDFlags .....................: ${CMAKE_C_LINK_FLAGS}")
946 message(" with LTO ....................: ${enable_lto}")
950 message(" Compile NS-3 ................: yes (path: ${NS3_PATH})")
952 message(" Compile NS-3 ................: NO (hint: ${NS3_HINT})")
956 message(" Compile Java ................: yes")
957 message(" Native lib in jar .........: ${enable_lib_in_jar}")
959 message(" Compile Java ................: NO")
961 message(" Compile Lua .................: ${HAVE_LUA}")
962 message(" Compile Smpi ................: ${HAVE_SMPI}")
963 message(" Smpi fortran ..............: ${SMPI_FORTRAN}")
964 message(" MPICH3 testsuite ..........: ${enable_smpi_MPICH3_testsuite}")
965 message(" Privatization .............: ${HAVE_PRIVATIZATION}")
966 message(" PAPI support...............: ${HAVE_PAPI}")
967 message(" Compile Boost.Context support: ${HAVE_BOOST_CONTEXTS}")
969 message(" Maintainer mode .............: ${enable_maintainer_mode}")
970 message(" Documentation................: ${enable_documentation}")
971 message(" Model checking ..............: ${HAVE_MC}")
972 message(" Jedule mode ................: ${HAVE_JEDULE}")
973 message(" Graphviz mode ...............: ${HAVE_GRAPHVIZ}")
974 message(" Mallocators .................: ${enable_mallocators}")
976 message(" Simgrid dependencies ........: ${SIMGRID_DEP}")
979 execute_process(COMMAND ${CMAKE_COMMAND} -E make_directory ${PROJECT_BINARY_DIR}/Testing/Notes/)
980 file(WRITE ${PROJECT_BINARY_DIR}/Testing/Notes/Build "GIT version : ${GIT_VERSION}\n")
981 file(APPEND ${PROJECT_BINARY_DIR}/Testing/Notes/Build "Release : simgrid-${release_version}\n")